qemu-block
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-block] [PULL 11/25] block: driver should override flags in bdrv_op


From: Kevin Wolf
Subject: [Qemu-block] [PULL 11/25] block: driver should override flags in bdrv_open()
Date: Fri, 12 Jun 2015 18:23:20 +0200

From: Max Reitz <address@hidden>

The BDRV_O_PROTOCOL flag should have an impact only if no driver is
specified explicitly. Therefore, if bdrv_open() is called with an
explicit block driver argument (either through the options QDict or
through the drv parameter) and that block driver is a protocol block
driver, BDRV_O_PROTOCOL should be set; if it is a format block driver,
BDRV_O_PROTOCOL should be unset.

While there was code to unset the flag in case a format block driver
has been selected, it only followed the bdrv_fill_options() function
call whereas the flag in fact needs to be adjusted before it is used
there.

With that change, BDRV_O_PROTOCOL will always be set if the BDS should
be a protocol driver; if the driver has been specified explicitly, the
new code will set it; and bdrv_fill_options() will only "probe" a
protocol driver if BDRV_O_PROTOCOL is set. The probing after
bdrv_fill_options() cannot select a protocol driver.

Thus, bdrv_open_image() to open BDS.file is never called if a protocol
BDS is about to be created. With that change in turn it is impossible to
call bdrv_open_common() with a protocol drv and file != NULL, which
allows us to remove the bdrv_swap() call.

This change breaks a test case in qemu-iotest 051:
"-drive file=t.qcow2,file.driver=qcow2" now works because the explicitly
specified "qcow2" overrides the BDRV_O_PROTOCOL which is automatically
set for the "file" BDS (and the filename is just passed down).
Therefore, this patch removes that test case.

Signed-off-by: Max Reitz <address@hidden>
Signed-off-by: Kevin Wolf <address@hidden>
---
 block.c                    | 49 +++++++++++++++++++++++++++++-----------------
 tests/qemu-iotests/051     |  1 -
 tests/qemu-iotests/051.out |  3 ---
 3 files changed, 31 insertions(+), 22 deletions(-)

diff --git a/block.c b/block.c
index 4ea2c4f..b2e784e 100644
--- a/block.c
+++ b/block.c
@@ -806,14 +806,6 @@ static int bdrv_open_common(BlockDriverState *bs, 
BlockDriverState *file,
     }
     qdict_del(options, "node-name");
 
-    /* bdrv_open() with directly using a protocol as drv. This layer is already
-     * opened, so assign it to bs (while file becomes a closed 
BlockDriverState)
-     * and return immediately. */
-    if (file != NULL && drv->bdrv_file_open) {
-        bdrv_swap(file, bs);
-        return 0;
-    }
-
     bs->open_flags = flags;
     bs->guest_block_size = 512;
     bs->request_alignment = 512;
@@ -942,14 +934,17 @@ static QDict *parse_json_filename(const char *filename, 
Error **errp)
 /*
  * Fills in default options for opening images and converts the legacy
  * filename/flags pair to option QDict entries.
+ * The BDRV_O_PROTOCOL flag in *flags will be set or cleared accordingly if a
+ * block driver has been specified explicitly.
  */
-static int bdrv_fill_options(QDict **options, const char **pfilename, int 
flags,
-                             BlockDriver *drv, Error **errp)
+static int bdrv_fill_options(QDict **options, const char **pfilename,
+                             int *flags, BlockDriver *drv, Error **errp)
 {
     const char *filename = *pfilename;
     const char *drvname;
-    bool protocol = flags & BDRV_O_PROTOCOL;
+    bool protocol = *flags & BDRV_O_PROTOCOL;
     bool parse_filename = false;
+    BlockDriver *tmp_drv;
     Error *local_err = NULL;
 
     /* Parse json: pseudo-protocol */
@@ -967,6 +962,24 @@ static int bdrv_fill_options(QDict **options, const char 
**pfilename, int flags,
         *pfilename = filename = NULL;
     }
 
+    drvname = qdict_get_try_str(*options, "driver");
+
+    /* If the user has explicitly specified the driver, this choice should
+     * override the BDRV_O_PROTOCOL flag */
+    tmp_drv = drv;
+    if (!tmp_drv && drvname) {
+        tmp_drv = bdrv_find_format(drvname);
+    }
+    if (tmp_drv) {
+        protocol = tmp_drv->bdrv_file_open;
+    }
+
+    if (protocol) {
+        *flags |= BDRV_O_PROTOCOL;
+    } else {
+        *flags &= ~BDRV_O_PROTOCOL;
+    }
+
     /* Fetch the file name from the options QDict if necessary */
     if (protocol && filename) {
         if (!qdict_haskey(*options, "filename")) {
@@ -981,7 +994,6 @@ static int bdrv_fill_options(QDict **options, const char 
**pfilename, int flags,
 
     /* Find the right block driver */
     filename = qdict_get_try_str(*options, "filename");
-    drvname = qdict_get_try_str(*options, "driver");
 
     if (drv) {
         if (drvname) {
@@ -1317,7 +1329,7 @@ int bdrv_open(BlockDriverState **pbs, const char 
*filename,
         options = qdict_new();
     }
 
-    ret = bdrv_fill_options(&options, &filename, flags, drv, &local_err);
+    ret = bdrv_fill_options(&options, &filename, &flags, drv, &local_err);
     if (local_err) {
         goto fail;
     }
@@ -1336,11 +1348,6 @@ int bdrv_open(BlockDriverState **pbs, const char 
*filename,
     }
 
     assert(drvname || !(flags & BDRV_O_PROTOCOL));
-    if (drv && !drv->bdrv_file_open) {
-        /* If the user explicitly wants a format driver here, we'll need to add
-         * another layer for the protocol in bs->file */
-        flags &= ~BDRV_O_PROTOCOL;
-    }
 
     bs->options = options;
     options = qdict_clone_shallow(options);
@@ -1377,6 +1384,12 @@ int bdrv_open(BlockDriverState **pbs, const char 
*filename,
         goto fail;
     }
 
+    /* BDRV_O_PROTOCOL must be set iff a protocol BDS is about to be created */
+    assert(!!(flags & BDRV_O_PROTOCOL) == !!drv->bdrv_file_open);
+    /* file must be NULL if a protocol BDS is about to be created
+     * (the inverse results in an error message from bdrv_open_common()) */
+    assert(!(flags & BDRV_O_PROTOCOL) || !file);
+
     /* Open the image */
     ret = bdrv_open_common(bs, file, options, flags, drv, &local_err);
     if (ret < 0) {
diff --git a/tests/qemu-iotests/051 b/tests/qemu-iotests/051
index 0360f37..4a8055b 100755
--- a/tests/qemu-iotests/051
+++ b/tests/qemu-iotests/051
@@ -194,7 +194,6 @@ echo === Specifying the protocol layer ===
 echo
 
 run_qemu -drive file="$TEST_IMG",file.driver=file
-run_qemu -drive file="$TEST_IMG",file.driver=qcow2
 
 echo
 echo === Leaving out required options ===
diff --git a/tests/qemu-iotests/051.out b/tests/qemu-iotests/051.out
index 2890eac..652dd63 100644
--- a/tests/qemu-iotests/051.out
+++ b/tests/qemu-iotests/051.out
@@ -253,9 +253,6 @@ Testing: -drive file=TEST_DIR/t.qcow2,file.driver=file
 QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) qququiquit
 
-Testing: -drive file=TEST_DIR/t.qcow2,file.driver=qcow2
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.driver=qcow2: Block format 
'qcow2' used by device '' doesn't support the option 'filename'
-
 
 === Leaving out required options ===
 
-- 
1.8.3.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]