qemu-arm
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH RFC V2 14/37] arm/virt: Add cpu hotplug events to GED during


From: Gavin Shan
Subject: Re: [PATCH RFC V2 14/37] arm/virt: Add cpu hotplug events to GED during creation
Date: Thu, 28 Sep 2023 11:03:33 +1000
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101 Thunderbird/102.12.0

Hi Salil,

On 9/26/23 20:04, Salil Mehta wrote:
Add CPU Hotplug event to the set of supported ged-events during the creation of
GED device during VM init. Also initialize the memory map for CPU Hotplug
             ^^^^^^^^^^^^^^
             it can be dropped.
control device used in event exchanges between Qemu/VMM and the guest.

Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
---
  hw/arm/virt.c         | 5 ++++-
  include/hw/arm/virt.h | 1 +
  2 files changed, 5 insertions(+), 1 deletion(-)


The changes look good to me:

Reviewed-by: Gavin Shan <gshan@redhat.com>

diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index 070c36054e..5c8a0672dc 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -76,6 +76,7 @@
  #include "hw/mem/pc-dimm.h"
  #include "hw/mem/nvdimm.h"
  #include "hw/acpi/generic_event_device.h"
+#include "hw/acpi/cpu_hotplug.h"
  #include "hw/virtio/virtio-md-pci.h"
  #include "hw/virtio/virtio-iommu.h"
  #include "hw/char/pl011.h"
@@ -155,6 +156,7 @@ static const MemMapEntry base_memmap[] = {
      [VIRT_NVDIMM_ACPI] =        { 0x09090000, NVDIMM_ACPI_IO_LEN},
      [VIRT_PVTIME] =             { 0x090a0000, 0x00010000 },
      [VIRT_SECURE_GPIO] =        { 0x090b0000, 0x00001000 },
+    [VIRT_CPUHP_ACPI] =         { 0x090c0000, ACPI_CPU_HOTPLUG_REG_LEN},
      [VIRT_MMIO] =               { 0x0a000000, 0x00000200 },
      /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size */
      [VIRT_PLATFORM_BUS] =       { 0x0c000000, 0x02000000 },
@@ -640,7 +642,7 @@ static inline DeviceState *create_acpi_ged(VirtMachineState 
*vms)
      DeviceState *dev;
      MachineState *ms = MACHINE(vms);
      int irq = vms->irqmap[VIRT_ACPI_GED];
-    uint32_t event = ACPI_GED_PWR_DOWN_EVT;
+    uint32_t event = ACPI_GED_PWR_DOWN_EVT | ACPI_GED_CPU_HOTPLUG_EVT;
if (ms->ram_slots) {
          event |= ACPI_GED_MEM_HOTPLUG_EVT;
@@ -655,6 +657,7 @@ static inline DeviceState *create_acpi_ged(VirtMachineState 
*vms)
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, vms->memmap[VIRT_ACPI_GED].base);
      sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1, 
vms->memmap[VIRT_PCDIMM_ACPI].base);
+    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 3, vms->memmap[VIRT_CPUHP_ACPI].base);
      sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, qdev_get_gpio_in(vms->gic, 
irq));
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
index fc0469c33f..09a0b2d4f0 100644
--- a/include/hw/arm/virt.h
+++ b/include/hw/arm/virt.h
@@ -85,6 +85,7 @@ enum {
      VIRT_PCDIMM_ACPI,
      VIRT_ACPI_GED,
      VIRT_NVDIMM_ACPI,
+    VIRT_CPUHP_ACPI,
      VIRT_PVTIME,
      VIRT_LOWMEMMAP_LAST,
  };

Thanks,
Gavin




reply via email to

[Prev in Thread] Current Thread [Next in Thread]