[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] Boot failure in Mandrika 9.1 on qemu-system-ppc
From: |
Noah yan |
Subject: |
[Qemu-devel] Boot failure in Mandrika 9.1 on qemu-system-ppc |
Date: |
Fri, 17 Jun 2005 17:44:55 -0500 |
Hi, I am new and tried to use qemu ppc to boot mandrika linux 9.1. It
fails with follow errorsl Can somebody helps on this? Appreciate any
comments you have in advance.
sudo ./qemu-0.7.0install/bin/qemu-system-ppc -cdrom /dev/hdc -boot d
-hda linuxppc.img -nographic
(qemu) register PCI host 'pci' 'pci' 'uni-north' 'AAPL,UniNorth'
register 'pci' 'pci' 'uni-north' 'AAPL,UniNorth' 0xf2000000 in
'device-tree' 0xffffffff
Done 582b000 582b900
register pci device 'Qemu VGA' 0000000c 'display' 'VGA' 'Qemu VGA'
register 'Qemu VGA' 'display' 'VGA' 'Qemu VGA' 0x0000000c in 'pci' 0xf2000000
Done 582b900 582ba00
register pci device 'NE2000' 0000000d 'network' '<null>' 'NE2000 PCI'
register 'NE2000' 'network' '<null>' 'NE2000 PCI' 0x0000000d in 'pci' 0xf2000000
Done 582b900 582bb00
register pci device 'mac-io' 0000000e 'mac-io' 'Keylargo' 'AAPL,Keylargo'
register 'mac-io' 'mac-io' 'Keylargo' 'AAPL,Keylargo' 0x0000000e in
'pci' 0xf2000000
Done 582b900 582bc00
PPC Open Hack'Ware BIOS for qemu version 0.4.1
Build 2005-04-06 21:21:03
Copyright 2003-2005 Jocelyn Mayer
Memory size: 144 MB.
Booting from device d
ide0: drive 0: Hard Disk
ERROR: OF_property_copy cannot get property 'hd' for aliases
ide0: drive 1: none
ide1: drive 0: CD-ROM
ERROR: OF_property_copy cannot get property 'cd' for aliases
ide1: drive 1: none
Probe partitions for device c
New bootfile
Probe partitions for device e
Found Apple partition map...
Not a bootable partition 0 0 (0 5831c80)
Partition: 2 MandrivaLinux2005PPC-1 st 10 size 156f50
New bootfile
HFS volume
ERROR: Found boot partition : 5831c80 582e800
ERROR: Not a MACH-O file
Boot: 38000000 3d600000 616b0018 7d7a03a6
Bootinfos at : 300000
Now boot it... (0)
stack: 5bfff70 malloc_base: 0 0x05800000 0x06000000
ERROR: Give range: start 0x300000 0x100000
Config file read, 32768 bytes
Welcome to Mandrakelinux PPC!
Hit <TAB> for boot options.
Thanks for choosing Mandrakelinux PPC. The following is a short
explanation of the various options for booting the install CD.
All options ending with "-power4" use the kernel for ppc 9xx and POWER4.
All options ending with "-ppc601" use the kernel for ppc601 (failsafe).
The default syntax with no suffix uses the kernel for ppc 603/604/75x/74xx.
The default if you just hit enter is "install-gui".
install-gui: uses Xorg fbdev mode
install-text: text based install
install-net: allows you to use a minimal boot CD,
pulling the rest of the install from
a network server
install-net-text: text mode network install
rescue: boots the rescue image
rescue-net: boots the rescue image from a network server
Welcome to yaboot version 1.3.13
Enter "help" to get some basic usage information
WARNING: Bootstrap partition type is wrong: "Apple_HFS"
type should be: "Apple_Bootstrap"
boot:
* install-gui install-gui-power4 install-gui-ppc601
install-text install-text-power4 install-text-ppc601
install-net install-net-power4 install-net-ppc601
install-net-text install-net-text-power4 install-net-text-ppc601
rescue rescue-power4 rescue-ppc601
rescue-net rescue-net-power4 rescue-net-ppc601
boot: install-gui
Please wait, loading kernel...
ERROR: Give range: start 0x1400000 0x500000
Elf32 kernel loaded...
Loading ramdisk...
ERROR: Give range: start 0x1900000 0x400000
ERROR: Give range: start 0x1d00000 0x400000
HFS ERROR in hfs_get_bloc: Block 8192 not found
ERROR: bloc: -1 part size: 1404752 5831c80
ramdisk loaded at 01900000, size: 4095 Kbytes
instantiating rtas at 00600000 ... done
ERROR: OF_property_copy cannot get property 'device_type' for aliases
ERROR: OF_property_copy cannot get property 'device_type' for chosen
ERROR: OF_property_copy cannot get property 'device_type' for packages
ERROR: OF_property_copy cannot get property 'device_type' for cpus
ERROR: OF_property_copy cannot get property 'device_type' for options
ERROR: OF_property_copy cannot get property 'device_type' for rom
ERROR: OF_property_copy cannot get property 'device_type' for boot-rom
ERROR: OF_property_copy cannot get property 'device_type' for pseudo-hid
ERROR: OF_property_copy cannot get property 'device_type' for mmu
ERROR: OF_property_copy cannot get property 'device_type' for isa
ERROR: OF_property_copy cannot get property 'device_type' for rtas
ERROR: OF_property_copy cannot get property 'device_type' for nomore
opening display /address@hidden/Qemu address@hidden ok
copying OF device tree...done
ERROR: OF_property_copy cannot get property 'device_type' for aliases
ERROR: OF_property_copy cannot get property 'device_type' for chosen
ERROR: OF_property_copy cannot get property 'device_type' for packages
ERROR: OF_property_copy cannot get property 'device_type' for cpus
ERROR: OF_property_copy cannot get property 'device_type' for options
ERROR: OF_property_copy cannot get property 'device_type' for rom
ERROR: OF_property_copy cannot get property 'device_type' for boot-rom
ERROR: OF_property_copy cannot get property 'device_type' for pseudo-hid
ERROR: OF_property_copy cannot get property 'device_type' for mmu
ERROR: OF_property_copy cannot get property 'device_type' for isa
ERROR: OF_property_copy cannot get property 'device_type' for rtas
ERROR: OF_property_copy cannot get property 'device_type' for nomore
Initializing fake screen: Qemu VGA
Calling quiesce ...
returning 0x01400000 from prom_init
Segmentation fault
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Qemu-devel] Boot failure in Mandrika 9.1 on qemu-system-ppc,
Noah yan <=