Re: [Protux-devel] more alsa stuff for mini-plan?

[address@hidden]

On Saturday 19 July 2003 05:23 pm, Luciano Giordana wrote:
> I am not sure if I understood the question, but if you asked that you
> ALWAYS need 48000 to start playback the answer is no.
>
> you can define  the default sample rate in .protuxrc, and start projects
> using 44100, so this will not be a requirement.


I have already defined 48kHz as the default sample rate, because my soundcard 
seems to have support not for 44100, but for 48000 .........
> > [ Trying 44100 Hz 1 channels 16 bits ... FAILED : ]
> > [ Trying 44100 Hz 2 channels 16 bits ... FAILED : ]
> > [ Trying 44100 Hz 1 channels 24 bits ... FAILED : ]
> > [ Trying 44100 Hz 2 channels 24 bits ... FAILED : ]
> > [ Trying 48000 Hz 1 channels 16 bits ... OK ]
> > [ Trying 48000 Hz 2 channels 16 bits ... OK ]
....... right?


BUT ... I also can't start play back after changing the dafault sample rate to 
48000! 
Everytime I get this error below .....

------------------------------------------------------------------

                [ Opening PLAYBACK bus : ENS1371 - 1st OUT (hw:0,1) ... ]

*** Error in int Bus::open(int, int, int, bool)
Invalid mode for bus ENS1371 - 1st OUT (hw:0,1) : 44100 Hz, 16 bits, STEREO

            LEAVING MustuxAudioBus.cc::open
        LEAVING MustuxAudioDeviceMapper.cc::open_bus_out

*** Error in int Mixer::go(long long int)
PLAYBACK THREAD START : FAILED : None of required playback bus could be open. 
Try changing bust out on the tracks, please

------------------------------------------------------------------------

But I can't change the suggested Bus out as mentioned above , because they are 
all greyed out in [BN] dialog .....

....... but there is a way to solve this .... (after creating a new project I 
can start play back and I'm able to record too) .... 



............
............
ENTERING Project.cc::create
        [ Creating new project 48000  NumSongs=2 ]
        [ Retrieving key DEFAULT_SAMPLE_RATE=48000  ]
        [ Retrieving key DEFAULT_BIT_DEPTH=16  ]
        ENTERING Song (CONSTRUCTOR)
            ENTERING MustuxDrawable (CONSTRUCTOR)
            LEAVING MustuxDrawable (CONSTRUCTOR)
            ENTERING MustuxDrawable (CONSTRUCTOR)
            LEAVING MustuxDrawable (CONSTRUCTOR)
            [ Retrieving key HZOOM_LEVEL=19  ]
            ENTERING Mixer (CONSTRUCTOR)
                [ --- Summary of all valid bus for this project ( 48000 Hz , 
STEREO, 16 bits --- ]
                [          ENS1371 - 1st OUT (hw:0,1) ]
                [          ENS1371 - 2nd OUT (hw:0,0) ]
                [          ENS1371 - 1st IN (hw:0,0) ]
                [ --- Buses not listed on this summary will be disable for 
this project --- ]
            LEAVING Mixer (CONSTRUCTOR)
............
...........


but this is just a temporary solution, because after restarting protux play 
back is not working again! 

-------------------------------------------------------------

                [ Opening PLAYBACK bus : ENS1371 - 1st OUT (hw:0,1) ... ]

*** Error in int Bus::open(int, int, int, bool)
Invalid mode for bus ENS1371 - 1st OUT (hw:0,1) : 44100 Hz, 16 bits, STEREO

            LEAVING MustuxAudioBus.cc::open
        LEAVING MustuxAudioDeviceMapper.cc::open_bus_out

*** Error in int Mixer::go(long long int)
PLAYBACK THREAD START : FAILED : None of required playback bus could be open. 
Try changing bust out on the tracks, please

    LEAVING Mixer.cc::go

---------------------------------------------------------------


greetings
Reinhard




> On Saturday 19 July 2003 10:22 am, Reinhard Amersberger wrote:
> > Hi,
> >
> > my other pc has a creative soundblaster live value ... or something like
> > that ... I forgot the correct name of this card, but it is just a cheap
> > one and it seems that I need 48kHz support to start playback, right?
> >
> > ENTERING MustuxAudioDeviceMapper.cc::init
> > [ Found ALSA supported Card : ENS1371 - Ensoniq AudioPCI ]
> > [ PLABACK Bus 0 [ card 0 ] : "ENS1371 - 1st OUT (hw:0,1)" created ]
> > [ PLABACK Bus 1 [ card 0 ] : "ENS1371 - 2nd OUT (hw:0,0)" created ]
> > [ MustuxAudioDeviceMapper::CAPTURE Bus 0 [ card 0 ] : "ENS1371 - 1st
> > IN (hw:0,0)" created ]
> >
> > [ Probing CAPTURE Buses
> > ------------------------------------------------ ]
> > [ Probing valid modes for bus 0:0 ... ]
> > [ Trying 22050 Hz 1 channels 16 bits ... FAILED : ]
> > [ Trying 22050 Hz 2 channels 16 bits ... FAILED : ]
> > [ Trying 32000 Hz 1 channels 16 bits ... OK ]
> > [ Trying 32000 Hz 2 channels 16 bits ... OK ]
> > [ Trying 44100 Hz 1 channels 16 bits ... FAILED : ]
> > [ Trying 44100 Hz 2 channels 16 bits ... FAILED : ]
> > [ Trying 44100 Hz 1 channels 24 bits ... FAILED : ]
> > [ Trying 44100 Hz 2 channels 24 bits ... FAILED : ]
> > [ Trying 48000 Hz 1 channels 16 bits ... OK ]
> > [ Trying 48000 Hz 2 channels 16 bits ... OK ]
> > [ Trying 48000 Hz 1 channels 24 bits ... FAILED : ]
> > [ Trying 48000 Hz 2 channels 24 bits ... FAILED : ]
> > [ Trying 96000 Hz 1 channels 16 bits ... FAILED : ]
> > [ Trying 96000 Hz 2 channels 16 bits ... FAILED : ]
> > [ Trying 96000 Hz 1 channels 24 bits ... FAILED : ]
> > [ Trying 96000 Hz 2 channels 24 bits ... FAILED : ]
> > [ Probing PLAYBACK Buses
> > ------------------------------------------------ ]
> > [ Probing valid modes for bus 0:0 ... ]
> > [ Trying 22050 Hz 1 channels 16 bits ... FAILED : ]
> > [ Trying 22050 Hz 2 channels 16 bits ... FAILED : ]
> > [ Trying 32000 Hz 1 channels 16 bits ... FAILED : ]
> > [ Trying 32000 Hz 2 channels 16 bits ... FAILED : ]
> > [ Trying 44100 Hz 1 channels 16 bits ... FAILED : ]
> > [ Trying 44100 Hz 2 channels 16 bits ... FAILED : ]
> > [ Trying 44100 Hz 1 channels 24 bits ... FAILED : ]
> > [ Trying 44100 Hz 2 channels 24 bits ... FAILED : ]
> > [ Trying 48000 Hz 1 channels 16 bits ... OK ]
> > [ Trying 48000 Hz 2 channels 16 bits ... OK ]
> > [ Trying 48000 Hz 1 channels 24 bits ... FAILED : ]
> > [ Trying 48000 Hz 2 channels 24 bits ... FAILED : ]
> > [ Trying 96000 Hz 1 channels 16 bits ... FAILED : ]
> > [ Trying 96000 Hz 2 channels 16 bits ... FAILED : ]
> > [ Trying 96000 Hz 1 channels 24 bits ... FAILED : ]
> > [ Trying 96000 Hz 2 channels 24 bits ... FAILED : ]
> >
> >
> >
> >
> > greetings
> > Reinhard
> >
> >
> >
> > _______________________________________________
> > Protux-devel mailing list
> > address@hidden
> > http://mail.nongnu.org/mailman/listinfo/protux-devel