qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v2 5/8] qemu:virtio-net: Add promiscuous and all-mul


From: Alex Williamson
Subject: [Qemu-devel] [PATCH v2 5/8] qemu:virtio-net: Add promiscuous and all-multicast mode bits
Date: Tue, 03 Feb 2009 12:29:58 -0700
User-agent: StGIT/0.14.2

Add a new RX_MODE control virtqueue class with commands PROMISC and
ALLMULTI and usage documented in virtio-net.h allowing the guest to
manipulate packet receiving options.  We don't export a feature for
this until we also add the MAC filter table.

Note, for compatibility with older guest drivers we need to default
to promiscuous.

Signed-off-by: Alex Williamson <address@hidden>
---

 hw/virtio-net.c |   48 +++++++++++++++++++++++++++++++++++++++++++++++-
 hw/virtio-net.h |   11 +++++++++++
 2 files changed, 58 insertions(+), 1 deletions(-)

diff --git a/hw/virtio-net.c b/hw/virtio-net.c
index 3378cc2..e8ca80b 100644
--- a/hw/virtio-net.c
+++ b/hw/virtio-net.c
@@ -16,7 +16,7 @@
 #include "qemu-timer.h"
 #include "virtio-net.h"
 
-#define VIRTIO_NET_VM_VERSION    3
+#define VIRTIO_NET_VM_VERSION    4
 
 typedef struct VirtIONet
 {
@@ -30,6 +30,8 @@ typedef struct VirtIONet
     QEMUTimer *tx_timer;
     int tx_timer_active;
     int mergeable_rx_bufs;
+    int promisc;
+    int allmulti;
 } VirtIONet;
 
 /* TODO
@@ -78,6 +80,15 @@ static void virtio_net_set_link_status(VLANClientState *vc)
         virtio_notify_config(&n->vdev);
 }
 
+static void virtio_net_reset(VirtIODevice *vdev)
+{
+    VirtIONet *n = to_virtio_net(vdev);
+
+    /* Reset back to compatibility mode */
+    n->promisc = 1;
+    n->allmulti = 0;
+}
+
 static uint32_t virtio_net_get_features(VirtIODevice *vdev)
 {
     uint32_t features = (1 << VIRTIO_NET_F_MAC) |
@@ -94,8 +105,31 @@ static void virtio_net_set_features(VirtIODevice *vdev, 
uint32_t features)
     n->mergeable_rx_bufs = !!(features & (1 << VIRTIO_NET_F_MRG_RXBUF));
 }
 
+static int virtio_net_handle_rx_mode(VirtIONet *n, uint8_t cmd,
+                                     VirtQueueElement *elem)
+{
+    uint8_t *on;
+
+    if (elem->out_num != 2 || elem->out_sg[1].iov_len != sizeof(*on)) {
+        fprintf(stderr, "virtio-net ctrl invalid rx mode command\n");
+        exit(1);
+    }
+
+    on = elem->out_sg[1].iov_base;
+
+    if (cmd == VIRTIO_NET_CTRL_RX_MODE_PROMISC)
+        n->promisc = *on;
+    else if (cmd == VIRTIO_NET_CTRL_RX_MODE_ALLMULTI)
+        n->allmulti = *on;
+    else
+        return VIRTIO_NET_ERR;
+
+    return VIRTIO_NET_OK;
+}
+
 static void virtio_net_handle_ctrl(VirtIODevice *vdev, VirtQueue *vq)
 {
+    VirtIONet *n = to_virtio_net(vdev);
     struct virtio_net_ctrl_hdr *ctrl;
     virtio_net_ctrl_ack *status;
     VirtQueueElement elem;
@@ -116,6 +150,9 @@ static void virtio_net_handle_ctrl(VirtIODevice *vdev, 
VirtQueue *vq)
         status = elem.in_sg[elem.in_num - 1].iov_base;
         *status = VIRTIO_NET_ERR;
 
+        if (ctrl->class == VIRTIO_NET_CTRL_RX_MODE)
+            *status = virtio_net_handle_rx_mode(n, ctrl->cmd, &elem);
+
         virtqueue_push(vq, &elem, sizeof(*status));
         virtio_notify(vdev, vq);
     }
@@ -338,6 +375,8 @@ static void virtio_net_save(QEMUFile *f, void *opaque)
     qemu_put_be32(f, n->tx_timer_active);
     qemu_put_be32(f, n->mergeable_rx_bufs);
     qemu_put_be16(f, n->status);
+    qemu_put_be32(f, n->promisc);
+    qemu_put_be32(f, n->allmulti);
 }
 
 static int virtio_net_load(QEMUFile *f, void *opaque, int version_id)
@@ -356,6 +395,11 @@ static int virtio_net_load(QEMUFile *f, void *opaque, int 
version_id)
     if (version_id >= 3)
         n->status = qemu_get_be16(f);
 
+    if (version_id >= 4) {
+        n->promisc = qemu_get_be32(f);
+        n->allmulti = qemu_get_be32(f);
+    }
+
     if (n->tx_timer_active) {
         qemu_mod_timer(n->tx_timer,
                        qemu_get_clock(vm_clock) + TX_TIMER_INTERVAL);
@@ -384,6 +428,7 @@ void virtio_net_init(PCIBus *bus, NICInfo *nd, int devfn)
     n->vdev.set_config = virtio_net_set_config;
     n->vdev.get_features = virtio_net_get_features;
     n->vdev.set_features = virtio_net_set_features;
+    n->vdev.reset = virtio_net_reset;
     n->rx_vq = virtio_add_queue(&n->vdev, 256, virtio_net_handle_rx);
     n->tx_vq = virtio_add_queue(&n->vdev, 256, virtio_net_handle_tx);
     n->ctrl_vq = virtio_add_queue(&n->vdev, 16, virtio_net_handle_ctrl);
@@ -398,6 +443,7 @@ void virtio_net_init(PCIBus *bus, NICInfo *nd, int devfn)
     n->tx_timer = qemu_new_timer(vm_clock, virtio_net_tx_timer, n);
     n->tx_timer_active = 0;
     n->mergeable_rx_bufs = 0;
+    n->promisc = 1; /* for compatibility */
 
     register_savevm("virtio-net", virtio_net_id++, VIRTIO_NET_VM_VERSION,
                     virtio_net_save, virtio_net_load, n);
diff --git a/hw/virtio-net.h b/hw/virtio-net.h
index 119e38d..ce8e4b4 100644
--- a/hw/virtio-net.h
+++ b/hw/virtio-net.h
@@ -41,6 +41,7 @@
 #define VIRTIO_NET_F_MRG_RXBUF  15      /* Host can merge receive buffers. */
 #define VIRTIO_NET_F_STATUS     16      /* virtio_net_config.status available 
*/
 #define VIRTIO_NET_F_CTRL_VQ    17      /* Control channel available */
+#define VIRTIO_NET_F_CTRL_RX    18      /* Control channel RX mode support */
 
 #define VIRTIO_NET_S_LINK_UP    1       /* Link is up */
 
@@ -102,4 +103,14 @@ typedef uint8_t virtio_net_ctrl_ack;
 #define VIRTIO_NET_OK     0
 #define VIRTIO_NET_ERR    1
 
+/*
+ * Control the RX mode, ie. promisucous and allmulti.  PROMISC and
+ * ALLMULTI commands require an "out" sg entry containing a 1 byte
+ * state value, zero = disable, non-zero = enable.  These commands
+ * are supported with the VIRTIO_NET_F_CTRL_RX feature.
+ */
+#define VIRTIO_NET_CTRL_RX_MODE    0
+ #define VIRTIO_NET_CTRL_RX_MODE_PROMISC      0
+ #define VIRTIO_NET_CTRL_RX_MODE_ALLMULTI     1
+
 #endif





reply via email to

[Prev in Thread] Current Thread [Next in Thread]