[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH] sh4: r2d fix no ide/net case
From: |
takasi-y |
Subject: |
[Qemu-devel] [PATCH] sh4: r2d fix no ide/net case |
Date: |
Thu, 12 Feb 2009 00:45:37 +0900 (JST) |
Fix invalid access/crash when there is no IDE device or NET device.
Signed-off-by: Takashi YOSHII <address@hidden>
---
Current code doesn't check if IDE and NIC is present.
When no IDE is enabled, it accesses invalid adddress (drives_table[-1]).
When no NIC is enabled, it accesses NULL pointer and is killed by SEGV.
SEGV case is easily be seen like below (by -net none)
$ sh4-softmmu/qemu-system-sh4 -M r2d -kernel kernel.kawa -net none
Segmentation fault
This changes default model of 2nd NIC from ne2k-pci to rtl8139.
2nd NIC on-board really was rtl8139.
If you depends on old behavior use -net option, for example
-net nic -net nic,model=ne2k_pci
makes 2nd NIC to be ne2k_pci.
/yoshii
---
hw/r2d.c | 10 +++++-----
1 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/hw/r2d.c b/hw/r2d.c
index 7dcb723..5360b4b 100644
--- a/hw/r2d.c
+++ b/hw/r2d.c
@@ -224,13 +224,13 @@ static void r2d_init(ram_addr_t ram_size, int
vga_ram_size,
serial_hds[2]);
/* onboard CF (True IDE mode, Master only). */
- mmio_ide_init(0x14001000, 0x1400080c, irq[CF_IDE], 1,
- drives_table[drive_get_index(IF_IDE, 0, 0)].bdrv, NULL);
+ if ((i = drive_get_index(IF_IDE, 0, 0)) != -1)
+ mmio_ide_init(0x14001000, 0x1400080c, irq[CF_IDE], 1,
+ drives_table[i].bdrv, NULL);
/* NIC: rtl8139 on-board, and 2 slots. */
- pci_nic_init(pci, &nd_table[0], 2 << 3, "rtl8139");
- for (i = 1; i < nb_nics; i++)
- pci_nic_init(pci, &nd_table[i], -1, "ne2k_pci");
+ for (i = 0; i < nb_nics; i++)
+ pci_nic_init(pci, &nd_table[i], (i==0)? 2<<3: -1, "rtl8139");
/* Todo: register on board registers */
if (kernel_filename) {
--
1.5.6.3
--
/yoshii
- [Qemu-devel] [PATCH] sh4: r2d fix no ide/net case,
takasi-y <=