qemu-arm
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-arm] [Qemu devel v5 PATCH 5/5] msf2: Add Emcraft's Smartfusion


From: sundeep subbaraya
Subject: Re: [Qemu-arm] [Qemu devel v5 PATCH 5/5] msf2: Add Emcraft's Smartfusion2 SOM kit.
Date: Mon, 29 May 2017 10:56:42 +0530

Hi Alistair,

On Sat, May 27, 2017 at 5:30 AM, Alistair Francis <address@hidden> wrote:
On Tue, May 16, 2017 at 8:38 AM, Subbaraya Sundeep
<address@hidden> wrote:
> Emulated Emcraft's Smartfusion2 System On Module starter
> kit.
>
> Signed-off-by: Subbaraya Sundeep <address@hidden>
> ---
>  hw/arm/Makefile.objs |  1 +
>  hw/arm/msf2-som.c    | 89 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 90 insertions(+)
>  create mode 100644 hw/arm/msf2-som.c
>
> diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
> index c828061..4b02093 100644
> --- a/hw/arm/Makefile.objs
> +++ b/hw/arm/Makefile.objs
> @@ -5,6 +5,7 @@ obj-y += omap_sx1.o palm.o realview.o spitz.o stellaris.o
>  obj-y += tosa.o versatilepb.o vexpress.o virt.o xilinx_zynq.o z2.o
>  obj-$(CONFIG_ACPI) += virt-acpi-build.o
>  obj-y += netduino2.o
> +obj-y += msf2-som.o

This should be obj-$(CONFIG_MSF2).

Ok will change it. 

>  obj-y += sysbus-fdt.o
>
>  obj-y += armv7m.o exynos4210.o pxa2xx.o pxa2xx_gpio.o pxa2xx_pic.o
> diff --git a/hw/arm/msf2-som.c b/hw/arm/msf2-som.c
> new file mode 100644
> index 0000000..cd2b759
> --- /dev/null
> +++ b/hw/arm/msf2-som.c
> @@ -0,0 +1,89 @@
> +/*
> + * SmartFusion2 SOM starter kit(from Emcraft) emulation.
> + *
> + * Copyright (c) 2017 Subbaraya Sundeep <address@hidden>
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a copy
> + * of this software and associated documentation files (the "Software"), to deal
> + * in the Software without restriction, including without limitation the rights
> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> + * copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> + * THE SOFTWARE.
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qapi/error.h"
> +#include "hw/boards.h"
> +#include "hw/arm/msf2-soc.h"
> +#include "hw/arm/arm.h"
> +#include "exec/address-spaces.h"
> +
> +#define DDR_BASE_ADDRESS      0xA0000000
> +#define DDR_SIZE              (64 * M_BYTE)
> +
> +static void emcraft_sf2_init(MachineState *machine)
> +{
> +    DeviceState *dev;
> +    DeviceState *spi_flash;
> +    MSF2State *soc;
> +    DriveInfo *dinfo = drive_get_next(IF_MTD);
> +    qemu_irq cs_line;
> +    SSIBus *spi_bus;
> +    MemoryRegion *sysmem = get_system_memory();
> +    MemoryRegion *ddr = g_new(MemoryRegion, 1);
> +
> +    memory_region_init_ram(ddr, NULL, "ddr-ram", DDR_SIZE,
> +                           &error_fatal);
> +    vmstate_register_ram_global(ddr);
> +    memory_region_add_subregion(sysmem, DDR_BASE_ADDRESS, ddr);

The user can use -m to specify the amount of RAM to create in the
machine. Unless this board only ever includes 64MB of RAM you should
use that option (you will need to sanity check it though). If the
board only ever has 64MB it might be worth printing a warning to the
user if they specify an something. Although there might be a default
if they don't use -m, which makes it hard to print out a warning
message.

This -m confuses me. Why is it necessary for an embedded board? RAM chip
is fixed and not extendable. Whereas normal PC may have extra RAM slots.
If another board has more RAM then we would instantiate another machine for it 
with that RAM size. Please explain. Maybe I am thinking in wrong direction.

Thanks,
Sundeep

> +
> +    dev = qdev_create(NULL, TYPE_MSF2_SOC);
> +    qdev_prop_set_string(dev, "part-name", "M2S010");
> +    qdev_prop_set_uint64(dev, "eNVM-size", M2S010_ENVM_SIZE);
> +    qdev_prop_set_uint64(dev, "eSRAM-size", M2S010_ESRAM_SIZE);
> +
> +    /*
> +     * pclk0 and pclk1 are configurable in Libero.
> +     * Emcraft's SoM kit comes with these settings by default.
> +     */
> +    qdev_prop_set_uint32(dev, "pclk0", 71 * 1000000);
> +    qdev_prop_set_uint32(dev, "pclk1", 71 * 1000000);
> +
> +    object_property_set_bool(OBJECT(dev), true, "realized", &error_fatal);
> +
> +    soc = MSF2_SOC(dev);
> +
> +    /* Attach SPI flash to SPI0 controller */
> +    spi_bus = (SSIBus *)qdev_get_child_bus(dev, "spi0");
> +    spi_flash = ssi_create_slave_no_init(spi_bus, "s25sl12801");
> +    qdev_prop_set_uint8(spi_flash, "spansion-cr2nv", 1);
> +    if (dinfo) {
> +        qdev_prop_set_drive(spi_flash, "drive", blk_by_legacy_dinfo(dinfo),
> +                                    &error_fatal);
> +    }
> +    qdev_init_nofail(spi_flash);

Can you just set realized instead?

Ok I will check and change.

Thanks,
Sundeep
 

Thanks,
Alistair

> +    cs_line = qdev_get_gpio_in_named(spi_flash, SSI_GPIO_CS, 0);
> +    sysbus_connect_irq(SYS_BUS_DEVICE(&soc->spi[0]), 1, cs_line);
> +
> +    armv7m_load_kernel(ARM_CPU(first_cpu), machine->kernel_filename,
> +                       soc->envm_size);
> +}
> +
> +static void emcraft_sf2_machine_init(MachineClass *mc)
> +{
> +    mc->desc = "SmartFusion2 SOM kit from Emcraft";
> +    mc->init = emcraft_sf2_init;
> +}
> +
> +DEFINE_MACHINE("smartfusion2-som", emcraft_sf2_machine_init)
> --
> 2.5.0
>


reply via email to

[Prev in Thread] Current Thread [Next in Thread]