[PATCH 2/3] hw/arm/virt: Rename VIRT_UART and VIRT_SECURE_UART to VIRT_UART[01]

[Peter Maydell]

We're going to make the second UART not always a secure-only device.
Rename the constants VIRT_UART and VIRT_SECURE_UART to VIRT_UART0
and VIRT_UART1 accordingly.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/arm/virt.h    |  4 ++--
 hw/arm/virt-acpi-build.c | 12 ++++++------
 hw/arm/virt.c            | 14 +++++++-------
 3 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
index f69239850e6..0de58328b2f 100644
--- a/include/hw/arm/virt.h
+++ b/include/hw/arm/virt.h
@@ -59,7 +59,7 @@ enum {
     VIRT_GIC_ITS,
     VIRT_GIC_REDIST,
     VIRT_SMMU,
-    VIRT_UART,
+    VIRT_UART0,
     VIRT_MMIO,
     VIRT_RTC,
     VIRT_FW_CFG,
@@ -69,7 +69,7 @@ enum {
     VIRT_PCIE_ECAM,
     VIRT_PLATFORM_BUS,
     VIRT_GPIO,
-    VIRT_SECURE_UART,
+    VIRT_UART1,
     VIRT_SECURE_MEM,
     VIRT_SECURE_GPIO,
     VIRT_PCDIMM_ACPI,
diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index 9ce136cd88c..54f26640982 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -483,14 +483,14 @@ build_spcr(GArray *table_data, BIOSLinker *linker, 
VirtMachineState *vms)
     build_append_int_noprefix(table_data, 0, 3); /* Reserved */
     /* Base Address */
     build_append_gas(table_data, AML_AS_SYSTEM_MEMORY, 8, 0, 1,
-                     vms->memmap[VIRT_UART].base);
+                     vms->memmap[VIRT_UART0].base);
     /* Interrupt Type */
     build_append_int_noprefix(table_data,
         (1 << 3) /* Bit[3] ARMH GIC interrupt */, 1);
     build_append_int_noprefix(table_data, 0, 1); /* IRQ */
     /* Global System Interrupt */
     build_append_int_noprefix(table_data,
-                              vms->irqmap[VIRT_UART] + ARM_SPI_BASE, 4);
+                              vms->irqmap[VIRT_UART0] + ARM_SPI_BASE, 4);
     build_append_int_noprefix(table_data, 3 /* 9600 */, 1); /* Baud Rate */
     build_append_int_noprefix(table_data, 0 /* No Parity */, 1); /* Parity */
     /* Stop Bits */
@@ -674,11 +674,11 @@ build_dbg2(GArray *table_data, BIOSLinker *linker, 
VirtMachineState *vms)
 
     /* BaseAddressRegister[] */
     build_append_gas(table_data, AML_AS_SYSTEM_MEMORY, 8, 0, 1,
-                     vms->memmap[VIRT_UART].base);
+                     vms->memmap[VIRT_UART0].base);
 
     /* AddressSize[] */
     build_append_int_noprefix(table_data,
-                              vms->memmap[VIRT_UART].size, 4);
+                              vms->memmap[VIRT_UART0].size, 4);
 
     /* NamespaceString[] */
     g_array_append_vals(table_data, name, namespace_length);
@@ -859,8 +859,8 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, 
VirtMachineState *vms)
      */
     scope = aml_scope("\\_SB");
     acpi_dsdt_add_cpus(scope, vms);
-    acpi_dsdt_add_uart(scope, &memmap[VIRT_UART],
-                       (irqmap[VIRT_UART] + ARM_SPI_BASE));
+    acpi_dsdt_add_uart(scope, &memmap[VIRT_UART0],
+                       (irqmap[VIRT_UART0] + ARM_SPI_BASE));
     if (vmc->acpi_expose_flash) {
         acpi_dsdt_add_flash(scope, &memmap[VIRT_FLASH]);
     }
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index b714ff1c03d..fd524aed6b6 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -144,11 +144,11 @@ static const MemMapEntry base_memmap[] = {
     [VIRT_GIC_ITS] =            { 0x08080000, 0x00020000 },
     /* This redistributor space allows up to 2*64kB*123 CPUs */
     [VIRT_GIC_REDIST] =         { 0x080A0000, 0x00F60000 },
-    [VIRT_UART] =               { 0x09000000, 0x00001000 },
+    [VIRT_UART0] =              { 0x09000000, 0x00001000 },
     [VIRT_RTC] =                { 0x09010000, 0x00001000 },
     [VIRT_FW_CFG] =             { 0x09020000, 0x00000018 },
     [VIRT_GPIO] =               { 0x09030000, 0x00001000 },
-    [VIRT_SECURE_UART] =        { 0x09040000, 0x00001000 },
+    [VIRT_UART1] =              { 0x09040000, 0x00001000 },
     [VIRT_SMMU] =               { 0x09050000, 0x00020000 },
     [VIRT_PCDIMM_ACPI] =        { 0x09070000, MEMORY_HOTPLUG_IO_LEN },
     [VIRT_ACPI_GED] =           { 0x09080000, ACPI_GED_EVT_SEL_LEN },
@@ -191,11 +191,11 @@ static MemMapEntry extended_memmap[] = {
 };
 
 static const int a15irqmap[] = {
-    [VIRT_UART] = 1,
+    [VIRT_UART0] = 1,
     [VIRT_RTC] = 2,
     [VIRT_PCIE] = 3, /* ... to 6 */
     [VIRT_GPIO] = 7,
-    [VIRT_SECURE_UART] = 8,
+    [VIRT_UART1] = 8,
     [VIRT_ACPI_GED] = 9,
     [VIRT_MMIO] = 16, /* ...to 16 + NUM_VIRTIO_TRANSPORTS - 1 */
     [VIRT_GIC_V2M] = 48, /* ...to 48 + NUM_GICV2M_SPIS - 1 */
@@ -889,7 +889,7 @@ static void create_uart(const VirtMachineState *vms, int 
uart,
     qemu_fdt_setprop(ms->fdt, nodename, "clock-names",
                          clocknames, sizeof(clocknames));
 
-    if (uart == VIRT_UART) {
+    if (uart == VIRT_UART0) {
         qemu_fdt_setprop_string(ms->fdt, "/chosen", "stdout-path", nodename);
         qemu_fdt_setprop_string(ms->fdt, "/aliases", "serial0", nodename);
     } else {
@@ -2269,11 +2269,11 @@ static void machvirt_init(MachineState *machine)
 
     fdt_add_pmu_nodes(vms);
 
-    create_uart(vms, VIRT_UART, sysmem, serial_hd(0));
+    create_uart(vms, VIRT_UART0, sysmem, serial_hd(0));
 
     if (vms->secure) {
         create_secure_ram(vms, secure_sysmem, secure_tag_sysmem);
-        create_uart(vms, VIRT_SECURE_UART, secure_sysmem, serial_hd(1));
+        create_uart(vms, VIRT_UART1, secure_sysmem, serial_hd(1));
     }
 
     if (tag_sysmem) {
-- 
2.34.1