qemu-arm
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-arm] [RFC PATCH 20/30] softfloat: half-precision compare functions


From: Alex Bennée
Subject: [Qemu-arm] [RFC PATCH 20/30] softfloat: half-precision compare functions
Date: Fri, 13 Oct 2017 17:24:28 +0100

This is mostly a mechanical conversion of the float32 variants of the
same name with some judicious search/replace and some constants
changed.

Signed-off-by: Alex Bennée <address@hidden>
---
 fpu/softfloat.c         | 216 ++++++++++++++++++++++++++++++++++++++++++++++++
 include/fpu/softfloat.h |   8 ++
 2 files changed, 224 insertions(+)

diff --git a/fpu/softfloat.c b/fpu/softfloat.c
index ff967f5525..fdb2999c41 100644
--- a/fpu/softfloat.c
+++ b/fpu/softfloat.c
@@ -3884,6 +3884,222 @@ float16 float16_div(float16 a, float16 b, float_status 
*status)
 
 }
 
+/*----------------------------------------------------------------------------
+| Returns 1 if the half-precision floating-point value `a' is equal to
+| the corresponding value `b', and 0 otherwise.  The invalid exception is
+| raised if either operand is a NaN.  Otherwise, the comparison is performed
+| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
+*----------------------------------------------------------------------------*/
+
+int float16_eq(float16 a, float16 b, float_status *status)
+{
+    uint32_t av, bv;
+    a = float16_squash_input_denormal(a, status);
+    b = float16_squash_input_denormal(b, status);
+
+    if (    ( ( extractFloat16Exp( a ) == 0x1F ) && extractFloat16Frac( a ) )
+         || ( ( extractFloat16Exp( b ) == 0x1F ) && extractFloat16Frac( b ) )
+       ) {
+        float_raise(float_flag_invalid, status);
+        return 0;
+    }
+    av = float16_val(a);
+    bv = float16_val(b);
+    return ( av == bv ) || ( (uint32_t) ( ( av | bv )<<1 ) == 0 );
+}
+
+/*----------------------------------------------------------------------------
+| Returns 1 if the half-precision floating-point value `a' is less than
+| or equal to the corresponding value `b', and 0 otherwise.  The invalid
+| exception is raised if either operand is a NaN.  The comparison is performed
+| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
+*----------------------------------------------------------------------------*/
+
+int float16_le(float16 a, float16 b, float_status *status)
+{
+    flag aSign, bSign;
+    uint32_t av, bv;
+    a = float16_squash_input_denormal(a, status);
+    b = float16_squash_input_denormal(b, status);
+
+    if (    ( ( extractFloat16Exp( a ) == 0x1F ) && extractFloat16Frac( a ) )
+         || ( ( extractFloat16Exp( b ) == 0x1F ) && extractFloat16Frac( b ) )
+       ) {
+        float_raise(float_flag_invalid, status);
+        return 0;
+    }
+    aSign = extractFloat16Sign( a );
+    bSign = extractFloat16Sign( b );
+    av = float16_val(a);
+    bv = float16_val(b);
+    if ( aSign != bSign ) return aSign || ( (uint32_t) ( ( av | bv )<<1 ) == 0 
);
+    return ( av == bv ) || ( aSign ^ ( av < bv ) );
+
+}
+
+/*----------------------------------------------------------------------------
+| Returns 1 if the half-precision floating-point value `a' is less than
+| the corresponding value `b', and 0 otherwise.  The invalid exception is
+| raised if either operand is a NaN.  The comparison is performed according
+| to the IEC/IEEE Standard for Binary Floating-Point Arithmetic.
+*----------------------------------------------------------------------------*/
+
+int float16_lt(float16 a, float16 b, float_status *status)
+{
+    flag aSign, bSign;
+    uint32_t av, bv;
+    a = float16_squash_input_denormal(a, status);
+    b = float16_squash_input_denormal(b, status);
+
+    if (    ( ( extractFloat16Exp( a ) == 0x1F ) && extractFloat16Frac( a ) )
+         || ( ( extractFloat16Exp( b ) == 0x1F ) && extractFloat16Frac( b ) )
+       ) {
+        float_raise(float_flag_invalid, status);
+        return 0;
+    }
+    aSign = extractFloat16Sign( a );
+    bSign = extractFloat16Sign( b );
+    av = float16_val(a);
+    bv = float16_val(b);
+    if ( aSign != bSign ) return aSign && ( (uint32_t) ( ( av | bv )<<1 ) != 0 
);
+    return ( av != bv ) && ( aSign ^ ( av < bv ) );
+
+}
+
+/*----------------------------------------------------------------------------
+| Returns 1 if the half-precision floating-point values `a' and `b' cannot
+| be compared, and 0 otherwise.  The invalid exception is raised if either
+| operand is a NaN.  The comparison is performed according to the IEC/IEEE
+| Standard for Binary Floating-Point Arithmetic.
+*----------------------------------------------------------------------------*/
+
+int float16_unordered(float16 a, float16 b, float_status *status)
+{
+    a = float16_squash_input_denormal(a, status);
+    b = float16_squash_input_denormal(b, status);
+
+    if (    ( ( extractFloat16Exp( a ) == 0x1F ) && extractFloat16Frac( a ) )
+         || ( ( extractFloat16Exp( b ) == 0x1F ) && extractFloat16Frac( b ) )
+       ) {
+        float_raise(float_flag_invalid, status);
+        return 1;
+    }
+    return 0;
+}
+
+/*----------------------------------------------------------------------------
+| Returns 1 if the half-precision floating-point value `a' is equal to
+| the corresponding value `b', and 0 otherwise.  Quiet NaNs do not cause an
+| exception.  The comparison is performed according to the IEC/IEEE Standard
+| for Binary Floating-Point Arithmetic.
+*----------------------------------------------------------------------------*/
+
+int float16_eq_quiet(float16 a, float16 b, float_status *status)
+{
+    a = float16_squash_input_denormal(a, status);
+    b = float16_squash_input_denormal(b, status);
+
+    if (    ( ( extractFloat16Exp( a ) == 0x1F ) && extractFloat16Frac( a ) )
+         || ( ( extractFloat16Exp( b ) == 0x1F ) && extractFloat16Frac( b ) )
+       ) {
+        if (float16_is_signaling_nan(a, status)
+         || float16_is_signaling_nan(b, status)) {
+            float_raise(float_flag_invalid, status);
+        }
+        return 0;
+    }
+    return ( float16_val(a) == float16_val(b) ) ||
+            ( (uint32_t) ( ( float16_val(a) | float16_val(b) )<<1 ) == 0 );
+}
+
+/*----------------------------------------------------------------------------
+| Returns 1 if the half-precision floating-point value `a' is less than or
+| equal to the corresponding value `b', and 0 otherwise.  Quiet NaNs do not
+| cause an exception.  Otherwise, the comparison is performed according to the
+| IEC/IEEE Standard for Binary Floating-Point Arithmetic.
+*----------------------------------------------------------------------------*/
+
+int float16_le_quiet(float16 a, float16 b, float_status *status)
+{
+    flag aSign, bSign;
+    uint32_t av, bv;
+    a = float16_squash_input_denormal(a, status);
+    b = float16_squash_input_denormal(b, status);
+
+    if (    ( ( extractFloat16Exp( a ) == 0x1F ) && extractFloat16Frac( a ) )
+         || ( ( extractFloat16Exp( b ) == 0x1F ) && extractFloat16Frac( b ) )
+       ) {
+        if (float16_is_signaling_nan(a, status)
+         || float16_is_signaling_nan(b, status)) {
+            float_raise(float_flag_invalid, status);
+        }
+        return 0;
+    }
+    aSign = extractFloat16Sign( a );
+    bSign = extractFloat16Sign( b );
+    av = float16_val(a);
+    bv = float16_val(b);
+    if ( aSign != bSign ) return aSign || ( (uint32_t) ( ( av | bv )<<1 ) == 0 
);
+    return ( av == bv ) || ( aSign ^ ( av < bv ) );
+
+}
+
+/*----------------------------------------------------------------------------
+| Returns 1 if the half-precision floating-point value `a' is less than
+| the corresponding value `b', and 0 otherwise.  Quiet NaNs do not cause an
+| exception.  Otherwise, the comparison is performed according to the IEC/IEEE
+| Standard for Binary Floating-Point Arithmetic.
+*----------------------------------------------------------------------------*/
+
+int float16_lt_quiet(float16 a, float16 b, float_status *status)
+{
+    flag aSign, bSign;
+    uint32_t av, bv;
+    a = float16_squash_input_denormal(a, status);
+    b = float16_squash_input_denormal(b, status);
+
+    if (    ( ( extractFloat16Exp( a ) == 0x1F ) && extractFloat16Frac( a ) )
+         || ( ( extractFloat16Exp( b ) == 0x1F ) && extractFloat16Frac( b ) )
+       ) {
+        if (float16_is_signaling_nan(a, status)
+         || float16_is_signaling_nan(b, status)) {
+            float_raise(float_flag_invalid, status);
+        }
+        return 0;
+    }
+    aSign = extractFloat16Sign( a );
+    bSign = extractFloat16Sign( b );
+    av = float16_val(a);
+    bv = float16_val(b);
+    if ( aSign != bSign ) return aSign && ( (uint32_t) ( ( av | bv )<<1 ) != 0 
);
+    return ( av != bv ) && ( aSign ^ ( av < bv ) );
+
+}
+
+/*----------------------------------------------------------------------------
+| Returns 1 if the half-precision floating-point values `a' and `b' cannot
+| be compared, and 0 otherwise.  Quiet NaNs do not cause an exception.  The
+| comparison is performed according to the IEC/IEEE Standard for Binary
+| Floating-Point Arithmetic.
+*----------------------------------------------------------------------------*/
+
+int float16_unordered_quiet(float16 a, float16 b, float_status *status)
+{
+    a = float16_squash_input_denormal(a, status);
+    b = float16_squash_input_denormal(b, status);
+
+    if (    ( ( extractFloat16Exp( a ) == 0x1F ) && extractFloat16Frac( a ) )
+         || ( ( extractFloat16Exp( b ) == 0x1F ) && extractFloat16Frac( b ) )
+       ) {
+        if (float16_is_signaling_nan(a, status)
+         || float16_is_signaling_nan(b, status)) {
+            float_raise(float_flag_invalid, status);
+        }
+        return 1;
+    }
+    return 0;
+}
+
 /* Half precision floats come in two formats: standard IEEE and "ARM" format.
    The latter gains extra exponent range by omitting the NaN/Inf encodings.  */
 
diff --git a/include/fpu/softfloat.h b/include/fpu/softfloat.h
index f1d79b6d03..76a8310780 100644
--- a/include/fpu/softfloat.h
+++ b/include/fpu/softfloat.h
@@ -350,6 +350,14 @@ float16 float16_add(float16, float16, float_status 
*status);
 float16 float16_sub(float16, float16, float_status *status);
 float16 float16_mul(float16, float16, float_status *status);
 float16 float16_div(float16, float16, float_status *status);
+int float16_eq(float16, float16, float_status *status);
+int float16_le(float16, float16, float_status *status);
+int float16_lt(float16, float16, float_status *status);
+int float16_unordered(float16, float16, float_status *status);
+int float16_eq_quiet(float16, float16, float_status *status);
+int float16_le_quiet(float16, float16, float_status *status);
+int float16_lt_quiet(float16, float16, float_status *status);
+int float16_unordered_quiet(float16, float16, float_status *status);
 
 int float16_is_quiet_nan(float16, float_status *status);
 int float16_is_signaling_nan(float16, float_status *status);
-- 
2.14.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]