|
| From: | sundeep subbaraya |
| Subject: | Re: [Qemu-arm] [Qemu devel v9 PATCH 2/5] msf2: Microsemi Smartfusion2 System Register block |
| Date: | Mon, 18 Sep 2017 18:57:02 +0530 |
Hi Philippe,On Mon, Sep 18, 2017 at 6:31 AM, Philippe Mathieu-Daudé <address@hidden> wrote:Hi Sundeep, Peter,eh?
On 09/15/2017 01:59 PM, Subbaraya Sundeep wrote:
Added Sytem register block of Smartfusion2.
This block has PLL registers which are accessed by guest.
Signed-off-by: Subbaraya Sundeep <address@hidden>
Reviewed-by: Alistair Francis <address@hidden>
---
hw/misc/Makefile.objs | 1 +
hw/misc/msf2-sysreg.c | 168 ++++++++++++++++++++++++++++++++++++++++++
hw/misc/trace-events | 5 ++
include/hw/misc/msf2-sysreg.h | 77 +++++++++++++++++++
4 files changed, 251 insertions(+)
create mode 100644 hw/misc/msf2-sysreg.c
create mode 100644 include/hw/misc/msf2-sysreg.h
diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs
index 29fb922..e8f0a02 100644
--- a/hw/misc/Makefile.objs
+++ b/hw/misc/Makefile.objs
@@ -59,3 +59,4 @@ obj-$(CONFIG_HYPERV_TESTDEV) += hyperv_testdev.o
obj-$(CONFIG_AUX) += auxbus.o
obj-$(CONFIG_ASPEED_SOC) += aspeed_scu.o aspeed_sdmc.o
obj-y += mmio_interface.o
+obj-$(CONFIG_MSF2) += msf2-sysreg.o
diff --git a/hw/misc/msf2-sysreg.c b/hw/misc/msf2-sysreg.c
new file mode 100644
index 0000000..dc3597b
--- /dev/null
+++ b/hw/misc/msf2-sysreg.c
@@ -0,0 +1,168 @@
+/*
+ * System Register block model of Microsemi SmartFusion2.
+ *
+ * Copyright (c) 2017 Subbaraya Sundeep <address@hidden>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "hw/misc/msf2-sysreg.h"
+#include "trace.h"
+
+static inline int msf2_divbits(uint32_t div)
+{
+ int ret = 0;
+
+ switch (div) {
+ case 1:
+ ret = 0;
+ break;
+ case 2:
+ ret = 1;
+ break;
+ case 4:
+ ret = 2;
+ break;
+ case 8:
+ ret = 4;
+ break;
+ case 16:
+ ret = 5;
+ break;
+ case 32:
+ ret = 6;
+ break;
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+static void msf2_sysreg_reset(DeviceState *d)
+{
+ MSF2SysregState *s = MSF2_SYSREG(d);
+
+ s->regs[MSSDDR_PLL_STATUS_LOW_CR] = 0x021A2358;
+ s->regs[MSSDDR_PLL_STATUS] = 0x3;
+ s->regs[MSSDDR_FACC1_CR] = msf2_divbits(s->apb0div) << 5 |
ctz32(s->apb0div) << 5 ...I will modify like below:div0 = s->apb0div < 8 ? ctz32(s->apb0div) : ctz32(s->apb0div) + 1;div1 = s->apb1div < 8 ? ctz32(s->apb1div) : ctz32(s->apb1div) + 1;s->regs[MSSDDR_FACC1_CR] = div0 << 5 | div1 << 2;I'd rather exit here than continue with inconsistent cpu, Peter what do you recommend?
+ msf2_divbits(s->apb1div) << 2;
+}
+
+static uint64_t msf2_sysreg_read(void *opaque, hwaddr offset,
+ unsigned size)
+{
+ MSF2SysregState *s = opaque;
+ uint32_t ret = 0;
+
+ offset >>= 2;
+ if (offset < ARRAY_SIZE(s->regs)) {
+ ret = s->regs[offset];
+ trace_msf2_sysreg_read(offset << 2, ret);
+ } else {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Bad offset 0x%08" HWADDR_PRIx "\n", __func__,
+ offset << 2);
+ }
+
+ return ret;
+}
+
+static void msf2_sysreg_write(void *opaque, hwaddr offset,
+ uint64_t val, unsigned size)
+{
+ MSF2SysregState *s = opaque;
+ uint32_t newval = val;
+
+ offset >>= 2;
+
+ switch (offset) {
+ case MSSDDR_PLL_STATUS:
+ trace_msf2_sysreg_write_pll_status();
+ break;
+
+ case ESRAM_CR:
+ case DDR_CR:
+ case ENVM_REMAP_BASE_CR:
+ if (newval != s->regs[offset]) {
+ qemu_log_mask(LOG_UNIMP,
+ TYPE_MSF2_SYSREG": remapping not supported\n");
DEFINE_PROP_UINT8() is enough for both.
+ }
+ break;
+
+ default:
+ if (offset < ARRAY_SIZE(s->regs)) {
+ trace_msf2_sysreg_write(offset << 2, newval, s->regs[offset]);
+ s->regs[offset] = newval;
+ } else {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Bad offset 0x%08" HWADDR_PRIx "\n", __func__,
+ offset << 2);
+ }
+ break;
+ }
+}
+
+static const MemoryRegionOps sysreg_ops = {
+ .read = msf2_sysreg_read,
+ .write = msf2_sysreg_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static void msf2_sysreg_init(Object *obj)
+{
+ MSF2SysregState *s = MSF2_SYSREG(obj);
+
+ memory_region_init_io(&s->iomem, obj, &sysreg_ops, s, TYPE_MSF2_SYSREG,
+ MSF2_SYSREG_MMIO_SIZE);
+ sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem);
+}
+
+static const VMStateDescription vmstate_msf2_sysreg = {
+ .name = TYPE_MSF2_SYSREG,
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32_ARRAY(regs, MSF2SysregState, MSF2_SYSREG_MMIO_SIZE / 4),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static Property msf2_sysreg_properties[] = {
+ /* default divisors in Libero GUI */
+ DEFINE_PROP_UINT32("apb0divisor", MSF2SysregState, apb0div, 2),
+ DEFINE_PROP_UINT32("apb1divisor", MSF2SysregState, apb1div, 2),
Beware these divisors must be power of 2, and maximum 32.This can be checked in msf2_sysreg_realize() ...Ok
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void msf2_sysreg_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->vmsd = &vmstate_msf2_sysreg;
+ dc->reset = msf2_sysreg_reset;
... which would go here:
dc->realize = msf2_sysreg_realize;Ok.uint8_t for both
+ dc->props = msf2_sysreg_properties;
+}
+
+static const TypeInfo msf2_sysreg_info = {
+ .name = TYPE_MSF2_SYSREG,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .class_init = msf2_sysreg_class_init,
+ .instance_size = sizeof(MSF2SysregState),
+ .instance_init = msf2_sysreg_init,
+};
+
+static void msf2_sysreg_register_types(void)
+{
+ type_register_static(&msf2_sysreg_info);
+}
+
+type_init(msf2_sysreg_register_types)
diff --git a/hw/misc/trace-events b/hw/misc/trace-events
index 3313585..616579a 100644
--- a/hw/misc/trace-events
+++ b/hw/misc/trace-events
@@ -61,3 +61,8 @@ mps2_scc_reset(void) "MPS2 SCC: reset"
mps2_scc_leds(char led7, char led6, char led5, char led4, char led3, char led2, char led1, char led0) "MPS2 SCC LEDs: %c%c%c%c%c%c%c%c"
mps2_scc_cfg_write(unsigned function, unsigned device, uint32_t value) "MPS2 SCC config write: function %d device %d data 0x%" PRIx32
mps2_scc_cfg_read(unsigned function, unsigned device, uint32_t value) "MPS2 SCC config read: function %d device %d data 0x%" PRIx32
+
+# hw/misc/msf2-sysreg.c
+msf2_sysreg_write(uint64_t offset, uint32_t val, uint32_t prev) "msf2-sysreg write: addr 0x%08" HWADDR_PRIx " data 0x%" PRIx32 " prev 0x%" PRIx32
+msf2_sysreg_read(uint64_t offset, uint32_t val) "msf2-sysreg read: addr 0x%08" HWADDR_PRIx " data 0x%08" PRIx32
+msf2_sysreg_write_pll_status(void) "Invalid write to read only PLL status register"
diff --git a/include/hw/misc/msf2-sysreg.h b/include/hw/misc/msf2-sysreg. h
new file mode 100644
index 0000000..231f827
--- /dev/null
+++ b/include/hw/misc/msf2-sysreg.h
@@ -0,0 +1,77 @@
+/*
+ * Microsemi SmartFusion2 SYSREG
+ *
+ * Copyright (c) 2017 Subbaraya Sundeep <address@hidden>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef HW_MSF2_SYSREG_H
+#define HW_MSF2_SYSREG_H
+
+#include "hw/sysbus.h"
+
+enum {
+ ESRAM_CR = 0x00 / 4,
+ ESRAM_MAX_LAT,
+ DDR_CR,
+ ENVM_CR,
+ ENVM_REMAP_BASE_CR,
+ ENVM_REMAP_FAB_CR,
+ CC_CR,
+ CC_REGION_CR,
+ CC_LOCK_BASE_ADDR_CR,
+ CC_FLUSH_INDX_CR,
+ DDRB_BUF_TIMER_CR,
+ DDRB_NB_ADDR_CR,
+ DDRB_NB_SIZE_CR,
+ DDRB_CR,
+
+ SOFT_RESET_CR = 0x48 / 4,
+ M3_CR,
+
+ GPIO_SYSRESET_SEL_CR = 0x58 / 4,
+
+ MDDR_CR = 0x60 / 4,
+
+ MSSDDR_PLL_STATUS_LOW_CR = 0x90 / 4,
+ MSSDDR_PLL_STATUS_HIGH_CR,
+ MSSDDR_FACC1_CR,
+ MSSDDR_FACC2_CR,
+
+ MSSDDR_PLL_STATUS = 0x150 / 4,
+};
+
+#define MSF2_SYSREG_MMIO_SIZE 0x300
+
+#define TYPE_MSF2_SYSREG "msf2-sysreg"
+#define MSF2_SYSREG(obj) OBJECT_CHECK(MSF2SysregState, (obj), TYPE_MSF2_SYSREG)
+
+typedef struct MSF2SysregState {
+ SysBusDevice parent_obj;
+
+ MemoryRegion iomem;
+
+ uint32_t apb0div;
+ uint32_t apb1div;
Ok.
+
+ uint32_t regs[MSF2_SYSREG_MMIO_SIZE / 4];
+} MSF2SysregState;
+
+#endif /* HW_MSF2_SYSREG_H */
Acked-by: Philippe Mathieu-Daudé <address@hidden>
Tested-by: Philippe Mathieu-Daudé <address@hidden>
Thank you,Sundeep
| [Prev in Thread] | Current Thread | [Next in Thread] |