Re: [Qemu-arm] [Qemu-devel] [PATCH 06/10] sdhci_sysbus: Create SD card device in users, not the device itself

[Peter Crosthwaite]

On Thu, Dec 17, 2015 at 04:18:19PM -0800, Alistair Francis wrote:
> On Fri, Dec 11, 2015 at 8:37 AM, Peter Maydell <address@hidden> wrote:
> > Move the creation of the SD card device from the sdhci_sysbus
> > device itself into the boards that create these devices.
> > This allows us to remove the cannot_instantiate_with_device_add
> > notation because we no longer call drive_get_next in the device
> > model.
> >
> > Signed-off-by: Peter Maydell <address@hidden>
> > ---
> >  hw/arm/xilinx_zynq.c | 17 ++++++++++++++++-
> >  hw/arm/xlnx-ep108.c  | 19 +++++++++++++++++++
> >  hw/sd/sdhci.c        | 22 ----------------------
> >  3 files changed, 35 insertions(+), 23 deletions(-)
> >
> > diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c
> > index 1c1a445..3195055 100644
> > --- a/hw/arm/xilinx_zynq.c
> > +++ b/hw/arm/xilinx_zynq.c
> > @@ -27,6 +27,7 @@
> >  #include "hw/misc/zynq-xadc.h"
> >  #include "hw/ssi.h"
> >  #include "qemu/error-report.h"
> > +#include "hw/sd/sd.h"
> >
> >  #define NUM_SPI_FLASHES 4
> >  #define NUM_QSPI_FLASHES 2
> > @@ -153,8 +154,10 @@ static void zynq_init(MachineState *machine)
> >      MemoryRegion *address_space_mem = get_system_memory();
> >      MemoryRegion *ext_ram = g_new(MemoryRegion, 1);
> >      MemoryRegion *ocm_ram = g_new(MemoryRegion, 1);
> > -    DeviceState *dev;
> > +    DeviceState *dev, *carddev;
> >      SysBusDevice *busdev;
> > +    DriveInfo *di;
> > +    BlockBackend *blk;
> >      qemu_irq pic[64];
> >      Error *err = NULL;
> >      int n;
> > @@ -260,11 +263,23 @@ static void zynq_init(MachineState *machine)
> >      sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xE0100000);
> >      sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[56-IRQ_OFFSET]);
> >
> > +    di = drive_get_next(IF_SD);
> > +    blk = di ? blk_by_legacy_dinfo(di) : NULL;
> > +    carddev = qdev_create(qdev_get_child_bus(dev, "sd-bus"), TYPE_SD);
> > +    qdev_prop_set_drive(carddev, "drive", blk, &error_fatal);
> > +    object_property_set_bool(OBJECT(carddev), true, "realized", 
> > &error_fatal);
> > +
> >      dev = qdev_create(NULL, "generic-sdhci");
> >      qdev_init_nofail(dev);
> >      sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xE0101000);
> >      sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[79-IRQ_OFFSET]);
> >
> > +    di = drive_get_next(IF_SD);
> > +    blk = di ? blk_by_legacy_dinfo(di) : NULL;
> > +    carddev = qdev_create(qdev_get_child_bus(dev, "sd-bus"), TYPE_SD);
> > +    qdev_prop_set_drive(carddev, "drive", blk, &error_fatal);
> > +    object_property_set_bool(OBJECT(carddev), true, "realized", 
> > &error_fatal);
> > +
> >      dev = qdev_create(NULL, TYPE_ZYNQ_XADC);
> >      qdev_init_nofail(dev);
> >      sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xF8007100);
> > diff --git a/hw/arm/xlnx-ep108.c b/hw/arm/xlnx-ep108.c
> > index 85b978f..cb95d32 100644
> > --- a/hw/arm/xlnx-ep108.c
> > +++ b/hw/arm/xlnx-ep108.c
> > @@ -34,6 +34,7 @@ static void xlnx_ep108_init(MachineState *machine)
> >  {
> >      XlnxEP108 *s = g_new0(XlnxEP108, 1);
> >      Error *err = NULL;
> > +    int i;
> >
> >      object_initialize(&s->soc, sizeof(s->soc), TYPE_XLNX_ZYNQMP);
> >      object_property_add_child(OBJECT(machine), "soc", OBJECT(&s->soc),
> > @@ -45,6 +46,24 @@ static void xlnx_ep108_init(MachineState *machine)
> >          exit(1);
> >      }
> >
> > +    /* Create and plug in the SD cards */
> > +    for (i = 0; i < XLNX_ZYNQMP_NUM_SDHCI; i++) {
> > +        BusState *bus;
> > +        DriveInfo *di = drive_get_next(IF_SD);
> > +        BlockBackend *blk = di ? blk_by_legacy_dinfo(di) : NULL;
> > +        DeviceState *carddev;
> > +
> > +        bus = qdev_get_child_bus(DEVICE(&s->soc.sdhci[i]), "sd-bus");
> 
> This looks like the same thing I was trying to avoid with my SPI
> patches. We were trying to avoid the machine reaching into the SoC
> when getting the child busses. Instead expose the bus to the SoC so
> the board can just get it straight from there.
> 

I have an alternate QOM fix that should enable this. Will comment the SPI
discussion.

Regards,
Peter

> > +        if (!bus) {
> > +            error_report("No SD bus found for SD card %d", i);
> > +            exit(1);
> > +        }
> > +        carddev = qdev_create(bus, TYPE_SD);
> > +        qdev_prop_set_drive(carddev, "drive", blk, &error_fatal);
> > +        object_property_set_bool(OBJECT(carddev), true, "realized",
> > +                                 &error_fatal);
> > +    }
> > +
> 
> I also think this should go after the other memory creation, not before.
> 
> Thanks,
> 
> Alistair
> 
> >      if (machine->ram_size > EP108_MAX_RAM_SIZE) {
> >          error_report("WARNING: RAM size " RAM_ADDR_FMT " above max 
> > supported, "
> >                       "reduced to %llx", machine->ram_size, 
> > EP108_MAX_RAM_SIZE);
> > diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
> > index 17e08a2..c8e3865 100644
> > --- a/hw/sd/sdhci.c
> > +++ b/hw/sd/sdhci.c
> > @@ -1296,26 +1296,6 @@ static void sdhci_sysbus_realize(DeviceState *dev, 
> > Error ** errp)
> >  {
> >      SDHCIState *s = SYSBUS_SDHCI(dev);
> >      SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
> > -    DriveInfo *di;
> > -    BlockBackend *blk;
> > -    DeviceState *carddev;
> > -
> > -    /* Create and plug in the sd card.
> > -     * FIXME: this should be done by the users of this device so we
> > -     * do not use drive_get_next() here.
> > -     */
> > -    di = drive_get_next(IF_SD);
> > -    blk = di ? blk_by_legacy_dinfo(di) : NULL;
> > -
> > -    carddev = qdev_create(qdev_get_child_bus(dev, "sd-bus"), TYPE_SD);
> > -    qdev_prop_set_drive(carddev, "drive", blk, errp);
> > -    if (*errp) {
> > -        return;
> > -    }
> > -    object_property_set_bool(OBJECT(carddev), true, "realized", errp);
> > -    if (*errp) {
> > -        return;
> > -    }
> >
> >      s->buf_maxsz = sdhci_get_fifolen(s);
> >      s->fifo_buffer = g_malloc0(s->buf_maxsz);
> > @@ -1333,8 +1313,6 @@ static void sdhci_sysbus_class_init(ObjectClass 
> > *klass, void *data)
> >      dc->vmsd = &sdhci_vmstate;
> >      dc->props = sdhci_sysbus_properties;
> >      dc->realize = sdhci_sysbus_realize;
> > -    /* Reason: instance_init() method uses drive_get_next() */
> > -    dc->cannot_instantiate_with_device_add_yet = true;
> >  }
> >
> >  static const TypeInfo sdhci_sysbus_info = {
> > --
> > 1.9.1
> >
> >