[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [Qemu-devel] build problems on SuSE 9.1 w/CVS from 2004/05/31
From: |
Natalia Portillo |
Subject: |
RE: [Qemu-devel] build problems on SuSE 9.1 w/CVS from 2004/05/31 |
Date: |
Thu, 15 Jul 2004 14:30:49 +0100 |
Mmm,
I just got the SAME error with the CVS, but it says no SDL found (it is).
Also don't work downloading SDL source and doing make/make install.
Isn't there any solution?
I did not found it searching the mailing list.
> -----Mensaje original-----
> De: address@hidden
> [mailto:address@hidden
> En nombre de Kyle Hayes
> Enviado el: lunes, 31 de mayo de 2004 20:16
> Para: address@hidden
> Asunto: [Qemu-devel] build problems on SuSE 9.1 w/CVS from 2004/05/31
>
>
> I'm building with CVS from today. My system is a P4 w/SuSE
> 9.1 installed,
> 2.6.4 kernel.
>
> I see two problems:
>
> 1) when I run configure, I apparently cannot build anything
> that needs static SDL:
>
> linux:~/qemu/qemu # ./configure --prefix=/usr/local --enable-slirp
> Install prefix /usr/local
> BIOS directory /usr/local/share/qemu
> binary directory /usr/local/bin
> Manual directory /usr/local/share/man
> ELF interp prefix /usr/gnemul/qemu-%M
> Source path /root/qemu/qemu
> C compiler gcc
> make make
> host CPU i386
> host big endian no
> target list i386-user i386 i386-softmmu arm-user
> sparc-user ppc-user
> ppc-softmmu
> gprof enabled no
> static build no
> SDL support yes
> SDL static link no
> mingw32 support no
> WARNING: cannot compile statically with SDL - qemu-fast won't
> have a graphical output
>
> I've installed all the SDL packages that SuSE 9.1 has. Both
> sdl-config and aalib-config report that there are static libs:
>
> linux:~/qemu/qemu # aalib-config --static-libs -L/usr/lib
> -Wl,-rpath,/usr/lib -laa -lm -L/usr/X11R6/lib -lX11 -lgpm -lslang
>
> linux:~/qemu/qemu # sdl-config --static-libs -L/usr/lib
> -Wl,-rpath,/usr/lib -lSDL -lpthread -lm -ldl -lasound
> -L/usr/X11R6/lib -lX11 -lXext -laa
>
> Under Gentoo, I had a problem with libasound.a missing.
> However, under SuSE 9.1, it is there:
>
> linux:~/qemu/qemu # locate libasound
> /usr/lib/libasound.a
> /usr/lib/libasound.la
> /usr/lib/libasound.so
> /usr/lib/libasound.so.2
> /usr/lib/libasound.so.2.0.0
>
> I thought I would try to build anyway. I don't usually use
> qemu-fast, so this wasn't really a problem. However, I find this:
>
> linux:~/qemu/qemu # make
> gcc -Wall -O2 -g -D_GNU_SOURCE -o dyngen dyngen.c gcc -Wall
> -O2 -g -g -D_GNU_SOURCE -o qemu-mkcow qemu-mkcow.c gcc -Wall
> -O2 -g -g -D_GNU_SOURCE -o vmdk2raw vmdk2raw.c for d in
> i386-user i386 i386-softmmu arm-user sparc-user ppc-user
> ppc-softmmu; do \ make -C $d all || exit 1 ; \
> done
> make[1]: Entering directory `/root/qemu/qemu/i386-user'
> gcc -Wall -O2 -g -fomit-frame-pointer -I.
> -I/root/qemu/qemu/target-i386 -I/root/qemu/qemu
> -I/root/qemu/qemu/linux-user
> -I/root/qemu/qemu/linux-user/i386 -D_GNU_SOURCE
> -I/root/qemu/qemu/slirp -c -o elfload.o
> /root/qemu/qemu/linux-user/elfload.c
> gcc -Wall -O2 -g -fomit-frame-pointer -I.
> -I/root/qemu/qemu/target-i386 -I/root/qemu/qemu
> -I/root/qemu/qemu/linux-user
> -I/root/qemu/qemu/linux-user/i386 -D_GNU_SOURCE
> -I/root/qemu/qemu/slirp -c -o main.o
> /root/qemu/qemu/linux-user/main.c gcc -Wall -O2 -g
> -fomit-frame-pointer -I. -I/root/qemu/qemu/target-i386
> -I/root/qemu/qemu -I/root/qemu/qemu/linux-user
> -I/root/qemu/qemu/linux-user/i386 -D_GNU_SOURCE
> -I/root/qemu/qemu/slirp -c -o syscall.o
> /root/qemu/qemu/linux-user/syscall.c
> /root/qemu/qemu/linux-user/syscall.c: In function `do_setsockopt':
> /root/qemu/qemu/linux-user/syscall.c:579: error:
> `SO_BSDCOMPAT' undeclared (first use in this function)
> /root/qemu/qemu/linux-user/syscall.c:579: error: (Each
> undeclared identifier is reported only once
> /root/qemu/qemu/linux-user/syscall.c:579: error: for each
> function it appears in.)
> /root/qemu/qemu/linux-user/syscall.c: In function `do_syscall':
> /root/qemu/qemu/linux-user/syscall.c:1633: warning:
> dereferencing type-punned pointer will break strict-aliasing rules
> make[1]: *** [syscall.o] Error 1
> make[1]: Leaving directory `/root/qemu/qemu/i386-user'
> make: *** [all] Error 1
>
> I've done a grep -r in /usr/include and nothing in there has
> "SO_BSDCOMPAT"
> set. I've searched the mailing list archive for this and do
> not see anything about it.
>
> If I comment that one line (line 579 in syscall.c) out, then
> the build succeeds. I have not had a chance to use it yet.
> I rather suspect that this will break something somewhere. I
> don't use the user-mode of QEMU either, but still....
>
> Best,
> Kyle
>
>
>
>
> _______________________________________________
> Qemu-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/qemu-devel
>
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- RE: [Qemu-devel] build problems on SuSE 9.1 w/CVS from 2004/05/31,
Natalia Portillo <=