[Qemu-devel] Re: [PATCH 1/5] Fix i386 Host

[consul]

It broke mingw build with gcc-3.4.2

gcc -Wall -O2 -g -fno-strict-aliasing  -fno-reorder-blocks  -fno-gcse    
-fno-optimize-sibling-calls 
  -fno-crossjumping  -fno-align-labels  -fno-align-jumps  -fno-align-functions 
   -mpreferred-stack-boundary=2 -fomit-frame-pointer   -I. -I.. 
-I/c/qemu/target-i386 
 -I/c/qemu -MMD -MP -DNEED_CPU_H -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 
-D_LARGEFILE_SOURCE 
 -I/c/qemu/fpu -DHAS_AUDIO -DHAS_AUDIO_CHOICE -I/c/qemu/slirp -c -o op.o 
/c/qemu/target-i386/op.c
c:/qemu/target-i386/ops_mem.h: In function `op_stw_kernel_T1_A0':
../softmmu_header.h:174: error: can't find a register in class `Q_REGS' 
while reloading `asm'
make[1]: *** [op.o] Error 1
make[1]: Leaving directory `/c/qemu/i386-softmmu'
make: *** [subdir-i386-softmmu] Error 2

Alex.

"Alexander Graf" <address@hidden> wrote in message 
news:address@hidden
> Johannes Schindelin wrote:
>> Hi,
>>
>> On Thu, 17 Jan 2008, Johannes Schindelin wrote:
>>
>>
>>> It fixed it for me, but only after a "make distclean && ./configure &&
>>> make".  Apparently there are still some dependencies which are not
>>> right.
>>>
>>
>> Spoke too soon...  It introduces an extra #endif in target-mips/exec.h
>>
>>
>
> Right, thanks.
>
> New patch attached.
>
> Alex
>


--------------------------------------------------------------------------------


> Index: qemu/softmmu_header.h
> ===================================================================
> --- qemu.orig/softmmu_header.h
> +++ qemu/softmmu_header.h
> @@ -189,9 +189,15 @@ static inline void glue(glue(st, SUFFIX)
> #else
> #error unsupported size
> #endif
> +#ifdef GCC_BREAKS_T_REGISTER
> +                  "pushl %%ecx\n"
> +#endif
>                   "pushl %6\n"
>                   "call %7\n"
>                   "popl %%eax\n"
> +#ifdef GCC_BREAKS_T_REGISTER
> +                  "popl %%ecx\n"
> +#endif
>                   "jmp 2f\n"
>                   "1:\n"
>                   "addl 8(%%edx), %%eax\n"
> @@ -209,14 +215,22 @@ static inline void glue(glue(st, SUFFIX)
>                   : "r" (ptr),
> /* NOTE: 'q' would be needed as constraint, but we could not use it
>    with T1 ! */
> +#if DATA_SIZE == 1 || DATA_SIZE == 2
> +                  "q" (v),
> +#else
>                   "r" (v),
> +#endif
>                   "i" ((CPU_TLB_SIZE - 1) << CPU_TLB_ENTRY_BITS),
>                   "i" (TARGET_PAGE_BITS - CPU_TLB_ENTRY_BITS),
>                   "i" (TARGET_PAGE_MASK | (DATA_SIZE - 1)),
>                   "m" (*(uint32_t *)offsetof(CPUState, 
> tlb_table[CPU_MMU_INDEX][0].addr_write)),
>                   "i" (CPU_MMU_INDEX),
>                   "m" (*(uint8_t *)&glue(glue(__st, SUFFIX), MMUSUFFIX))
> +#ifdef GCC_BREAKS_T_REGISTER
> +                  : "%eax", "%edx", "memory", "cc");
> +#else
>                   : "%eax", "%ecx", "%edx", "memory", "cc");
> +#endif
> }
>
> #else
> Index: qemu/target-alpha/cpu.h
> ===================================================================
> --- qemu.orig/target-alpha/cpu.h
> +++ qemu/target-alpha/cpu.h
> @@ -275,6 +275,8 @@ struct CPUAlphaState {
>      * used to emulate 64 bits target on 32 bits hosts
>      */
>     target_ulong t0, t1, t2;
> +#elif defined(GCC_BREAKS_T_REGISTER)
> +    target_ulong t2;
> #endif
>     /* */
>     double ft0, ft1, ft2;
> Index: qemu/target-alpha/exec.h
> ===================================================================
> --- qemu.orig/target-alpha/exec.h
> +++ qemu/target-alpha/exec.h
> @@ -36,6 +36,12 @@ register struct CPUAlphaState *env asm(A
> #define T1 (env->t1)
> #define T2 (env->t2)
>
> +#elif defined(GCC_BREAKS_T_REGISTER)
> +
> +register uint64_t T0 asm(AREG1);
> +register uint64_t T1 asm(AREG2);
> +#define T2 (env->t2)
> +
> #else
>
> register uint64_t T0 asm(AREG1);
> Index: qemu/target-arm/cpu.h
> ===================================================================
> --- qemu.orig/target-arm/cpu.h
> +++ qemu/target-arm/cpu.h
> @@ -66,6 +66,9 @@ typedef uint32_t ARMReadCPFunc(void *opa
>  */
>
> typedef struct CPUARMState {
> +#if defined(GCC_BREAKS_T_REGISTER)
> +    uint32_t t2;
> +#endif
>     /* Regs for current mode.  */
>     uint32_t regs[16];
>     /* Frequently accessed CPSR bits are stored separately for 
> efficiently.
> Index: qemu/target-arm/exec.h
> ===================================================================
> --- qemu.orig/target-arm/exec.h
> +++ qemu/target-arm/exec.h
> @@ -23,7 +23,12 @@
> register struct CPUARMState *env asm(AREG0);
> register uint32_t T0 asm(AREG1);
> register uint32_t T1 asm(AREG2);
> +#if defined(GCC_BREAKS_T_REGISTER)
> +#define T2 (env->t2)
> +#else
> register uint32_t T2 asm(AREG3);
> +#endif
> +
>
> /* TODO: Put these in FP regs on targets that have such things.  */
> /* It is ok for FT0s and FT0d to overlap.  Likewise FT1s and FT1d.  */
> Index: qemu/target-i386/cpu.h
> ===================================================================
> --- qemu.orig/target-i386/cpu.h
> +++ qemu/target-i386/cpu.h
> @@ -470,6 +470,8 @@ typedef struct CPUX86State {
> #if TARGET_LONG_BITS > HOST_LONG_BITS
>     /* temporaries if we cannot store them in host registers */
>     target_ulong t0, t1, t2;
> +#elif defined(GCC_BREAKS_T_REGISTER)
> +    target_ulong t1;
> #endif
>
>     /* standard registers */
> Index: qemu/target-i386/exec.h
> ===================================================================
> --- qemu.orig/target-i386/exec.h
> +++ qemu/target-i386/exec.h
> @@ -39,6 +39,12 @@ register struct CPUX86State *env asm(ARE
> #define T1 (env->t1)
> #define T2 (env->t2)
>
> +#elif defined(GCC_BREAKS_T_REGISTER)
> +
> +register target_ulong T0 asm(AREG1);
> +#define T1 (env->t1)
> +register target_ulong T2 asm(AREG3);
> +
> #else
>
> /* XXX: use unsigned long instead of target_ulong - better code will
> Index: qemu/target-mips/cpu.h
> ===================================================================
> --- qemu.orig/target-mips/cpu.h
> +++ qemu/target-mips/cpu.h
> @@ -149,6 +149,8 @@ struct CPUMIPSState {
>     target_ulong t0;
>     target_ulong t1;
>     target_ulong t2;
> +#elif defined(GCC_BREAKS_T_REGISTER)
> +    target_ulong t2;
> #endif
>     target_ulong HI[MIPS_DSP_ACC][MIPS_TC_MAX];
>     target_ulong LO[MIPS_DSP_ACC][MIPS_TC_MAX];
> Index: qemu/target-mips/exec.h
> ===================================================================
> --- qemu.orig/target-mips/exec.h
> +++ qemu/target-mips/exec.h
> @@ -14,6 +14,10 @@ register struct CPUMIPSState *env asm(AR
> #define T0 (env->t0)
> #define T1 (env->t1)
> #define T2 (env->t2)
> +#elif defined(GCC_BREAKS_T_REGISTER)
> +register target_ulong T0 asm(AREG1);
> +register target_ulong T1 asm(AREG2);
> +#define T2 (env->t2)
> #else
> register target_ulong T0 asm(AREG1);
> register target_ulong T1 asm(AREG2);
> Index: qemu/target-ppc/exec.h
> ===================================================================
> --- qemu.orig/target-ppc/exec.h
> +++ qemu/target-ppc/exec.h
> @@ -38,10 +38,15 @@ register struct CPUPPCState *env asm(ARE
> #define T1 (env->t1)
> #define T2 (env->t2)
> #define TDX "%016" PRIx64
> +#elif defined(GCC_BREAKS_T_REGISTER)
> +register unsigned long T0 asm(AREG1);
> +register unsigned long T1 asm(AREG2);
> +#define T2 (env->t2)
> #else
> register unsigned long T0 asm(AREG1);
> register unsigned long T1 asm(AREG2);
> register unsigned long T2 asm(AREG3);
> +#endif
> #define TDX "%016lx"
> #endif
> /* We may, sometime, need 64 bits registers on 32 bits targets */
> Index: qemu/target-sparc/exec.h
> ===================================================================
> --- qemu.orig/target-sparc/exec.h
> +++ qemu/target-sparc/exec.h
> @@ -32,9 +32,13 @@ register uint32_t T2 asm(AREG4);
>
> #else
> #define REGWPTR env->regwptr
> +#if !defined(GCC_BREAKS_T_REGISTER)
> register uint32_t T2 asm(AREG3);
> -#endif
> #define reg_T2
> +#else
> +#define T2 (env->t2)
> +#endif
> +#endif
> #endif
>
> #define FT0 (env->ft0)
> Index: qemu/configure
> ===================================================================
> --- qemu.orig/configure
> +++ qemu/configure
> @@ -806,6 +806,12 @@ echo "AIOLIBS=$AIOLIBS" >> $config_mak
> if test "$cpu" = "i386" ; then
>   echo "ARCH=i386" >> $config_mak
>   echo "#define HOST_I386 1" >> $config_h
> +
> +  # add check for gcc4 breakage
> +  echo "#if (__GNUC__ > 3)" >> $config_h
> +  echo "#define GCC_BREAKS_T_REGISTER" >> $config_h
> +  echo "#endif" >> $config_h
> +
> elif test "$cpu" = "x86_64" ; then
>   echo "ARCH=x86_64" >> $config_mak
>   echo "#define HOST_X86_64 1" >> $config_h
>