qemu-arm
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-arm] [PATCH v5 9/9] tests: add a m25p80 test


From: Cédric Le Goater
Subject: [Qemu-arm] [PATCH v5 9/9] tests: add a m25p80 test
Date: Tue, 28 Jun 2016 20:24:30 +0200

This test uses the palmetto platform and the AST2400 SPI controller to
test the m25p80 flash module device model. The flash model is defined
by the platform (n25q256a) and it would be nice to find way to control
it, using a property probably.

Signed-off-by: Cédric Le Goater <address@hidden>
Reviewed-by: Peter Maydell <address@hidden>
---

 Changes since v4:

 - fixed Makefile targets
 - replaced -M with -m in qtest command line
 
 Changes since v2:

 - changed mkstemp() path prefix
 
 Changes since v1:

 - fixed guest args to use -drive and not -mtdblock

 tests/Makefile.include |   2 +
 tests/m25p80-test.c    | 242 +++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 244 insertions(+)
 create mode 100644 tests/m25p80-test.c

diff --git a/tests/Makefile.include b/tests/Makefile.include
index 6c09962f7581..149f92585c1b 100644
--- a/tests/Makefile.include
+++ b/tests/Makefile.include
@@ -252,6 +252,7 @@ gcov-files-sparc-y += hw/timer/m48t59.c
 gcov-files-sparc64-y += hw/timer/m48t59.c
 check-qtest-arm-y = tests/tmp105-test$(EXESUF)
 check-qtest-arm-y += tests/ds1338-test$(EXESUF)
+check-qtest-arm-y += tests/m25p80-test$(EXESUF)
 gcov-files-arm-y += hw/misc/tmp105.c
 check-qtest-arm-y += tests/virtio-blk-test$(EXESUF)
 gcov-files-arm-y += arm-softmmu/hw/block/virtio-blk.c
@@ -568,6 +569,7 @@ tests/bios-tables-test$(EXESUF): tests/bios-tables-test.o \
 tests/pxe-test$(EXESUF): tests/pxe-test.o tests/boot-sector.o $(libqos-obj-y)
 tests/tmp105-test$(EXESUF): tests/tmp105-test.o $(libqos-omap-obj-y)
 tests/ds1338-test$(EXESUF): tests/ds1338-test.o $(libqos-imx-obj-y)
+tests/m25p80-test$(EXESUF): tests/m25p80-test.o
 tests/i440fx-test$(EXESUF): tests/i440fx-test.o $(libqos-pc-obj-y)
 tests/q35-test$(EXESUF): tests/q35-test.o $(libqos-pc-obj-y)
 tests/fw_cfg-test$(EXESUF): tests/fw_cfg-test.o $(libqos-pc-obj-y)
diff --git a/tests/m25p80-test.c b/tests/m25p80-test.c
new file mode 100644
index 000000000000..305c52319a33
--- /dev/null
+++ b/tests/m25p80-test.c
@@ -0,0 +1,242 @@
+/*
+ * QTest testcase for the M25P80 Flash (Using the AST2400 SPI Controller)
+ *
+ * Copyright (C) 2016 IBM Corp.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to 
deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 
FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/bswap.h"
+#include "libqtest.h"
+
+/*
+ * AST2400 SPI Controller registers
+ */
+#define R_CONF              0x00
+#define   CONF_ENABLE_W0       (1 << 16)
+#define R_CE_CTRL           0x04
+#define   CRTL_EXTENDED0       0  /* 32 bit addressing for SPI */
+#define R_CTRL0             0x10
+#define   CTRL_CE_STOP_ACTIVE  (1 << 2)
+#define   CTRL_USERMODE        0x3
+
+#define AST2400_FMC_BASE    0x1E620000
+#define AST2400_FLASH_BASE  0x20000000
+
+/*
+ * Flash commands
+ */
+enum {
+    JEDEC_READ = 0x9f,
+    BULK_ERASE = 0xc7,
+    READ = 0x03,
+    PP = 0x02,
+    WREN = 0x6,
+    EN_4BYTE_ADDR = 0xB7,
+    ERASE_SECTOR = 0xd8,
+};
+
+#define FLASH_JEDEC         0x20ba19  /* n25q256a */
+#define FLASH_SIZE          (32 * 1024 * 1024)
+
+#define PAGE_SIZE           256
+
+static void spi_conf(uint32_t value)
+{
+    uint32_t conf = readl(AST2400_FMC_BASE + R_CONF);
+
+    conf |= value;
+    writel(AST2400_FMC_BASE + R_CONF, conf);
+}
+
+static void spi_ctrl_start_user(void)
+{
+    uint32_t ctrl = readl(AST2400_FMC_BASE + R_CTRL0);
+
+    ctrl |= CTRL_USERMODE | CTRL_CE_STOP_ACTIVE;
+    writel(AST2400_FMC_BASE + R_CTRL0, ctrl);
+
+    ctrl &= ~CTRL_CE_STOP_ACTIVE;
+    writel(AST2400_FMC_BASE + R_CTRL0, ctrl);
+}
+
+static void spi_ctrl_stop_user(void)
+{
+    uint32_t ctrl = readl(AST2400_FMC_BASE + R_CTRL0);
+
+    ctrl |= CTRL_USERMODE | CTRL_CE_STOP_ACTIVE;
+    writel(AST2400_FMC_BASE + R_CTRL0, ctrl);
+}
+
+static void test_read_jedec(void)
+{
+    uint32_t jedec = 0x0;
+
+    spi_conf(CONF_ENABLE_W0);
+
+    spi_ctrl_start_user();
+    writeb(AST2400_FLASH_BASE, JEDEC_READ);
+    jedec |= readb(AST2400_FLASH_BASE) << 16;
+    jedec |= readb(AST2400_FLASH_BASE) << 8;
+    jedec |= readb(AST2400_FLASH_BASE);
+    spi_ctrl_stop_user();
+
+    g_assert_cmphex(jedec, ==, FLASH_JEDEC);
+}
+
+static void read_page(uint32_t addr, uint32_t *page)
+{
+    int i;
+
+    spi_ctrl_start_user();
+
+    writeb(AST2400_FLASH_BASE, EN_4BYTE_ADDR);
+    writeb(AST2400_FLASH_BASE, READ);
+    writel(AST2400_FLASH_BASE, cpu_to_be32(addr));
+
+    /* Continuous read are supported */
+    for (i = 0; i < PAGE_SIZE / 4; i++) {
+        page[i] = be32_to_cpu(readl(AST2400_FLASH_BASE));
+    }
+    spi_ctrl_stop_user();
+}
+
+static void test_erase_sector(void)
+{
+    uint32_t some_page_addr = 0x600 * PAGE_SIZE;
+    uint32_t page[PAGE_SIZE / 4];
+    int i;
+
+    spi_conf(CONF_ENABLE_W0);
+
+    spi_ctrl_start_user();
+    writeb(AST2400_FLASH_BASE, WREN);
+    writeb(AST2400_FLASH_BASE, EN_4BYTE_ADDR);
+    writeb(AST2400_FLASH_BASE, ERASE_SECTOR);
+    writel(AST2400_FLASH_BASE, cpu_to_be32(some_page_addr));
+    spi_ctrl_stop_user();
+
+    /* Previous page should be full of zeroes as backend is not
+     * initialized */
+    read_page(some_page_addr - PAGE_SIZE, page);
+    for (i = 0; i < PAGE_SIZE / 4; i++) {
+        g_assert_cmphex(page[i], ==, 0x0);
+    }
+
+    /* But this one was erased */
+    read_page(some_page_addr, page);
+    for (i = 0; i < PAGE_SIZE / 4; i++) {
+        g_assert_cmphex(page[i], ==, 0xffffffff);
+    }
+}
+
+static void test_erase_all(void)
+{
+    uint32_t some_page_addr = 0x15000 * PAGE_SIZE;
+    uint32_t page[PAGE_SIZE / 4];
+    int i;
+
+    spi_conf(CONF_ENABLE_W0);
+
+    /* Check some random page. Should be full of zeroes as backend is
+     * not initialized */
+    read_page(some_page_addr, page);
+    for (i = 0; i < PAGE_SIZE / 4; i++) {
+        g_assert_cmphex(page[i], ==, 0x0);
+    }
+
+    spi_ctrl_start_user();
+    writeb(AST2400_FLASH_BASE, WREN);
+    writeb(AST2400_FLASH_BASE, BULK_ERASE);
+    spi_ctrl_stop_user();
+
+    /* Recheck that some random page */
+    read_page(some_page_addr, page);
+    for (i = 0; i < PAGE_SIZE / 4; i++) {
+        g_assert_cmphex(page[i], ==, 0xffffffff);
+    }
+}
+
+static void test_write_page(void)
+{
+    uint32_t my_page_addr = 0x14000 * PAGE_SIZE; /* beyond 16MB */
+    uint32_t some_page_addr = 0x15000 * PAGE_SIZE;
+    uint32_t page[PAGE_SIZE / 4];
+    int i;
+
+    spi_conf(CONF_ENABLE_W0);
+
+    spi_ctrl_start_user();
+    writeb(AST2400_FLASH_BASE, EN_4BYTE_ADDR);
+    writeb(AST2400_FLASH_BASE, PP);
+    writel(AST2400_FLASH_BASE, cpu_to_be32(my_page_addr));
+
+    /* Fill the page with its own addresses */
+    for (i = 0; i < PAGE_SIZE / 4; i++) {
+        writel(AST2400_FLASH_BASE, cpu_to_be32(my_page_addr + i * 4));
+    }
+    spi_ctrl_stop_user();
+
+    /* Check what was written */
+    read_page(my_page_addr, page);
+    for (i = 0; i < PAGE_SIZE / 4; i++) {
+        g_assert_cmphex(page[i], ==, my_page_addr + i * 4);
+    }
+
+    /* Check some other page. It should be full of 0xff */
+    read_page(some_page_addr, page);
+    for (i = 0; i < PAGE_SIZE / 4; i++) {
+        g_assert_cmphex(page[i], ==, 0xffffffff);
+    }
+}
+
+static char tmp_path[] = "/tmp/qtest.m25p80.XXXXXX";
+
+int main(int argc, char **argv)
+{
+    int ret;
+    int fd;
+    char *args;
+
+    g_test_init(&argc, &argv, NULL);
+
+    fd = mkstemp(tmp_path);
+    g_assert(fd >= 0);
+    ret = ftruncate(fd, FLASH_SIZE);
+    g_assert(ret == 0);
+    close(fd);
+
+    args = g_strdup_printf("-m 256 -machine palmetto-bmc "
+                           "-drive file=%s,format=raw,if=mtd",
+                           tmp_path);
+    qtest_start(args);
+
+    qtest_add_func("/m25p80/read_jedec", test_read_jedec);
+    qtest_add_func("/m25p80/erase_sector", test_erase_sector);
+    qtest_add_func("/m25p80/erase_all",  test_erase_all);
+    qtest_add_func("/m25p80/write_page", test_write_page);
+
+    ret = g_test_run();
+
+    qtest_quit(global_qtest);
+    unlink(tmp_path);
+    g_free(args);
+    return ret;
+}
-- 
2.1.4




reply via email to

[Prev in Thread] Current Thread [Next in Thread]