[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [5768] SH4: Use qemu_irq in timer emulation.
From: |
Aurelien Jarno |
Subject: |
[Qemu-devel] [5768] SH4: Use qemu_irq in timer emulation. |
Date: |
Fri, 21 Nov 2008 21:06:43 +0000 |
Revision: 5768
http://svn.sv.gnu.org/viewvc/?view=rev&root=qemu&revision=5768
Author: aurel32
Date: 2008-11-21 21:06:42 +0000 (Fri, 21 Nov 2008)
Log Message:
-----------
SH4: Use qemu_irq in timer emulation.
* hw/sh.h (tmu012_init): Accept qemu_irq, not intc_source.
* hw/sh7750.c (sh7750_init): Pass qemu_irq to tmu012_init.
* hw/sh_intc.c (sh_intc_set_irq): New.
(sh_intc_init): Allocate irqs.
* hw/sh_intc.h (struct intc_desc): New field irqs.
* hw/sh_timer.c (sh_timer_state): Use qemu_irq, not intc_source.
(sh_timer_update): Use qemu_set_irq, not sh_intc_toggle_source.
(sh_timer_init, tmu012_init): Adjust.
(Vladimir Prus)
Modified Paths:
--------------
trunk/hw/sh.h
trunk/hw/sh7750.c
trunk/hw/sh_intc.c
trunk/hw/sh_intc.h
trunk/hw/sh_timer.c
Modified: trunk/hw/sh.h
===================================================================
--- trunk/hw/sh.h 2008-11-21 17:26:23 UTC (rev 5767)
+++ trunk/hw/sh.h 2008-11-21 21:06:42 UTC (rev 5768)
@@ -28,8 +28,8 @@
#define TMU012_FEAT_3CHAN (1 << 1)
#define TMU012_FEAT_EXTCLK (1 << 2)
void tmu012_init(target_phys_addr_t base, int feat, uint32_t freq,
- struct intc_source *ch0_irq, struct intc_source *ch1_irq,
- struct intc_source *ch2_irq0, struct intc_source *ch2_irq1);
+ qemu_irq ch0_irq, qemu_irq ch1_irq,
+ qemu_irq ch2_irq0, qemu_irq ch2_irq1);
/* sh_serial.c */
Modified: trunk/hw/sh7750.c
===================================================================
--- trunk/hw/sh7750.c 2008-11-21 17:26:23 UTC (rev 5767)
+++ trunk/hw/sh7750.c 2008-11-21 21:06:42 UTC (rev 5768)
@@ -678,10 +678,10 @@
tmu012_init(0x1fd80000,
TMU012_FEAT_TOCR | TMU012_FEAT_3CHAN | TMU012_FEAT_EXTCLK,
s->periph_freq,
- sh_intc_source(&s->intc, TMU0),
- sh_intc_source(&s->intc, TMU1),
- sh_intc_source(&s->intc, TMU2_TUNI),
- sh_intc_source(&s->intc, TMU2_TICPI));
+ s->intc.irqs[TMU0],
+ s->intc.irqs[TMU1],
+ s->intc.irqs[TMU2_TUNI],
+ s->intc.irqs[TMU2_TICPI]);
if (cpu->id & (SH_CPU_SH7750 | SH_CPU_SH7750S | SH_CPU_SH7751)) {
sh_intc_register_sources(&s->intc,
@@ -700,8 +700,8 @@
_INTC_ARRAY(vectors_tmu34),
NULL, 0);
tmu012_init(0x1e100000, 0, s->periph_freq,
- sh_intc_source(&s->intc, TMU3),
- sh_intc_source(&s->intc, TMU4),
+ s->intc.irqs[TMU3],
+ s->intc.irqs[TMU4],
NULL, NULL);
}
Modified: trunk/hw/sh_intc.c
===================================================================
--- trunk/hw/sh_intc.c 2008-11-21 17:26:23 UTC (rev 5767)
+++ trunk/hw/sh_intc.c 2008-11-21 21:06:42 UTC (rev 5768)
@@ -73,6 +73,14 @@
}
}
+void sh_intc_set_irq (void *opaque, int n, int level)
+{
+ struct intc_desc *desc = opaque;
+ struct intc_source *source = &(desc->sources[n]);
+
+ sh_intc_toggle_source(source, 0, level ? 1 : -1);
+}
+
int sh_intc_get_pending_vector(struct intc_desc *desc, int imask)
{
unsigned int i;
@@ -428,6 +436,8 @@
source->parent = desc;
}
+
+ desc->irqs = qemu_allocate_irqs(sh_intc_set_irq, desc, nr_sources);
desc->iomemtype = cpu_register_io_memory(0, sh_intc_readfn,
sh_intc_writefn, desc);
Modified: trunk/hw/sh_intc.h
===================================================================
--- trunk/hw/sh_intc.h 2008-11-21 17:26:23 UTC (rev 5767)
+++ trunk/hw/sh_intc.h 2008-11-21 21:06:42 UTC (rev 5768)
@@ -1,6 +1,9 @@
#ifndef __SH_INTC_H__
#define __SH_INTC_H__
+#include "qemu-common.h"
+#include "irq.h"
+
typedef unsigned char intc_enum;
struct intc_vect {
@@ -43,13 +46,13 @@
};
struct intc_desc {
+ qemu_irq *irqs;
struct intc_source *sources;
int nr_sources;
struct intc_mask_reg *mask_regs;
int nr_mask_regs;
struct intc_prio_reg *prio_regs;
int nr_prio_regs;
-
int iomemtype;
int pending; /* number of interrupt sources that has pending set */
};
Modified: trunk/hw/sh_timer.c
===================================================================
--- trunk/hw/sh_timer.c 2008-11-21 17:26:23 UTC (rev 5767)
+++ trunk/hw/sh_timer.c 2008-11-21 21:06:42 UTC (rev 5768)
@@ -36,7 +36,7 @@
int old_level;
int feat;
int enabled;
- struct intc_source *irq;
+ qemu_irq irq;
} sh_timer_state;
/* Check all active timers, and schedule the next timer interrupt. */
@@ -46,7 +46,7 @@
int new_level = s->int_level && (s->tcr & TIMER_TCR_UNIE);
if (new_level != s->old_level)
- sh_intc_toggle_source(s->irq, 0, new_level ? 1 : -1);
+ qemu_set_irq (s->irq, new_level);
s->old_level = s->int_level;
s->int_level = new_level;
@@ -185,7 +185,7 @@
sh_timer_update(s);
}
-static void *sh_timer_init(uint32_t freq, int feat, struct intc_source *irq)
+static void *sh_timer_init(uint32_t freq, int feat, qemu_irq irq)
{
sh_timer_state *s;
QEMUBH *bh;
@@ -307,8 +307,8 @@
};
void tmu012_init(target_phys_addr_t base, int feat, uint32_t freq,
- struct intc_source *ch0_irq, struct intc_source *ch1_irq,
- struct intc_source *ch2_irq0, struct intc_source *ch2_irq1)
+ qemu_irq ch0_irq, qemu_irq ch1_irq,
+ qemu_irq ch2_irq0, qemu_irq ch2_irq1)
{
int iomemtype;
tmu012_state *s;
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Qemu-devel] [5768] SH4: Use qemu_irq in timer emulation.,
Aurelien Jarno <=