[Qemu-devel] [4491] N810 keyboard slide open by default, add more comments.

[Andrzej Zaborowski]

Revision: 4491
          http://svn.sv.gnu.org/viewvc/?view=rev&root=qemu&revision=4491
Author:   balrog
Date:     2008-05-18 13:14:29 +0000 (Sun, 18 May 2008)

Log Message:
-----------
N810 keyboard slide open by default, add more comments.

Modified Paths:
--------------
    trunk/hw/nseries.c
    trunk/hw/tsc2005.c

Modified: trunk/hw/nseries.c
===================================================================
--- trunk/hw/nseries.c  2008-05-18 13:01:40 UTC (rev 4490)
+++ trunk/hw/nseries.c  2008-05-18 13:14:29 UTC (rev 4491)
@@ -56,11 +56,13 @@
 #define N8X0_TUSB_ENABLE_GPIO          0
 #define N800_MMC2_WP_GPIO              8
 #define N800_UNKNOWN_GPIO0             9       /* out */
+#define N810_MMC2_VIOSD_GPIO           9
 #define N800_UNKNOWN_GPIO1             10      /* out */
 #define N800_CAM_TURN_GPIO             12
 #define N810_GPS_RESET_GPIO            12
 #define N800_BLIZZARD_POWERDOWN_GPIO   15
 #define N800_MMC1_WP_GPIO              23
+#define N810_MMC2_VSD_GPIO             23
 #define N8X0_ONENAND_GPIO              26
 #define N810_BLIZZARD_RESET_GPIO       30
 #define N800_UNKNOWN_GPIO2             53      /* out */
@@ -799,6 +801,10 @@
     /* CPU setup */
     s->cpu->env->regs[15] = s->cpu->env->boot_info->loader_start;
     s->cpu->env->GE = 0x5;
+
+    /* If the machine has a slided keyboard, open it */
+    if (s->kbd)
+        qemu_irq_raise(omap2_gpio_in_get(s->cpu->gpif, N810_SLIDE_GPIO)[0]);
 }
 
 #define OMAP_TAG_NOKIA_BT      0x4e01
@@ -1057,6 +1063,25 @@
 
     s->cpu = omap2420_mpu_init(sdram_size, NULL, cpu_model);
 
+    /* Setup peripherals
+     *
+     * Believed external peripherals layout in the N810:
+     * (spi bus 1)
+     *   tsc2005
+     *   lcd_mipid
+     * (spi bus 2)
+     *   Conexant cx3110x (WLAN)
+     *   optional: pc2400m (WiMAX)
+     * (i2c bus 0)
+     *   TLV320AIC33 (audio codec)
+     *   TCM825x (camera by Toshiba)
+     *   lp5521 (clever LEDs)
+     *   tsl2563 (light sensor, hwmon, model 7, rev. 0)
+     *   lm8323 (keypad, manf 00, rev 04)
+     * (i2c bus 1)
+     *   tmp105 (temperature sensor, hwmon)
+     *   menelaus (pm)
+     */
     n8x0_gpio_setup(s);
     n8x0_nand_setup(s);
     n8x0_i2c_setup(s);

Modified: trunk/hw/tsc2005.c
===================================================================
--- trunk/hw/tsc2005.c  2008-05-18 13:01:40 UTC (rev 4490)
+++ trunk/hw/tsc2005.c  2008-05-18 13:14:29 UTC (rev 4491)
@@ -197,10 +197,14 @@
 
     case 0xc:  /* CFR0 */
         s->host_mode = data >> 15;
-        s->enabled = !(data & 0x4000);
-        if (s->busy && !s->enabled)
-            qemu_del_timer(s->timer);
-        s->busy &= s->enabled;
+        if (s->enabled != !(data & 0x4000)) {
+            s->enabled = !(data & 0x4000);
+            fprintf(stderr, "%s: touchscreen sense %sabled\n",
+                            __FUNCTION__, s->enabled ? "en" : "dis");
+            if (s->busy && !s->enabled)
+                qemu_del_timer(s->timer);
+            s->busy &= s->enabled;
+        }
         s->nextprecision = (data >> 13) & 1;
         s->timing[0] = data & 0x1fff;
         if ((s->timing[0] >> 11) == 3)