Re: [Qemu-arm] [PATCH v2 1/6] aspeed: add support for the witherspoon-bmc board

[Cédric Le Goater]

On 10/09/2017 02:04 AM, Andrew Jeffery wrote:
> On Wed, 2017-09-20 at 09:01 +0200, Cédric Le Goater wrote:
>> The Witherspoon boards are OpenPOWER system hosting POWER9 Processors.
>> Let's add support for their BMC including a couple of I2C devices as
>> found on real HW.
>>  
>> Signed-off-by: Cédric Le Goater <address@hidden>
>> ---
>>  hw/arm/aspeed.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++
>>  1 file changed, 49 insertions(+)
>>  
>> diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
>> index ab895ad490af..81f522f711ae 100644
>> --- a/hw/arm/aspeed.c
>> +++ b/hw/arm/aspeed.c
>> @@ -46,6 +46,7 @@ enum {
>>      PALMETTO_BMC,
>>      AST2500_EVB,
>>      ROMULUS_BMC,
>> +    WITHERSPOON_BMC,
>>  };
>>  
>>  /* Palmetto hardware value: 0x120CE416 */
>> @@ -83,8 +84,12 @@ enum {
>>          SCU_AST2500_HW_STRAP_ACPI_ENABLE |                              \
>>          SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER))
>>  
>> +/* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */
>> +#define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1
>> +
>>  static void palmetto_bmc_i2c_init(AspeedBoardState *bmc);
>>  static void ast2500_evb_i2c_init(AspeedBoardState *bmc);
>> +static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc);
>>  
>>  static const AspeedBoardConfig aspeed_boards[] = {
>>      [PALMETTO_BMC] = {
>> @@ -110,6 +115,14 @@ static const AspeedBoardConfig aspeed_boards[] = {
>>          .spi_model = "mx66l1g45g",
>>          .num_cs    = 2,
>>      },
>> +    [WITHERSPOON_BMC]  = {
>> +        .soc_name  = "ast2500-a1",
>> +        .hw_strap1 = WITHERSPOON_BMC_HW_STRAP1,
>> +        .fmc_model = "mx25l25635e",
>> +        .spi_model = "mx66l1g45g",
>> +        .num_cs    = 2,
>> +        .i2c_init  = witherspoon_bmc_i2c_init,
>> +    },
>>  };
>>  
>>  #define FIRMWARE_ADDR 0x0
>> @@ -337,11 +350,47 @@ static const TypeInfo romulus_bmc_type = {
>>      .class_init = romulus_bmc_class_init,
>>  };
>>  
>> +static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc)
>> +{
>> +    AspeedSoCState *soc = &bmc->soc;
>> +
>> +    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "tmp423", 
>> 0x4c);
>> +    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 5), "tmp423", 
>> 0x4c);
>> +
>> +    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp105", 
>> 0x4a);
> 
> Looks like I need to track down newer versions of the schematics I have.

the device on the board is a tmp275 but the tmp105 model is compatible. 


>> +}
>> +
>> +static void witherspoon_bmc_init(MachineState *machine)
>> +{
>> +    aspeed_board_init(machine, &aspeed_boards[WITHERSPOON_BMC]);
>> +}
>> +
>> +static void witherspoon_bmc_class_init(ObjectClass *oc, void *data)
>> +{
>> +    MachineClass *mc = MACHINE_CLASS(oc);
>> +
>> +    mc->desc = "OpenPOWER Witherspoon BMC (ARM1176)";
>> +    mc->init = witherspoon_bmc_init;
>> +    mc->max_cpus = 1;
>> +    mc->no_sdcard = 1;
>> +    mc->no_floppy = 1;
>> +    mc->no_cdrom = 1;
>> +    mc->no_parallel = 1;
>> +    mc->ignore_memory_transaction_failures = true;
> 
> Aside from the issue with the above as pointed out by Peter,
> 
> Reviewed-by: Andrew Jeffery <address@hidden>

Thanks,

C. 

> 
>> +}
>> +
>> +static const TypeInfo witherspoon_bmc_type = {
>> +    .name = MACHINE_TYPE_NAME("witherspoon-bmc"),
>> +    .parent = TYPE_MACHINE,
>> +    .class_init = witherspoon_bmc_class_init,
>> +};
>> +
>>  static void aspeed_machine_init(void)
>>  {
>>      type_register_static(&palmetto_bmc_type);
>>      type_register_static(&ast2500_evb_type);
>>      type_register_static(&romulus_bmc_type);
>> +    type_register_static(&witherspoon_bmc_type);
>>  }
>>  
>>  type_init(aspeed_machine_init)