qemu-arm
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-arm] [PATCH] bios-linker-loader: document+validate input


From: Michael S. Tsirkin
Subject: Re: [Qemu-arm] [PATCH] bios-linker-loader: document+validate input
Date: Tue, 23 Feb 2016 18:50:31 +0200

On Tue, Feb 23, 2016 at 05:24:02PM +0100, Igor Mammedov wrote:
> On Sun, 21 Feb 2016 15:03:04 +0200
> "Michael S. Tsirkin" <address@hidden> wrote:
> 
> > While guest/host ABI is documented in hw/acpi/bios-linker-loader.c,
> > the API was left undocumented.
> > 
> > This adds documentation for all API functions.
> > 
> > Additionally, input is validated to make sure all
> > pointers fall within range of provided files.
> > 
> > To allow this validation for checksum commands,
> > bios_linker_loader_add_checksum is changed to accept GArray * in place
> > of void *.
> > 
> > Reported-by: Igor Mammedov <address@hidden>
> > Signed-off-by: Michael S. Tsirkin <address@hidden>
> > ---
> > 
> > Igor, I hope this validation addresses most of your comments,
> > and makes the API clear.
> > 
> > You had ideas to add a wrapper for bios_linker_loader_add_pointer
> > that pushes and initializes the pointer automatically.
> > If you still think it's a good idea, it should now be easy
> > for you to implement this wrapper yourself.
> > 
> > 
> >  include/hw/acpi/bios-linker-loader.h |  2 +-
> >  hw/acpi/aml-build.c                  |  2 +-
> >  hw/acpi/bios-linker-loader.c         | 91 
> > ++++++++++++++++++++++++++++++++++--
> >  hw/arm/virt-acpi-build.c             |  3 +-
> >  hw/i386/acpi-build.c                 |  3 +-
> >  5 files changed, 92 insertions(+), 9 deletions(-)
> > 
> > diff --git a/include/hw/acpi/bios-linker-loader.h 
> > b/include/hw/acpi/bios-linker-loader.h
> > index 498c0af..e54b6b4 100644
> > --- a/include/hw/acpi/bios-linker-loader.h
> > +++ b/include/hw/acpi/bios-linker-loader.h
> > @@ -13,7 +13,7 @@ void bios_linker_loader_alloc(GArray *linker,
> >                                bool alloc_fseg);
> >  
> >  void bios_linker_loader_add_checksum(GArray *linker, const char *file,
> > -                                     void *table,
> > +                                     GArray *table,
> >                                       void *start, unsigned size,
> >                                       uint8_t *checksum);
> >  
> > diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c
> > index 603068b..6675535 100644
> > --- a/hw/acpi/aml-build.c
> > +++ b/hw/acpi/aml-build.c
> > @@ -1451,7 +1451,7 @@ build_header(GArray *linker, GArray *table_data,
> >      h->checksum = 0;
> >      /* Checksum to be filled in by Guest linker */
> >      bios_linker_loader_add_checksum(linker, ACPI_BUILD_TABLE_FILE,
> > -                                    table_data->data, h, len, 
> > &h->checksum);
> > +                                    table_data, h, len, &h->checksum);
> >  }
> >  
> >  void *acpi_data_push(GArray *table_data, unsigned size)
> > diff --git a/hw/acpi/bios-linker-loader.c b/hw/acpi/bios-linker-loader.c
> > index e04d60a..ace9abb 100644
> > --- a/hw/acpi/bios-linker-loader.c
> > +++ b/hw/acpi/bios-linker-loader.c
> > @@ -25,6 +25,13 @@
> >  
> >  #include "qemu/bswap.h"
> >  
> > +/*
> > + * Linker/loader is a paravirtualized interface that passes commands to 
> > guest.
> > + * The commands can be used to request guest to
> > + * - allocate memory chunks and initialize them from QEMU FW CFG files
> > + * - link allocated chunks by storing pointer to one chunk into another
> > + * - calculate ACPI checksum of part of the chunk and store into same chunk
> > + */
> >  #define BIOS_LINKER_LOADER_FILESZ FW_CFG_MAX_FILE_PATH
> >  
> >  struct BiosLinkerLoaderEntry {
> > @@ -88,6 +95,12 @@ enum {
> >      BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG = 0x2,
> >  };
> >  
> > +/*
> > + * bios_linker_loader_init: allocate a new linker file blob array.
> > + *
> > + * After initialization, linker commands can be added, and will
> > + * be stored in the array.
> > + */
> >  GArray *bios_linker_loader_init(void)
> >  {
> >      return g_array_new(false, true /* clear */, 1);
> > @@ -99,6 +112,16 @@ void *bios_linker_loader_cleanup(GArray *linker)
> >      return g_array_free(linker, false);
> >  }
> >  
> > +/*
> > + * bios_linker_loader_alloc: ask guest to load file into guest memory.
> > + *
> > + * @linker: linker file blob array
> > + * @file: file to be loaded
> > + * @alloc_align: required minimal alignment in bytes. Must be a power of 2.
> > + * @alloc_fseg: request allocation in FSEG zone (useful for the RSDP ACPI 
> > table)
> > + *
> > + * Note: this command must precede any other linker command using this 
> > file.
> > + */
> >  void bios_linker_loader_alloc(GArray *linker,
> >                                const char *file,
> >                                uint32_t alloc_align,
> > @@ -106,6 +129,8 @@ void bios_linker_loader_alloc(GArray *linker,
> >  {
> >      BiosLinkerLoaderEntry entry;
> >  
> > +    assert(!(alloc_align & (alloc_align - 1)));
> > +
> >      memset(&entry, 0, sizeof entry);
> >      strncpy(entry.alloc.file, file, sizeof entry.alloc.file - 1);
> >      entry.command = cpu_to_le32(BIOS_LINKER_LOADER_COMMAND_ALLOCATE);
> > @@ -118,23 +143,77 @@ void bios_linker_loader_alloc(GArray *linker,
> >      g_array_prepend_vals(linker, &entry, sizeof entry);
> >  }
> >  
> > +/*
> > + * bios_linker_loader_add_checksum: ask guest to add checksum of file data
> > + * into (same) file at the specified pointer.
> > + *
> > + * Checksum calculation simply sums -X for each byte X in the range
> > + * using 8-bit math (i.e. ACPI checksum).
> > + *
> > + * @linker: linker file blob array
> > + * @file: file that includes the checksum to be calculated
> > + *        and the data to be checksummed
> > + * @table: @file blob contents
> > + * @start, @size: range of data to checksum
> > + * @checksum: location of the checksum to be patched within file blob
> > + *
> > + * Notes:
> > + * - checksum byte initial value must have been pushed into @table
> > + *   and reside at address @checksum.
> > + * - @size bytes must have been pushed into @table and reside at address
> > + *   @start.
> > + * - Guest calculates checksum of specified range of data, result is added 
> > to
> > + *   initial value at @checksum into copy of @file in Guest memory.
> > + * - Range might include the checksum itself.
> > + * - To avoid confusion, caller must always put 0x0 at @checksum.
> > + * - @file must be loaded into Guest memory using bios_linker_loader_alloc
> > + */
> >  void bios_linker_loader_add_checksum(GArray *linker, const char *file,
> > -                                     void *table,
> > +                                     GArray *table,
> >                                       void *start, unsigned size,
> >                                       uint8_t *checksum)
> >  {
> >      BiosLinkerLoaderEntry entry;
> > +    ptrdiff_t checksum_offset = (gchar *)checksum - table->data;
> > +    ptrdiff_t start_offset = (gchar *)start - table->data;
> > +
> > +    assert(checksum_offset >= 0);
> > +    assert(start_offset >= 0);
> > +    assert(checksum_offset + 1 <= table->len);
> > +    assert(start_offset + size <= table->len);
> > +    assert(*checksum == 0x0);
> >  
> >      memset(&entry, 0, sizeof entry);
> >      strncpy(entry.cksum.file, file, sizeof entry.cksum.file - 1);
> >      entry.command = cpu_to_le32(BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM);
> > -    entry.cksum.offset = cpu_to_le32(checksum - (uint8_t *)table);
> > -    entry.cksum.start = cpu_to_le32((uint8_t *)start - (uint8_t *)table);
> > +    entry.cksum.offset = cpu_to_le32(checksum_offset);
> > +    entry.cksum.start = cpu_to_le32(start_offset);
> >      entry.cksum.length = cpu_to_le32(size);
> >  
> >      g_array_append_vals(linker, &entry, sizeof entry);
> >  }
> >  
> > +/*
> > + * bios_linker_loader_add_pointer: ask guest to add address of source file
> > + * into destination file at the specified pointer.
> > + *
> > + * @linker: linker file blob array
> > + * @dest_file: destination file that must be changed
> > + * @src_file: source file who's address must be taken
> > + * @table: @dest_file blob contents array
> > + * @pointer: location of the pointer to be patched within destination file 
> > blob
> > + * @pointer_size: size of pointer to be patched, in bytes
> > + *
> > + * Notes:
> > + * - @pointer_size bytes must have been pushed into @table
> > + *   and reside at address @pointer.
> > + * - Guest address is added to initial value at @pointer
> > + *   into copy of @dest_file in Guest memory.
> > + *   e.g. to get start of src_file in guest memory, put 0x0 there
> > + *   to get address of a field at offset 0x10 in src_file, put 0x10 there
> 
> I'd rather API use explicit offsets as arguments instead of
> doing above.
> 
>  + * @linker: linker file blob array
>  + * @dest_file: destination file that must be changed
>  + * @src_file: source file who's address must be taken
>  + * @src_offset: location within source file to which @address@hidden will 
> point to after ADD_POINTER command is executed
>  + * @dst_patched_offset: location within destination file blob to be patched 
> with a pointer to @src_file allocated blob in Guest memory + @src_offset
>  + * @dst_patched_offset: size of pointer to be patched, in bytes

I kind of like the (&x, sizeof x). This matches how memcpy etc
all work.  But go ahead - cook up a patch on top and I'll review.
Maybe add a wrapper for this one so you do not have to rework
all code.

> > + * - Both @dest_file and @src_file must be
> > + *   loaded into Guest memory using bios_linker_loader_alloc
> > + */
> >  void bios_linker_loader_add_pointer(GArray *linker,
> >                                      const char *dest_file,
> >                                      const char *src_file,
> > @@ -142,7 +221,10 @@ void bios_linker_loader_add_pointer(GArray *linker,
> >                                      uint8_t pointer_size)
> >  {
> >      BiosLinkerLoaderEntry entry;
> > -    size_t offset = (gchar *)pointer - table->data;
> > +    ptrdiff_t offset = (gchar *)pointer - table->data;
> > +
> > +    assert(offset >= 0);
> > +    assert(offset + pointer_size <= table->len);
> >  
> >      memset(&entry, 0, sizeof entry);
> >      strncpy(entry.pointer.dest_file, dest_file,
> > @@ -150,7 +232,6 @@ void bios_linker_loader_add_pointer(GArray *linker,
> >      strncpy(entry.pointer.src_file, src_file,
> >              sizeof entry.pointer.src_file - 1);
> >      entry.command = cpu_to_le32(BIOS_LINKER_LOADER_COMMAND_ADD_POINTER);
> > -    assert(table->len >= offset + pointer_size);
> >      entry.pointer.offset = cpu_to_le32(offset);
> >      entry.pointer.size = pointer_size;
> >      assert(pointer_size == 1 || pointer_size == 2 ||
> > diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
> > index 9876932..c076bbf 100644
> > --- a/hw/arm/virt-acpi-build.c
> > +++ b/hw/arm/virt-acpi-build.c
> > @@ -359,7 +359,8 @@ build_rsdp(GArray *rsdp_table, GArray *linker, unsigned 
> > rsdt)
> >      rsdp->checksum = 0;
> >      /* Checksum to be filled by Guest linker */
> >      bios_linker_loader_add_checksum(linker, ACPI_BUILD_RSDP_FILE,
> > -                                    rsdp, rsdp, sizeof *rsdp, 
> > &rsdp->checksum);
> > +                                    rsdp_table, rsdp, sizeof *rsdp,
> > +                                    &rsdp->checksum);
> >  
> >      return rsdp_table;
> >  }
> > diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
> > index 36752b2..b654b0d 100644
> > --- a/hw/i386/acpi-build.c
> > +++ b/hw/i386/acpi-build.c
> > @@ -2532,7 +2532,8 @@ build_rsdp(GArray *rsdp_table, GArray *linker, 
> > unsigned rsdt)
> >      rsdp->checksum = 0;
> >      /* Checksum to be filled by Guest linker */
> >      bios_linker_loader_add_checksum(linker, ACPI_BUILD_RSDP_FILE,
> > -                                    rsdp, rsdp, sizeof *rsdp, 
> > &rsdp->checksum);
> > +                                    rsdp_table, rsdp, sizeof *rsdp,
> > +                                    &rsdp->checksum);
> >  
> >      return rsdp_table;
> >  }



reply via email to

[Prev in Thread] Current Thread [Next in Thread]