|
| From: | sundeep subbaraya |
| Subject: | Re: [Qemu-arm] [Qemu devel v5 PATCH 0/5] Add support for Smartfusion2 SoC |
| Date: | Fri, 9 Jun 2017 12:51:26 +0530 |
Hi Sundeep,
On 05/29/2017 02:28 AM, sundeep subbaraya wrote:
Hi Philippe,
Any update on this? I will wait for your comments too
and send next iteration fixing Alistair comments.
Sorry I'm supposed to be in holidays ;)
Thanks,
Sundeep
On Wed, May 17, 2017 at 3:09 PM, sundeep subbaraya
<address@hidden <mailto:address@hidden>> wrote:
Hi Philippe,
On Wed, May 17, 2017 at 9:57 AM, Philippe Mathieu-Daudé<address@hidden <mailto:address@hidden>> wrote:
Hi Sundeep,
This patchset is way cleaner!
I had a fast look and I like it, I'll try to make some time soon
to review details and test it.
Thank you
Is your work interested on U-Boot or more focused in Linux kernel?
I am interested more in kernel. I had to look into u-boot for first
time for Qemu only.
I worked only on FPGAs(load kernel with debugger) till now so never
got a chance to look into u-boot.
If you compile QEMU with libfdt support you can use the -dtb
option to pass the blob to the kernel directly, bypassing the
bootloader.
Yeah for armv7m I could not find any thing like that in tree.
If you need a bootloader you may give a look at coreboot which
supports dts well, see how Vladimir Serbinenko used Linux's dt
to boot a QEMU Versatile Express board:
https://mail.coreboot.org/pipermail/coreboot-gerrit/2016- February/040899.html
<https://mail.coreboot.org/pipermail/coreboot-gerrit/2016- >February/040899.html
Cool. I will look into it.
Thanks,
Sundeep
Regards,
Phil.
On 05/16/2017 12:38 PM, Subbaraya Sundeep wrote:
Hi Qemu-devel,
I am trying to add Smartfusion2 SoC.
SoC is from Microsemi and System on Module(SOM)
board is from Emcraft systems. Smartfusion2 has hardened
Microcontroller(Cortex-M3)based Sub System and FPGA fabric.
At the moment only system timer, sysreg and SPI
controller are modelled.
Testing:
./arm-softmmu/qemu-system-arm -M smartfusion2-som -serial
mon:stdio \
-kernel u-boot.bin -display none -drive
file=spi.bin,if=mtd,format=raw
I'm not sure the timer is working correctly, U-Boot loops with this pattern:
msf2_sysreg_read: addr: 0x00000048 data: 0x00000220
msf2_sysreg_write: addr: 0x00000048 data: 0x00000220
msf2_sysreg_read: addr: 0x00000048 data: 0x00000220
msf2_sysreg_write: addr: 0x00000048 data: 0x00000020
msf2_sysreg_read: addr: 0x00000048 data: 0x00000020
msf2_sysreg_write: addr: 0x00000048 data: 0x00000000
msf2_sysreg_read: addr: 0x00000048 data: 0x00000000
msf2_sysreg_write: addr: 0x00000048 data: 0x00000020
msf2_sysreg_read: addr: 0x00000048 data: 0x00000020
msf2_sysreg_write: addr: 0x00000048 data: 0x00000220
Binaries u-boot.bin and spi.bin are at:
you can compress spi.bin!
can you share u-boot.elf with debug symbols too?
Regards,
Phil.
https://github.com/Subbaraya-Sundeep/qemu-test-binaries.git
<https://github.com/Subbaraya-Sundeep/qemu-test-binaries.git >
U-boot is from Emcraft with modified
- SPI driver not to use PDMA.
- ugly hack to pass dtb to kernel in r1.
@
https://github.com/Subbaraya-Sundeep/emcraft-uboot-sf2.git
<https://github.com/Subbaraya-Sundeep/emcraft-uboot-sf2.git >
Linux is 4.5 linux with Smartfusion2 SoC dts and clocksource
driver added by myself @
https://github.com/Subbaraya-Sundeep/linux.git
<https://github.com/Subbaraya-Sundeep/linux.git >
v5
As per Philippe comments:
Added abort in Sysreg if guest tries to remap memory
other than default mapping.
Use of CONFIG_MSF2 in Makefile for soc.c
Fixed incorrect logic in timer model.
Renamed msf2-timer.c -> mss-timer.c
msf2-spi.c -> mss-spi.c also type names
Renamed function msf2_init->emcraft_sf2_init in
msf2-som.c
Added part-name,eNVM-size,eSRAM-size,pclk0 and pclk1
properties to soc.
Pass soc part-name,memory size and clock rate
properties from som.
v4:
Fixed build failure by using PRIx macros.
v3:
Added SoC file and board file as per Alistair comments.
v2:
Added SPI controller so that u-boot loads kernel from
spi flash.
v1:
Initial patch set with timer and sysreg
Thanks,
Sundeep
Subbaraya Sundeep (5):
msf2: Add Smartfusion2 System timer
msf2: Microsemi Smartfusion2 System Register block.
msf2: Add Smartfusion2 SPI controller
msf2: Add Smartfusion2 SoC.
msf2: Add Emcraft's Smartfusion2 SOM kit.
default-configs/arm-softmmu.mak | 1 +
hw/arm/Makefile.objs | 2 +
hw/arm/msf2-soc.c | 201 +++++++++++++++++++++
hw/arm/msf2-som.c | 89 ++++++++++
hw/misc/Makefile.objs | 1 +
hw/misc/msf2-sysreg.c | 161 +++++++++++++++++
hw/ssi/Makefile.objs | 1 +
hw/ssi/mss-spi.c | 378
++++++++++++++++++++++++++++++++++++++++
hw/timer/Makefile.objs | 1 +
hw/timer/mss-timer.c | 249
++++++++++++++++++++++++++
include/hw/arm/msf2-soc.h | 69 ++++++++
include/hw/misc/msf2-sysreg.h | 80 +++++++++
include/hw/ssi/mss-spi.h | 104 +++++++++++
include/hw/timer/mss-timer.h | 80 +++++++++
14 files changed, 1417 insertions(+)
create mode 100644 hw/arm/msf2-soc.c
create mode 100644 hw/arm/msf2-som.c
create mode 100644 hw/misc/msf2-sysreg.c
create mode 100644 hw/ssi/mss-spi.c
create mode 100644 hw/timer/mss-timer.c
create mode 100644 include/hw/arm/msf2-soc.h
create mode 100644 include/hw/misc/msf2-sysreg.h
create mode 100644 include/hw/ssi/mss-spi.h
create mode 100644 include/hw/timer/mss-timer.h
| [Prev in Thread] | Current Thread | [Next in Thread] |