Re: [Qemu-arm] usb keyboard and mouse can't work on QEMU ARM64 with KVM

[Shannon Zhao]

On 2016/7/26 16:07, Ard Biesheuvel wrote:
> On 26 July 2016 at 09:34, Shannon Zhao <address@hidden> wrote:
>> > Hi，
>> >
>> > Recently I'm trying to use usb keyboard and mouse with QEMU on ARM64. 
>> > Below is my QEMU command line,
>> > host and guest kernel both are 4.7.0-rc7+, and I ran it on Hikey board.
>> >
>> >     qemu-system-aarch64 \
>> >     -smp 1 -cpu host -enable-kvm \
>> >     -m 256 -M virt \
>> >     -k en-us \
>> >     -nographic \
>> >     -device usb-ehci -device usb-kbd -device usb-mouse -usb\
>> >     -kernel Image \
>> >     -initrd guestfs.cpio.gz \
>> >     -append "rdinit=/sbin/init console=ttyAMA0 root=/dev/ram 
>> > earlycon=pl011,0x9000000 rw"
>> >
>> > The following guest log shows that usb controller can be probed but the 
>> > keyboard and mouse can't be
>> > found.
>> >
>> > [    1.597433] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>> > [    1.599562] ehci-pci: EHCI PCI platform driver
>> > [    1.608082] ehci-pci 0000:00:03.0: EHCI Host Controller
>> > [    1.609485] ehci-pci 0000:00:03.0: new USB bus registered, assigned bus 
>> > number 1
>> > [    1.611833] ehci-pci 0000:00:03.0: irq 49, io mem 0x10041000
>> > [    1.623599] ehci-pci 0000:00:03.0: USB 2.0 started, EHCI 1.00
>> > [    1.625867] hub 1-0:1.0: USB hub found
>> > [    1.626906] hub 1-0:1.0: 6 ports detected
>> > [    1.628685] ehci-platform: EHCI generic platform driver
>> > [    1.630263] ehci-msm: Qualcomm On-Chip EHCI Host Controller
>> > [    1.631947] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>> > [    1.633547] ohci-pci: OHCI PCI platform driver
>> > [    1.634807] ohci-platform: OHCI generic platform driver
>> > [...]
>> > [    1.939001] usb 1-1: new high-speed USB device number 2 using ehci-pci
>> > [   17.467040] usb 1-1: device not accepting address 2, error -110
>> > [   17.579165] usb 1-1: new high-speed USB device number 3 using ehci-pci
>> > [   32.287242] random: dd urandom read with 7 bits of entropy available
>> > [   33.110970] usb 1-1: device not accepting address 3, error -110
>> > [   33.223030] usb 1-1: new high-speed USB device number 4 using ehci-pci
>> > [   43.635185] usb 1-1: device not accepting address 4, error -110
>> > [   43.747033] usb 1-1: new high-speed USB device number 5 using ehci-pci
>> > [   54.159043] usb 1-1: device not accepting address 5, error -110
>> > [   54.160752] usb usb1-port1: unable to enumerate USB device
>> > [   54.307290] usb 1-2: new high-speed USB device number 6 using ehci-pci
>> > [   69.839052] usb 1-2: device not accepting address 6, error -110
>> > [   69.951249] usb 1-2: new high-speed USB device number 7 using ehci-pci
>> > [   85.483171] usb 1-2: device not accepting address 7, error -110
>> > [   85.595035] usb 1-2: new high-speed USB device number 8 using ehci-pci
>> > [   90.619247] usb 1-2: device descriptor read/8, error -110
>> > [   95.743482] usb 1-2: device descriptor read/8, error -110
>> > [   95.959165] usb 1-2: new high-speed USB device number 9 using ehci-pci
>> > [  106.371177] usb 1-2: device not accepting address 9, error -110
>> > [  106.372894] usb usb1-port2: unable to enumerate USB device
>> >
>> > lsusb shows:
>> > address@hidden:~# lsusb
>> > Bus 001 Device 001: ID 1d6b:0002
>> >
>> > Besides, I have also tried QEMU TCG without KVM. The guest can 
>> > successfully probe usb controller,
>> > keyboard and mouse.
>> > lsusb shows:
>> > address@hidden:~# lsusb
>> > Bus 001 Device 002: ID 0627:0001
>> > Bus 001 Device 003: ID 0627:0001
>> > Bus 001 Device 001: ID 1d6b:0002
>> >
>> > So it looks like that usb keyboard and mouse don't work with KVM on QEMU 
>> > ARM64 while they can work
>> > with TCG. IIUC, all the usb devices are emulated by QEMU, it has nothing 
>> > with KVM. So it really
>> > confused me and I'm not familiar with usb devices. Also I have seen 
>> > someone else reports this issue
>> > before[1].
>> >
>> > [1]https://lists.gnu.org/archive/html/qemu-arm/2016-06/msg00110.html
>> >
>> > Any comments and help are welcome. Thanks in advance.
>> >
> Does your QEMU have this patch?
> http://git.qemu.org/?p=qemu.git;a=commitdiff;h=5d636e21c44ecf982a22a7bc4ca89186079ac283

Great! I applied this patch and the keyboard and mouse can work with KVM
now. Thanks a lot, Ard.

Thanks,
-- 
Shannon