Re: [Qemu-arm] [PULL 22/24] target-arm: ensure all cross vCPUs TLB flushes complete

[Alex Bennée]

Dmitry Osipenko <address@hidden> writes:

> On 17.09.2017 16:22, Alex Bennée wrote:
>>
>> Dmitry Osipenko <address@hidden> writes:
>>
>>> On 24.02.2017 14:21, Alex Bennée wrote:
>>>> Previously flushes on other vCPUs would only get serviced when they
>>>> exited their TranslationBlocks. While this isn't overly problematic it
>>>> violates the semantics of TLB flush from the point of view of source
>>>> vCPU.
>>>>
>>>> To solve this we call the cputlb *_all_cpus_synced() functions to do
>>>> the flushes which ensures all flushes are completed by the time the
>>>> vCPU next schedules its own work. As the TLB instructions are modelled
>>>> as CP writes the TB ends at this point meaning cpu->exit_request will
>>>> be checked before the next instruction is executed.
>>>>
>>>> Deferring the work until the architectural sync point is a possible
>>>> future optimisation.
>>>>
>>>> Signed-off-by: Alex Bennée <address@hidden>
>>>> Reviewed-by: Richard Henderson <address@hidden>
>>>> Reviewed-by: Peter Maydell <address@hidden>
>>>> ---
>>>>  target/arm/helper.c | 165 
>>>> ++++++++++++++++++++++------------------------------
>>>>  1 file changed, 69 insertions(+), 96 deletions(-)
>>>>
>>>
>>> Hello,
>>>
>>> I have an issue with Linux kernel stopping to boot on a SMP 32bit ARM 
>>> (haven't
>>> checked 64bit) in a single-threaded TCG mode. Kernel reaches point where it
>>> should mount rootfs over NFS and vCPUs stop. This issue is reproducible 
>>> with any
>>> 32bit ARM machine type. Kernel boots fine with a MTTCG accel, only
>>> single-threaded TCG is affected. Git bisection lead to this patch, any
>>> ideas?
>>
>> It shouldn't cause a problem but can you obtain a backtrace of the
>> system when hung?
>>
>
> Actually, it looks like TCG enters infinite loop. Do you mean backtrace of 
> QEMU
> by 'backtrace of the system'? If so, here it is:
>
> Thread 4 (Thread 0x7ffa37f10700 (LWP 20716)):
>
> #0  0x00007ffa601888bd in poll () at ../sysdeps/unix/syscall-template.S:84
>
> #1  0x00007ffa5e3aa561 in poll (__timeout=-1, __nfds=2, __fds=0x7ffa30006dc0) 
> at
> /usr/include/bits/poll2.h:46
> #2  poll_func (ufds=0x7ffa30006dc0, nfds=2, timeout=-1, 
> userdata=0x557bd603eae0)
> at
> /var/tmp/portage/media-sound/pulseaudio-10.0/work/pulseaudio-10.0/src/pulse/thread-mainloop.c:69
> #3  0x00007ffa5e39bbb1 in pa_mainloop_poll (address@hidden) at
> /var/tmp/portage/media-sound/pulseaudio-10.0/work/pulseaudio-10.0/src/pulse/mainloop.c:844
> #4  0x00007ffa5e39c24e in pa_mainloop_iterate (m=0x557bd60401f0,
> block=<optimized out>, retval=0x0) at
> /var/tmp/portage/media-sound/pulseaudio-10.0/work/pulseaudio-10.0/src/pulse/mainloop.c:926
> #5  0x00007ffa5e39c300 in pa_mainloop_run (m=0x557bd60401f0,
> address@hidden) at
> /var/tmp/portage/media-sound/pulseaudio-10.0/work/pulseaudio-10.0/src/pulse/mainloop.c:944
>
> #6  0x00007ffa5e3aa4a9 in thread (userdata=0x557bd60400f0) at
> /var/tmp/portage/media-sound/pulseaudio-10.0/work/pulseaudio-10.0/src/pulse/thread-mainloop.c:100
>
> #7  0x00007ffa599eea38 in internal_thread_func (userdata=0x557bd603e090) at
> /var/tmp/portage/media-sound/pulseaudio-10.0/work/pulseaudio-10.0/src/pulsecore/thread-posix.c:81
>
> #8  0x00007ffa60453657 in start_thread (arg=0x7ffa37f10700) at
> pthread_create.c:456
>
> #9  0x00007ffa60193c5f in clone () at
> ../sysdeps/unix/sysv/linux/x86_64/clone.S:97
>
>
>
>
>
> Thread 3 (Thread 0x7ffa4adff700 (LWP 20715)):
>
>
> #0  0x00007ffa53e51caf in code_gen_buffer ()
>

Well it's not locked up in servicing any flush tasks as it's executing
code. Maybe the guest code is spinning on something?

In the monitor:

  info registers

Will show you where things are, see if the ip is moving each time. Also
you can do a disassemble dump from there to see what code it is stuck
on.

>
> #1  0x0000557bd2fa7f17 in cpu_tb_exec (cpu=0x557bd56160a0, itb=0x7ffa53e51b80
> <code_gen_buffer+15481686>) at 
> /home/dima/vl/qemu-tests/accel/tcg/cpu-exec.c:166
>
> #2  0x0000557bd2fa8e0f in cpu_loop_exec_tb (cpu=0x557bd56160a0,
> tb=0x7ffa53e51b80 <code_gen_buffer+15481686>, last_tb=0x7ffa4adfea68,
> tb_exit=0x7ffa4adfea64) at /home/dima/vl/qemu-tests/accel/tcg/cpu-exec.c:613
> #3  0x0000557bd2fa90ff in cpu_exec (cpu=0x557bd56160a0) at
> /home/dima/vl/qemu-tests/accel/tcg/cpu-exec.c:711
>
> #4  0x0000557bd2f6dcba in tcg_cpu_exec (cpu=0x557bd56160a0) at
> /home/dima/vl/qemu-tests/cpus.c:1270
>
> #5  0x0000557bd2f6dee1 in qemu_tcg_rr_cpu_thread_fn (arg=0x557bd5598e20) at
> /home/dima/vl/qemu-tests/cpus.c:1365
>
> #6  0x00007ffa60453657 in start_thread (arg=0x7ffa4adff700) at
> pthread_create.c:456
>
> #7  0x00007ffa60193c5f in clone () at
> ../sysdeps/unix/sysv/linux/x86_64/clone.S:97
>
>
>
>
>
>
>
> Thread 2 (Thread 0x7ffa561bf700 (LWP 20714)):
>
>
>
> #0  syscall () at ../sysdeps/unix/sysv/linux/x86_64/syscall.S:38
>
>
>
> #1  0x0000557bd34e1eaa in qemu_futex_wait (f=0x557bd4031798
> <rcu_call_ready_event>, val=4294967295) at
> /home/dima/vl/qemu-tests/include/qemu/futex.h:26
>
>
> #2  0x0000557bd34e2071 in qemu_event_wait (ev=0x557bd4031798
> <rcu_call_ready_event>) at util/qemu-thread-posix.c:442
>
>
> #3  0x0000557bd34f9b1f in call_rcu_thread (opaque=0x0) at util/rcu.c:249
>
>
>
> #4  0x00007ffa60453657 in start_thread (arg=0x7ffa561bf700) at
> pthread_create.c:456
>
>
> #5  0x00007ffa60193c5f in clone () at
> ../sysdeps/unix/sysv/linux/x86_64/clone.S:97
>
>
>
>
>
>
>
> Thread 1 (Thread 0x7ffa67502600 (LWP 20713)):
>
>
>
> #0  0x00007ffa601889ab in __GI_ppoll (fds=0x557bd5bbf160, nfds=11,
> timeout=<optimized out>, sigmask=0x0) at ../sysdeps/unix/sysv/linux/ppoll.c:39
>
>
> #1  0x0000557bd34dc460 in qemu_poll_ns (fds=0x557bd5bbf160, nfds=11,
> timeout=29841115) at util/qemu-timer.c:334
>
>
> #2  0x0000557bd34dd488 in os_host_main_loop_wait (timeout=29841115) at
> util/main-loop.c:255
>
>
> #3  0x0000557bd34dd557 in main_loop_wait (nonblocking=0) at 
> util/main-loop.c:515
>
>
>
> #4  0x0000557bd3120f0e in main_loop () at vl.c:1999
>
>
>
> #5  0x0000557bd3128d4a in main (argc=17, argv=0x7ffe7de2a248,
> envp=0x7ffe7de2a2d8) at vl.c:4877
>
>>>
>>> Example:
>>>
>>> qemu-system-arm -M vexpress-a9 -smp cpus=2 -accel accel=tcg,thread=single
>>> -kernel arch/arm/boot/zImage -dtb arch/arm/boot/dts/vexpress-v2p-ca9.dtb 
>>> -serial
>>> stdio -net nic,model=lan9118 -net user -d in_asm,out_asm -D /tmp/qemulog
>>>
>>> Last TB from the log:
>>> ----------------
>>> IN:
>>> 0xc011a450:  ee080f73      mcr      15, 0, r0, cr8, cr3, {3}
>>>
>>> OUT: [size=68]
>>> 0x7f32d8b93f80:  mov    -0x18(%r14),%ebp
>>> 0x7f32d8b93f84:  test   %ebp,%ebp
>>> 0x7f32d8b93f86:  jne    0x7f32d8b93fb8
>>> 0x7f32d8b93f8c:  mov    %r14,%rdi
>>> 0x7f32d8b93f8f:  mov    $0x5620f2aea5d0,%rsi
>>> 0x7f32d8b93f99:  mov    (%r14),%edx
>>> 0x7f32d8b93f9c:  mov    $0x5620f18107ca,%r10
>>> 0x7f32d8b93fa6:  callq  *%r10
>>> 0x7f32d8b93fa9:  movl   $0xc011a454,0x3c(%r14)
>>> 0x7f32d8b93fb1:  xor    %eax,%eax
>>> 0x7f32d8b93fb3:  jmpq   0x7f32d7a4e016
>>> 0x7f32d8b93fb8:  lea    -0x14aa07c(%rip),%rax        # 0x7f32d76e9f43
>>> 0x7f32d8b93fbf:  jmpq   0x7f32d7a4e016


--
Alex Bennée