[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-arm] [PATCH 6/7] ast2400: use contents of first SPI flash as a rom
From: |
Cédric Le Goater |
Subject: |
[Qemu-arm] [PATCH 6/7] ast2400: use contents of first SPI flash as a rom |
Date: |
Mon, 4 Jul 2016 14:18:57 +0200 |
This provides support for U-Boot images which are loaded at 0x0.
A Palmetto BMC guest can now be simply booted with :
$ qemu-system-arm -m 256 -M palmetto-bmc -nographic -nodefaults \
-mtdblock ./flash-palmetto-20160512040959 \
-mtdblock ./palmetto.pnor
The first block device uses the file './flash-palmetto-20160512040959'
which will act as a SPI flash module for the BMC, handled by the
SMC/FMC controller. The second block device uses the file
'./palmetto.pnor' which is an OpenPower firmware image for a palmetto
OpenPower system. This one will be handled by the SMC/SPI controller.
The flash images can be grabbed here :
https://openpower.xyz/job/openbmc-build/distro=ubuntu,target=palmetto/lastSuccessfulBuild/artifact/images/palmetto/flash-palmetto
https://openpower.xyz/job/openpower-op-build/distro=ubuntu,target=palmetto/lastSuccessfulBuild/artifact/images/palmetto.pnor
We could add a second BMC SPI flash by changing the 'num-cs' property
of the controller and emulate a golden image flash module.
Signed-off-by: Cédric Le Goater <address@hidden>
---
hw/arm/palmetto-bmc.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/hw/arm/palmetto-bmc.c b/hw/arm/palmetto-bmc.c
index b00757dcbc69..fcbb4f197162 100644
--- a/hw/arm/palmetto-bmc.c
+++ b/hw/arm/palmetto-bmc.c
@@ -33,6 +33,8 @@ typedef struct PalmettoBMCState {
MemoryRegion ram;
} PalmettoBMCState;
+static bool palmetto_bmc_has_flash0;
+
static void palmetto_bmc_init_flashes(AspeedSMCState *s, const char *flashtype,
Error **errp)
{
@@ -51,6 +53,7 @@ static void palmetto_bmc_init_flashes(AspeedSMCState *s,
const char *flashtype,
if (dinfo) {
qdev_prop_set_drive(fl->flash, "drive", blk_by_legacy_dinfo(dinfo),
errp);
+ palmetto_bmc_has_flash0 = true;
}
m25p80_set_rom_storage(fl->flash, &fl->mmio);
qdev_init_nofail(fl->flash);
@@ -82,6 +85,21 @@ static void palmetto_bmc_init(MachineState *machine)
palmetto_bmc_init_flashes(&bmc->soc.smc, "n25q256a", &error_abort);
palmetto_bmc_init_flashes(&bmc->soc.spi, "mx25l25635f", &error_abort);
+ /*
+ * Install first SMC/FMC flash content as a rom.
+ */
+ if (palmetto_bmc_has_flash0) {
+ AspeedSMCFlash *flash0 = &bmc->soc.smc.flashes[0];
+ MemoryRegion *flash0alias = g_new(MemoryRegion, 1);
+
+ memory_region_init_alias(flash0alias, OBJECT(&bmc->soc.smc),
+ "flash0alias", &flash0->mmio, 0,
+ flash0->size);
+
+ memory_region_add_subregion(get_system_memory(), 0, flash0alias);
+ palmetto_bmc_binfo.firmware_loaded = true;
+ }
+
palmetto_bmc_binfo.kernel_filename = machine->kernel_filename;
palmetto_bmc_binfo.initrd_filename = machine->initrd_filename;
palmetto_bmc_binfo.kernel_cmdline = machine->kernel_cmdline;
--
2.1.4
- [Qemu-arm] [PATCH 3/7] ast2400: use a mx25l25635f chip, (continued)
[Qemu-arm] [PATCH 5/7] ast2400: handle SPI flash Command mode (read only), Cédric Le Goater, 2016/07/04
[Qemu-arm] [PATCH 6/7] ast2400: use contents of first SPI flash as a rom,
Cédric Le Goater <=
[Qemu-arm] [PATCH 7/7] ast2400: add a memory controller device model, Cédric Le Goater, 2016/07/04