[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-arm] [PATCH 00/14] Add model of the Arm Musca devboards
From: |
Peter Maydell |
Subject: |
[Qemu-arm] [PATCH 00/14] Add model of the Arm Musca devboards |
Date: |
Thu, 14 Feb 2019 12:50:53 +0000 |
This patchset adds a model of the Arm Musca devboards
('musca-a' and 'musca-b1').
These boards are described here:
https://developer.arm.com/products/system-design/development-boards/iot-test-chips-and-boards/musca-a-test-chip-board
https://developer.arm.com/products/system-design/development-boards/iot-test-chips-and-boards/musca-b-test-chip-board
They're based on the SSE-200 subsystem for embedded which
we already have a model of. The two boards are somewhat
similar but have a different layout of devices (Musca-B1
puts them behind a more sophisticated PPC setup).
I've tested Musca-A with the Zephyr RTOS's "hello world"
program, and Musca-B1 with Arm Trusted Firmware M.
(Arm-TFM does in theory support also Musca-A, but in practice
it requires proper QSPI flash device support there; Zephyr
currently supports only Musca-A.)
Zephyr getting started guide:
https://docs.zephyrproject.org/latest/getting_started/index.html
Arm-TFM build instructions:
https://git.trustedfirmware.org/trusted-firmware-m.git/about/docs/user_guides/tfm_build_instruction.md
The first half of the patchset is some fairly straightforward
bugfixes and enhancements to various devices; the second half
does the actual implementation.
thanks
-- PMM
Peter Maydell (14):
hw/arm/armsse: Fix miswiring of expansion IRQs
hw/misc/tz-ppc: Support having unused ports in the middle of the range
hw/timer/pl031: Allow use as an embedded-struct device
hw/timer/pl031: Convert to using trace events
hw/char/pl011: Allow use as an embedded-struct device
hw/char/pl011: Support all interrupt lines
hw/char/pl011: Use '0x' prefix when logging hex numbers
hw/arm/armsse: Document SRAM_ADDR_WIDTH property in header comment
hw/arm/armsse: Allow boards to specify init-svtor
hw/arm/musca.c: Implement models of the Musca-A and -B1 boards
hw/arm/musca: Add PPCs
hw/arm/musca: Add MPCs
hw/arm/musca: Wire up PL031 RTC
hw/arm/musca: Wire up PL011 UARTs
hw/arm/Makefile.objs | 1 +
include/hw/arm/armsse.h | 5 +
include/hw/char/pl011.h | 34 ++
include/hw/misc/tz-ppc.h | 8 +-
include/hw/timer/pl031.h | 44 +++
hw/arm/armsse.c | 10 +-
hw/arm/musca.c | 669 ++++++++++++++++++++++++++++++++
hw/char/pl011.c | 81 ++--
hw/misc/tz-ppc.c | 32 ++
hw/timer/pl031.c | 80 ++--
MAINTAINERS | 7 +
default-configs/arm-softmmu.mak | 1 +
hw/timer/trace-events | 6 +
13 files changed, 890 insertions(+), 88 deletions(-)
create mode 100644 include/hw/timer/pl031.h
create mode 100644 hw/arm/musca.c
--
2.20.1
- [Qemu-arm] [PATCH 00/14] Add model of the Arm Musca devboards,
Peter Maydell <=