Re: [Qemu-devel] [PATCH] Fix GT64120 PCI IO mapping update

[Aurelien Jarno]

On Sun, Apr 15, 2007 at 03:07:38PM +0200, Stefan Weil wrote:
> Hi,
> 
> here are some more patches for the GT64120 PCI:
> 
> * Fix the device id (byte order was swapped for mips and mipsel).
>   Now lspci shows the correct device name (for any endianess).
> 
> * Fix the byte order for GT64120 PCI configuration (was swapped
>   for mips). Now lspci shows the GT64120 device for big endian, too.
> 
> * Fix the initial value of the CPU configuration register.
>   For big endian machines, it was set to 0x800, but
>   bit 12 is the endian bit, so maybe 0x1000 is better.
>   I see no difference for Linux, so obviously nobody reads
>   this bit value. It should be read by the emulation (currently
>   it is not)...

Good catch!

> There remain several issues even with these patches (little and big endian):
> Malta cannot allocate some PCI address space even for the standard
> configuration. See dpkg.txt and lspci.txt for the error messages.

I don't have such messages in the build log. I am using a 2.6.18 kernel,
whereas you are using a 2.6.20. May that explain the difference? Or
maybe you have enable some debug flags in the kernel?

The problem may be due to the fact YAMON (and probably redboot) 
initializes the GT64120 BAR registers to different values than the
default one. As we are booting the kernel directly, the values are
wrong. The patch below does the same thing as YAMON in the pseudo
bootloader.

Cheers,
Aurelien


Index: hw/mips_malta.c
===================================================================
RCS file: /sources/qemu/qemu/hw/mips_malta.c,v
retrieving revision 1.23
diff -u -d -p -r1.23 mips_malta.c
--- hw/mips_malta.c     7 Apr 2007 18:14:41 -0000       1.23
+++ hw/mips_malta.c     15 Apr 2007 14:40:34 -0000
@@ -548,6 +548,50 @@ static void write_bootloader (CPUState *
     stl_raw(p++, 0x34c60000 | ((ENVP_ADDR + 8) & 0xffff));         /* ori a2, 
a2, low(ENVP_ADDR + 8) */
     stl_raw(p++, 0x3c070000 | (env->ram_size >> 16));              /* lui a3, 
high(env->ram_size) */
     stl_raw(p++, 0x34e70000 | (env->ram_size & 0xffff));           /* ori a3, 
a3, low(env->ram_size) */
+
+    /* Load BAR registers as done by YAMON */
+    stl_raw(p++, 0x3c091be0);                                      /* lui t1, 
0x1be0 */
+
+#ifdef TARGET_WORDS_BIGENDIAN
+    stl_raw(p++, 0x3c08c000);                                      /* lui t0, 
0xc000 */
+#else
+    stl_raw(p++, 0x340800c0);                                      /* ori t0, 
r0, 0x00c0 */
+#endif
+    stl_raw(p++, 0xad280048);                                      /* sw t0, 
0x0048(t1) */
+#ifdef TARGET_WORDS_BIGENDIAN
+    stl_raw(p++, 0x3c084000);                                      /* lui t0, 
0x4000 */
+#else
+    stl_raw(p++, 0x34080040);                                      /* ori t0, 
r0, 0x0040 */
+#endif
+    stl_raw(p++, 0xad280050);                                      /* sw t0, 
0x0050(t1) */
+
+#ifdef TARGET_WORDS_BIGENDIAN
+    stl_raw(p++, 0x3c088000);                                      /* lui t0, 
0x8000 */
+#else
+    stl_raw(p++, 0x34080080);                                      /* ori t0, 
r0, 0x0080 */
+#endif
+    stl_raw(p++, 0xad280058);                                      /* sw t0, 
0x0058(t1) */
+#ifdef TARGET_WORDS_BIGENDIAN
+    stl_raw(p++, 0x3c083f00);                                      /* lui t0, 
0x3f00 */
+#else
+    stl_raw(p++, 0x3408003f);                                      /* ori t0, 
r0, 0x003f */
+#endif
+    stl_raw(p++, 0xad280060);                                      /* sw t0, 
0x0060(t1) */
+
+#ifdef TARGET_WORDS_BIGENDIAN
+    stl_raw(p++, 0x3c08c100);                                      /* lui t0, 
0xc100 */
+#else
+    stl_raw(p++, 0x340800c1);                                      /* ori t0, 
r0, 0x00c1 */
+#endif
+    stl_raw(p++, 0xad280080);                                      /* sw t0, 
0x0080(t1) */
+#ifdef TARGET_WORDS_BIGENDIAN
+    stl_raw(p++, 0x3c085e00);                                      /* lui t0, 
0x5e00 */
+#else
+    stl_raw(p++, 0x3408005e);                                      /* ori t0, 
r0, 0x005e */
+#endif
+    stl_raw(p++, 0xad280088);                                      /* sw t0, 
0x0088(t1) */
+
+    /* Jump to kernel code */
     stl_raw(p++, 0x3c1f0000 | ((kernel_entry >> 16) & 0xffff));    /* lui ra, 
high(kernel_entry) */
     stl_raw(p++, 0x37ff0000 | (kernel_entry & 0xffff));            /* ori ra, 
ra, low(kernel_entry) */
     stl_raw(p++, 0x03e00008);                                      /* jr ra */

-- 
  .''`.  Aurelien Jarno             | GPG: 1024D/F1BCDB73
 : :' :  Debian developer           | Electrical Engineer
 `. `'   address@hidden         | address@hidden
   `-    people.debian.org/~aurel32 | www.aurel32.net