[Qemu-arm] [PATCH v4 0/8] Add the ZynqMP PMU and IPI

[Alistair Francis]

This series adds the ZynqMP Power Management Unit (PMU) machine with basic
functionality.

The machine only has the
 - CPU
 - Memory
 - Interrupt controller
 - IPI device

connected, but that is enough to run some of the ROM and firmware
code on the machine

The series also adds the IPI device and connects it to the ZynqMP ARM
side and the ZynqMP PMU. These IPI devices don't connect between the ARM
and MicroBlaze instances though.

V4:
 - Rename the ZCU102 machine to just ZynqMP
 - Rename the PMC SoC to "xlnx,zynqmp-pmu-soc"
 - Move the IPI device to the machine instead of the SoC
V3:
 - Add the interrupt controller
 - Replace some of the error_fatals with errp
 - Fix the PMU CPU name


Alistair Francis (8):
  xlnx-zynqmp-pmu: Initial commit of the ZynqMP PMU
  xlnx-zynqmp-pmu: Add the CPU and memory
  aarch64-softmmu.mak: Use an ARM specific config
  xlnx-pmu-iomod-intc: Add the PMU Interrupt controller
  xlnx-zynqmp-pmu: Connect the PMU interrupt controller
  xlnx-zynqmp-ipi: Initial version of the Xilinx IPI device
  xlnx-zynqmp-pmu: Connect the IPI device to the PMU
  xlnx-zynqmp: Connect the IPI device to the ZynqMP SoC

 default-configs/aarch64-softmmu.mak    |   1 +
 default-configs/microblaze-softmmu.mak |   1 +
 hw/arm/Makefile.objs                   |   2 +-
 hw/arm/xlnx-zynqmp.c                   |  14 +
 hw/display/Makefile.objs               |   2 +-
 hw/dma/Makefile.objs                   |   2 +-
 hw/intc/Makefile.objs                  |   2 +
 hw/intc/xlnx-pmu-iomod-intc.c          | 554 +++++++++++++++++++++++++++++++++
 hw/intc/xlnx-zynqmp-ipi.c              | 377 ++++++++++++++++++++++
 hw/microblaze/Makefile.objs            |   1 +
 hw/microblaze/xlnx-zynqmp-pmu.c        | 204 ++++++++++++
 include/hw/arm/xlnx-zynqmp.h           |   2 +
 include/hw/intc/xlnx-pmu-iomod-intc.h  |  58 ++++
 include/hw/intc/xlnx-zynqmp-ipi.h      |  57 ++++
 14 files changed, 1274 insertions(+), 3 deletions(-)
 create mode 100644 hw/intc/xlnx-pmu-iomod-intc.c
 create mode 100644 hw/intc/xlnx-zynqmp-ipi.c
 create mode 100644 hw/microblaze/xlnx-zynqmp-pmu.c
 create mode 100644 include/hw/intc/xlnx-pmu-iomod-intc.h
 create mode 100644 include/hw/intc/xlnx-zynqmp-ipi.h

-- 
2.11.0