[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-block] [PULL 32/55] qcow2: Prepare l2_allocate() for adding L2 sli
From: |
Kevin Wolf |
Subject: |
[Qemu-block] [PULL 32/55] qcow2: Prepare l2_allocate() for adding L2 slice support |
Date: |
Tue, 13 Feb 2018 18:05:06 +0100 |
From: Alberto Garcia <address@hidden>
Adding support for L2 slices to l2_allocate() needs (among other
things) an extra loop that iterates over all slices of a new L2 table.
Putting all changes in one patch would make it hard to read because
all semantic changes would be mixed with pure indentation changes.
To make things easier this patch simply creates a new block and
changes the indentation of all lines of code inside it. Thus, all
modifications in this patch are cosmetic. There are no semantic
changes and no variables are renamed yet. The next patch will take
care of that.
Signed-off-by: Alberto Garcia <address@hidden>
Reviewed-by: Eric Blake <address@hidden>
Reviewed-by: Max Reitz <address@hidden>
Message-id: address@hidden
Signed-off-by: Max Reitz <address@hidden>
---
block/qcow2-cluster.c | 53 ++++++++++++++++++++++++++++-----------------------
1 file changed, 29 insertions(+), 24 deletions(-)
diff --git a/block/qcow2-cluster.c b/block/qcow2-cluster.c
index 542080aed0..3f7272441d 100644
--- a/block/qcow2-cluster.c
+++ b/block/qcow2-cluster.c
@@ -299,38 +299,43 @@ static int l2_allocate(BlockDriverState *bs, int
l1_index, uint64_t **table)
/* allocate a new entry in the l2 cache */
trace_qcow2_l2_allocate_get_empty(bs, l1_index);
- ret = qcow2_cache_get_empty(bs, s->l2_table_cache, l2_offset, (void**)
table);
- if (ret < 0) {
- goto fail;
- }
+ {
+ ret = qcow2_cache_get_empty(bs, s->l2_table_cache,
+ l2_offset,
+ (void **) table);
+ if (ret < 0) {
+ goto fail;
+ }
- l2_table = *table;
+ l2_table = *table;
- if ((old_l2_offset & L1E_OFFSET_MASK) == 0) {
- /* if there was no old l2 table, clear the new table */
- memset(l2_table, 0, s->l2_size * sizeof(uint64_t));
- } else {
- uint64_t* old_table;
+ if ((old_l2_offset & L1E_OFFSET_MASK) == 0) {
+ /* if there was no old l2 table, clear the new table */
+ memset(l2_table, 0, s->l2_size * sizeof(uint64_t));
+ } else {
+ uint64_t *old_table;
- /* if there was an old l2 table, read it from the disk */
- BLKDBG_EVENT(bs->file, BLKDBG_L2_ALLOC_COW_READ);
- ret = qcow2_cache_get(bs, s->l2_table_cache,
- old_l2_offset & L1E_OFFSET_MASK,
- (void**) &old_table);
- if (ret < 0) {
- goto fail;
+ /* if there was an old l2 table, read it from the disk */
+ BLKDBG_EVENT(bs->file, BLKDBG_L2_ALLOC_COW_READ);
+ ret = qcow2_cache_get(bs, s->l2_table_cache,
+ old_l2_offset & L1E_OFFSET_MASK,
+ (void **) &old_table);
+ if (ret < 0) {
+ goto fail;
+ }
+
+ memcpy(l2_table, old_table, s->cluster_size);
+
+ qcow2_cache_put(s->l2_table_cache, (void **) &old_table);
}
- memcpy(l2_table, old_table, s->cluster_size);
+ /* write the l2 table to the file */
+ BLKDBG_EVENT(bs->file, BLKDBG_L2_ALLOC_WRITE);
- qcow2_cache_put(s->l2_table_cache, (void **) &old_table);
+ trace_qcow2_l2_allocate_write_l2(bs, l1_index);
+ qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_table);
}
- /* write the l2 table to the file */
- BLKDBG_EVENT(bs->file, BLKDBG_L2_ALLOC_WRITE);
-
- trace_qcow2_l2_allocate_write_l2(bs, l1_index);
- qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_table);
ret = qcow2_cache_flush(bs, s->l2_table_cache);
if (ret < 0) {
goto fail;
--
2.13.6
- [Qemu-block] [PULL 24/55] qcow2: Remove BDS parameter from qcow2_cache_destroy(), (continued)
- [Qemu-block] [PULL 24/55] qcow2: Remove BDS parameter from qcow2_cache_destroy(), Kevin Wolf, 2018/02/13
- [Qemu-block] [PULL 28/55] qcow2: Add offset_to_l1_index(), Kevin Wolf, 2018/02/13
- [Qemu-block] [PULL 37/55] qcow2: Update qcow2_alloc_cluster_link_l2() to support L2 slices, Kevin Wolf, 2018/02/13
- [Qemu-block] [PULL 35/55] qcow2: Update get_cluster_table() to support L2 slices, Kevin Wolf, 2018/02/13
- [Qemu-block] [PULL 33/55] qcow2: Update l2_allocate() to support L2 slices, Kevin Wolf, 2018/02/13
- [Qemu-block] [PULL 25/55] qcow2: Remove BDS parameter from qcow2_cache_clean_unused(), Kevin Wolf, 2018/02/13
- [Qemu-block] [PULL 38/55] qcow2: Update handle_copied() to support L2 slices, Kevin Wolf, 2018/02/13
- [Qemu-block] [PULL 30/55] qcow2: Add offset_to_l2_slice_index(), Kevin Wolf, 2018/02/13
- [Qemu-block] [PULL 27/55] qcow2: Remove BDS parameter from qcow2_cache_is_table_offset(), Kevin Wolf, 2018/02/13
- [Qemu-block] [PULL 31/55] qcow2: Update l2_load() to support L2 slices, Kevin Wolf, 2018/02/13
- [Qemu-block] [PULL 32/55] qcow2: Prepare l2_allocate() for adding L2 slice support,
Kevin Wolf <=
- [Qemu-block] [PULL 34/55] qcow2: Refactor get_cluster_table(), Kevin Wolf, 2018/02/13
- [Qemu-block] [PULL 44/55] qcow2: Read refcount before L2 table in expand_zero_clusters_in_l1(), Kevin Wolf, 2018/02/13
- [Qemu-block] [PULL 41/55] qcow2: Update zero_single_l2() to support L2 slices, Kevin Wolf, 2018/02/13
- [Qemu-block] [PULL 39/55] qcow2: Update handle_alloc() to support L2 slices, Kevin Wolf, 2018/02/13
- [Qemu-block] [PULL 42/55] qcow2: Prepare qcow2_update_snapshot_refcount() for adding L2 slice support, Kevin Wolf, 2018/02/13
- [Qemu-block] [PULL 36/55] qcow2: Update qcow2_get_cluster_offset() to support L2 slices, Kevin Wolf, 2018/02/13
- [Qemu-block] [PULL 40/55] qcow2: Update discard_single_l2() to support L2 slices, Kevin Wolf, 2018/02/13
- [Qemu-block] [PULL 43/55] qcow2: Update qcow2_update_snapshot_refcount() to support L2 slices, Kevin Wolf, 2018/02/13
- [Qemu-block] [PULL 45/55] qcow2: Prepare expand_zero_clusters_in_l1() for adding L2 slice support, Kevin Wolf, 2018/02/13
- [Qemu-block] [PULL 47/55] qcow2: Update qcow2_truncate() to support L2 slices, Kevin Wolf, 2018/02/13