Re: [Protux-devel] protux hangs during soundcard detection.

[Luciano Giordana]

I already made it read from protuxrc... didnt I commited ???? shame on me...

On Sunday 05 October 2003 18:26, Remon Sijrier wrote:
> Just a hint,
>
> The last time I saw your output, you seemed to use plughw. Now your MADM is
> using the "hw" device. Change "tryPlughw = no" in MADM into "tryPlughw =
> yes", or wait until Luciano has made it read from GlobalProperties. Seems
> that many sound-cards needs specific values to get to work with the "hw"
> device. Actually its ALSA who needs those values, else it doesn't work.
>
> Remon
>
> On Sunday 05 October 2003 22:54, address@hidden wrote:
> > On Saturday 27 September 2003 12:31 am, booker wrote:
> > > Am Donnerstag, 25. September 2003 03:45 schrieb Luciano Giordana:
> > > > I think I found a bug that was causing it, besides the artsd stuff.
> > > > Please update MADM.
> > >
> > > Yes, you managed it ... protux is running! :-)
> > >
> > > greetings
> > > Reinhard
> >
> > Ok, since this was fixed on my other machine using a creative
> > soundblaster128 (no emu chip, just a es1371)  ....
> >
> > address@hidden protux-0.19.5]$ lspcidrake -v | fgrep AUDIO
> > es1371          : Ensoniq|CT5880 [MULTIMEDIA_AUDIO] (vendor:1274
> > device:5880 subv:1274 subd:2000)
> >
> >
> > .... I can start protux, but can't choose a bus, because there are no one
> > available!
> > So I will show you the shell output below:
> > .....
> > LEAVING MustuxAudioBus.cc::valid_mode
> > [ --- Summary of all valid bus for this project ( 44100 Hz , STEREO, 16
> > bits --- ]
> > [ --- Buses not listed on this summary will be disable for this project
> > --- ] LEAVING Mixer (CONSTRUCTOR)
> > ......
> >
> >
> >
> >
> > But MADM seems to find my card, right?
> >
> >
> > ENTERING MustuxAudioDeviceMapper.cc::init
> >          [ Found ALSA supported Card : ENS1371 - Ensoniq AudioPCI ]
> >          [ PLABACK Bus 0 [ card 0 ] : "ENS1371 - 1st OUT (hw:0,1)"
> > created ] [ PLABACK Bus 1 [ card 0 ] : "ENS1371 - 2nd OUT (hw:0,0)"
> > created ] [ MustuxAudioDeviceMapper::CAPTURE Bus 0 [ card 0 ] : "ENS1371
> > - 1st IN (hw:0,0)" created ]
> >
> >
> >
> >
> > And ...Probing CAPTURE Buses shows this .....
> >
> >
> >
> > [ Probing CAPTURE Buses ------------------------------------------------
> > ] ENTERING MustuxAudioBus.cc::probe_valid_modes
> >             [ Probing valid modes for bus hw:0,0 ... ]
> >             [   Trying 22050 Hz MONO 16 bits :  FAILED :
> > ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
> >             [   Trying 32000 Hz MONO 16 bits :  OK ]
> >             [   Trying 44100 Hz MONO 16 bits :  FAILED :
> > ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
> >             [   Trying 44100 Hz MONO 20 bits :  FAILED :
> > ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
> >             [   Trying 44100 Hz MONO 24 bits :  FAILED :
> > ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
> >             [   Trying 44100 Hz MONO 32 bits :  FAILED :
> > ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
> >             [   Trying 44100 Hz MONO 32 bits :  FAILED :
> > ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
> >             [   Trying 44100 Hz MONO 64 bits :  FAILED :
> > ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
> >             [   Trying 48000 Hz MONO 16 bits :  OK ]
> >             [   Trying 48000 Hz MONO 20 bits :  FAILED :
> > ERROR_BUS_DOES_NOT_SUPPORT_THIS_BIT_DEPTH ]
> >             [   Trying 48000 Hz MONO 24 bits :  FAILED :
> > ERROR_BUS_DOES_NOT_SUPPORT_THIS_BIT_DEPTH ]
> >             [   Trying 48000 Hz MONO 32 bits :  FAILED :
> > ERROR_BUS_DOES_NOT_SUPPORT_THIS_BIT_DEPTH ]
> >             [   Trying 48000 Hz MONO 64 bits :  FAILED :
> > ERROR_BUS_DOES_NOT_SUPPORT_THIS_BIT_DEPTH ]
> >             [   Trying 48000 Hz MONO 16 bits :  OK ]
> >             [   Trying 96000 Hz MONO 20 bits :  FAILED :
> > ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
> >             [   Trying 96000 Hz MONO 24 bits :  FAILED :
> > ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
> >             [   Trying 96000 Hz MONO 32 bits :  FAILED :
> > ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
> >             [   Trying 96000 Hz MONO 64 bits :  FAILED :
> > ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
> >             [   Trying 22050 Hz STEREO 16 bits :  FAILED :
> > ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
> >             [   Trying 32000 Hz STEREO 16 bits :  OK ]
> >             [   Trying 44100 Hz STEREO 16 bits :  FAILED :
> > ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
> >             [   Trying 44100 Hz STEREO 20 bits :  FAILED :
> > ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
> >             [   Trying 44100 Hz STEREO 24 bits :  FAILED :
> > ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
> >             [   Trying 44100 Hz STEREO 32 bits :  FAILED :
> > ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
> >             [   Trying 44100 Hz STEREO 32 bits :  FAILED :
> > ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
> >             [   Trying 44100 Hz STEREO 64 bits :  FAILED :
> > ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
> >             [   Trying 48000 Hz STEREO 16 bits :  OK ]
> >             [   Trying 48000 Hz STEREO 20 bits :  FAILED :
> > ERROR_BUS_DOES_NOT_SUPPORT_THIS_BIT_DEPTH ]
> >             [   Trying 48000 Hz STEREO 24 bits :  FAILED :
> > ERROR_BUS_DOES_NOT_SUPPORT_THIS_BIT_DEPTH ]
> >             [   Trying 48000 Hz STEREO 32 bits :  FAILED :
> > ERROR_BUS_DOES_NOT_SUPPORT_THIS_BIT_DEPTH ]
> >             [   Trying 48000 Hz STEREO 64 bits :  FAILED :
> > ERROR_BUS_DOES_NOT_SUPPORT_THIS_BIT_DEPTH ]
> >             [   Trying 48000 Hz STEREO 16 bits :  OK ]
> >             [   Trying 96000 Hz STEREO 20 bits :  FAILED :
> > ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
> >             [   Trying 96000 Hz STEREO 24 bits :  FAILED :
> > ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
> >             [   Trying 96000 Hz STEREO 32 bits :  FAILED :
> > ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
> >             [   Trying 96000 Hz STEREO 64 bits :  FAILED :
> > ERROR_BUS_DOES_NOT_SUPPORT_THIS_SAMPLE_RATE ]
> >          LEAVING MustuxAudioBus.cc::probe_valid_modes
> >
> >
> > Does that mean this card can't support 44100Hz, 16 bit ?
> >
> > However ... I switched the sample rate <SP> to 48000 Hz and it works
> > (also recording) although there is still no bus available in [BN] or [VB]
> > ... is this ok?
> >
> > greetings
> > Reinhard
> >
> >
> > _______________________________________________
> > Protux-devel mailing list
> > address@hidden
> > http://mail.nongnu.org/mailman/listinfo/protux-devel
>
> _______________________________________________
> Protux-devel mailing list
> address@hidden
> http://mail.nongnu.org/mailman/listinfo/protux-devel

-- 
Best Regards
--
Luciano Giordana - Musician - Java/GNU C++ Developer 
Free Software Evangelist - Project Mustux - Musician Tools for GNU/Linux
http://www.freesoftware.fsf.org/mustux