[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 6/9] Remove NICInfo from e1000 and mipsnet state
From: |
Mark McLoughlin |
Subject: |
[Qemu-devel] [PATCH 6/9] Remove NICInfo from e1000 and mipsnet state |
Date: |
Wed, 15 Apr 2009 17:29:26 +0100 |
NICInfo isn't used after initialization, so remove it from the driver
state structures.
Signed-off-by: Mark McLoughlin <address@hidden>
---
hw/e1000.c | 4 +---
hw/mipsnet.c | 4 +---
2 files changed, 2 insertions(+), 6 deletions(-)
diff --git a/hw/e1000.c b/hw/e1000.c
index 1644201..2d16774 100644
--- a/hw/e1000.c
+++ b/hw/e1000.c
@@ -75,7 +75,6 @@ enum {
typedef struct E1000State_st {
PCIDevice dev;
VLANClientState *vc;
- NICInfo *nd;
int mmio_index;
uint32_t mac_reg[0x8000];
@@ -1078,7 +1077,6 @@ pci_e1000_init(PCIBus *bus, NICInfo *nd, int devfn)
pci_register_io_region((PCIDevice *)d, 1, IOPORT_SIZE,
PCI_ADDRESS_SPACE_IO, ioport_map);
- d->nd = nd;
memmove(d->eeprom_data, e1000_eeprom_template,
sizeof e1000_eeprom_template);
for (i = 0; i < 3; i++)
@@ -1099,7 +1097,7 @@ pci_e1000_init(PCIBus *bus, NICInfo *nd, int devfn)
e1000_receive, e1000_can_receive, d);
d->vc->link_status_changed = e1000_set_link_status;
- qemu_format_nic_info_str(d->vc, d->nd->macaddr);
+ qemu_format_nic_info_str(d->vc, nd->macaddr);
register_savevm(info_str, -1, 2, nic_save, nic_load, d);
d->dev.unregister = pci_e1000_uninit;
diff --git a/hw/mipsnet.c b/hw/mipsnet.c
index 29bd9b8..415b04e 100644
--- a/hw/mipsnet.c
+++ b/hw/mipsnet.c
@@ -35,7 +35,6 @@ typedef struct MIPSnetState {
uint8_t tx_buffer[MAX_ETH_FRAME_SIZE];
qemu_irq irq;
VLANClientState *vc;
- NICInfo *nd;
} MIPSnetState;
static void mipsnet_reset(MIPSnetState *s)
@@ -248,7 +247,6 @@ void mipsnet_init (int base, qemu_irq irq, NICInfo *nd)
register_ioport_read(base, 36, 4, mipsnet_ioport_read, s);
s->irq = irq;
- s->nd = nd;
if (nd && nd->vlan) {
s->vc = qemu_new_vlan_client(nd->vlan, nd->model, nd->name,
mipsnet_receive, mipsnet_can_receive, s);
@@ -256,7 +254,7 @@ void mipsnet_init (int base, qemu_irq irq, NICInfo *nd)
s->vc = NULL;
}
- qemu_format_nic_info_str(s->vc, s->nd->macaddr);
+ qemu_format_nic_info_str(s->vc, nd->macaddr);
mipsnet_reset(s);
register_savevm("mipsnet", 0, 0, mipsnet_save, mipsnet_load, s);
--
1.6.0.6
- [Qemu-devel] [PATCH 0/9] Misc networking fixes, Mark McLoughlin, 2009/04/15
- [Qemu-devel] [PATCH 1/9] Remove stray GSO code from virtio_net, Mark McLoughlin, 2009/04/15
- [Qemu-devel] [PATCH 2/9] struct iovec is now universally available, Mark McLoughlin, 2009/04/15
- [Qemu-devel] [PATCH 3/9] Fix error handling in net_client_init(), Mark McLoughlin, 2009/04/15
- [Qemu-devel] [PATCH 4/9] Don't fail PCI hotplug if no NIC model is supplied, Mark McLoughlin, 2009/04/15
- [Qemu-devel] [PATCH 5/9] Remove some useless malloc() checking, Mark McLoughlin, 2009/04/15
- [Qemu-devel] [PATCH 6/9] Remove NICInfo from e1000 and mipsnet state,
Mark McLoughlin <=
- [Qemu-devel] [PATCH 7/9] Add unregister_savevm(), Mark McLoughlin, 2009/04/15
- [Qemu-devel] [PATCH 8/9] Use NICInfo::model for eepro100 savevm ID string, Mark McLoughlin, 2009/04/15
- [Qemu-devel] [PATCH 9/9] Introduce VLANClientState::cleanup(), Mark McLoughlin, 2009/04/15
- [Qemu-devel] Re: [PATCH 9/9] Introduce VLANClientState::cleanup(), Jan Kiszka, 2009/04/15
- Re: [Qemu-devel] Re: [PATCH 9/9] Introduce VLANClientState::cleanup(), Marcelo Tosatti, 2009/04/15
- Re: [Qemu-devel] Re: [PATCH 9/9] Introduce VLANClientState::cleanup(), M. Warner Losh, 2009/04/15
- Re: [Qemu-devel] Re: [PATCH 9/9] Introduce VLANClientState::cleanup(), Mark McLoughlin, 2009/04/16
- [Qemu-devel] [PATCH 09/09 v2] Introduce VLANClientState::cleanup(), Mark McLoughlin, 2009/04/16
- [Qemu-devel] [PATCH 10/09] Free VLANClientState using qemu_free(), Mark McLoughlin, 2009/04/16
- Re: [Qemu-devel] Re: [PATCH 9/9] Introduce VLANClientState::cleanup(), Marcelo Tosatti, 2009/04/16