[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-arm] [PATCH v10 10/14] target/arm: Finish implementation of PM
From: |
Laurent Desnogues |
Subject: |
Re: [Qemu-arm] [PATCH v10 10/14] target/arm: Finish implementation of PM[X]EVCNTR and PM[X]EVTYPER |
Date: |
Mon, 4 Feb 2019 20:22:41 +0100 |
Hello,
On Tue, Dec 11, 2018 at 4:25 PM Aaron Lindsay
<address@hidden> wrote:
>
> Add arrays to hold the registers, the definitions themselves, access
> functions, and logic to reset counters when PMCR.P is set. Update
> filtering code to support counters other than PMCCNTR. Support migration
> with raw read/write functions.
>
> Signed-off-by: Aaron Lindsay <address@hidden>
> Signed-off-by: Aaron Lindsay <address@hidden>
> Reviewed-by: Richard Henderson <address@hidden>
> ---
> target/arm/cpu.h | 3 +
> target/arm/helper.c | 296 +++++++++++++++++++++++++++++++++++++++++---
> 2 files changed, 282 insertions(+), 17 deletions(-)
[...]
> diff --git a/target/arm/helper.c b/target/arm/helper.c
> index fd2923f033..1b851d1689 100644
> --- a/target/arm/helper.c
> +++ b/target/arm/helper.c
[...]
> @@ -5301,6 +5526,43 @@ void register_cp_regs_for_features(ARMCPU *cpu)
> };
> define_one_arm_cp_reg(cpu, &pmcr);
> define_one_arm_cp_reg(cpu, &pmcr64);
> + for (i = 0; i < pmcrn; i++) {
> + char *pmevcntr_name = g_strdup_printf("PMEVCNTR%d", i);
> + char *pmevcntr_el0_name = g_strdup_printf("PMEVCNTR%d_EL0", i);
> + char *pmevtyper_name = g_strdup_printf("PMEVTYPER%d", i);
> + char *pmevtyper_el0_name = g_strdup_printf("PMEVTYPER%d_EL0", i);
> + ARMCPRegInfo pmev_regs[] = {
> + { .name = pmevcntr_name, .cp = 15, .crn = 15,
> + .crm = 8 | (3 & (i >> 3)), .opc1 = 0, .opc2 = i & 7,
> + .access = PL0_RW, .type = ARM_CP_IO | ARM_CP_ALIAS,
> + .readfn = pmevcntr_readfn, .writefn = pmevcntr_writefn,
> + .accessfn = pmreg_access },
> + { .name = pmevcntr_el0_name, .state = ARM_CP_STATE_AA64,
> + .opc0 = 3, .opc1 = 3, .crn = 15, .crm = 8 | (3 & (i >> 3)),
> + .opc2 = i & 7, .access = PL0_RW, .accessfn = pmreg_access,
> + .type = ARM_CP_IO,
> + .readfn = pmevcntr_readfn, .writefn = pmevcntr_writefn,
> + .raw_readfn = pmevcntr_rawread,
> + .raw_writefn = pmevcntr_rawwrite },
> + { .name = pmevtyper_name, .cp = 15, .crn = 15,
> + .crm = 12 | (3 & (i >> 3)), .opc1 = 0, .opc2 = i & 7,
> + .access = PL0_RW, .type = ARM_CP_IO | ARM_CP_ALIAS,
> + .readfn = pmevtyper_readfn, .writefn = pmevtyper_writefn,
> + .accessfn = pmreg_access },
> + { .name = pmevtyper_el0_name, .state = ARM_CP_STATE_AA64,
> + .opc0 = 3, .opc1 = 3, .crn = 15, .crm = 12 | (3 & (i >>
> 3)),
Looking at ARM documentation, I think the value for crn should be 14
for PMEVCNTR<n>_EL0 and PMEVTYPER<n>_EL0.
Thanks,
Laurent
> + .opc2 = i & 7, .access = PL0_RW, .accessfn = pmreg_access,
> + .type = ARM_CP_IO,
> + .readfn = pmevtyper_readfn, .writefn = pmevtyper_writefn,
> + .raw_writefn = pmevtyper_rawwrite },
> + REGINFO_SENTINEL
> + };
> + define_arm_cp_regs(cpu, pmev_regs);
> + g_free(pmevcntr_name);
> + g_free(pmevcntr_el0_name);
> + g_free(pmevtyper_name);
> + g_free(pmevtyper_el0_name);
> + }
> #endif
> ARMCPRegInfo clidr = {
> .name = "CLIDR", .state = ARM_CP_STATE_BOTH,
> --
> 2.19.2
>
>
- Re: [Qemu-arm] [PATCH v10 10/14] target/arm: Finish implementation of PM[X]EVCNTR and PM[X]EVTYPER,
Laurent Desnogues <=