qemu-arm
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-arm] [PATCH] hw/arm: Use more CONFIG switches to decide which


From: Peter Maydell
Subject: Re: [Qemu-arm] [PATCH] hw/arm: Use more CONFIG switches to decide which object files should be linked
Date: Thu, 1 Mar 2018 13:03:39 +0000

On 1 March 2018 at 05:46, Thomas Huth <address@hidden> wrote:
> A lot of ARM object files are linked into the executable unconditionally,
> even though we have corresponding CONFIG switches like CONFIG_PXA2XX or
> CONFIG_OMAP. We should make sure to use these switches in the Makefile so
> that the users can disable certain unwanted boards and devices more easily.
> Also introduce the new switch CONFIG_STRONGARM to be able to disable the
> "Collie" machine if it is not wanted.
>
> Signed-off-by: Thomas Huth <address@hidden>
> ---
>  default-configs/arm-softmmu.mak |  2 ++
>  hw/arm/Makefile.objs            | 26 +++++++++++++++++---------
>  2 files changed, 19 insertions(+), 9 deletions(-)
>
> diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
> index ca34cf4..43f382a 100644
> --- a/default-configs/arm-softmmu.mak
> +++ b/default-configs/arm-softmmu.mak
> @@ -133,3 +133,5 @@ CONFIG_GPIO_KEY=y
>  CONFIG_MSF2=y
>  CONFIG_FW_CFG_DMA=y
>  CONFIG_XILINX_AXI=y
> +
> +CONFIG_STRONGARM=y
> diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
> index 1c896ba..5e1e0a9 100644
> --- a/hw/arm/Makefile.objs
> +++ b/hw/arm/Makefile.objs
> @@ -1,15 +1,23 @@
> -obj-y += boot.o collie.o exynos4_boards.o gumstix.o highbank.o
> -obj-$(CONFIG_DIGIC) += digic_boards.o
> -obj-y += integratorcp.o mainstone.o musicpal.o nseries.o
> -obj-y += omap_sx1.o palm.o realview.o spitz.o stellaris.o
> -obj-y += tosa.o versatilepb.o vexpress.o virt.o xilinx_zynq.o z2.o
> +obj-y += boot.o virt.o sysbus-fdt.o
>  obj-$(CONFIG_ACPI) += virt-acpi-build.o
> -obj-y += netduino2.o
> -obj-y += sysbus-fdt.o
> +obj-$(CONFIG_ARM_V7M) += highbank.o netduino2.o vexpress.o

This is definitely wrong -- highbank and vexpress are not V7M
platforms. Netduino2 is a v7M platform, but I don't think we
should be making it conditional on ARM_V7M -- we have per-board
configs for other boards, so you'd have a CONFIG_NETDUINO2 here
if you wanted it.

> +obj-$(CONFIG_ASPEED_SOC) += integratorcp.o musicpal.o versatilepb.o

This is wrong too -- none of these are aspeed-based devices.

thanks
-- PMM



reply via email to

[Prev in Thread] Current Thread [Next in Thread]