[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 6/7] virtio-net: Add new RX filter controls
From: |
Alex Williamson |
Subject: |
[Qemu-devel] [PATCH 6/7] virtio-net: Add new RX filter controls |
Date: |
Fri, 05 Jun 2009 14:47:18 -0600 |
User-agent: |
StGIT/0.14.2 |
Add a few new RX modes to better control the receive_filter. These
are all fairly obvious features that hardware could provide.
Signed-off-by: Alex Williamson <address@hidden>
---
hw/virtio-net.c | 40 ++++++++++++++++++++++++++++++++++++----
hw/virtio-net.h | 14 ++++++++++----
2 files changed, 46 insertions(+), 8 deletions(-)
diff --git a/hw/virtio-net.c b/hw/virtio-net.c
index 5239cc0..ecb58de 100644
--- a/hw/virtio-net.c
+++ b/hw/virtio-net.c
@@ -16,7 +16,7 @@
#include "qemu-timer.h"
#include "virtio-net.h"
-#define VIRTIO_NET_VM_VERSION 9
+#define VIRTIO_NET_VM_VERSION 10
#define MAC_TABLE_ENTRIES 32
#define MAX_VLAN (1 << 12) /* Per 802.1Q definition */
@@ -35,6 +35,10 @@ typedef struct VirtIONet
int mergeable_rx_bufs;
uint8_t promisc;
uint8_t allmulti;
+ uint8_t alluni;
+ uint8_t nomulti;
+ uint8_t nouni;
+ uint8_t nobcast;
struct {
int in_use;
int first_multi;
@@ -98,6 +102,10 @@ static void virtio_net_reset(VirtIODevice *vdev)
/* Reset back to compatibility mode */
n->promisc = 1;
n->allmulti = 0;
+ n->alluni = 0;
+ n->nomulti = 0;
+ n->nouni = 0;
+ n->nobcast = 0;
/* Flush any MAC and VLAN filter table state */
n->mac_table.in_use = 0;
@@ -114,7 +122,8 @@ static uint32_t virtio_net_get_features(VirtIODevice *vdev)
(1 << VIRTIO_NET_F_STATUS) |
(1 << VIRTIO_NET_F_CTRL_VQ) |
(1 << VIRTIO_NET_F_CTRL_RX) |
- (1 << VIRTIO_NET_F_CTRL_VLAN);
+ (1 << VIRTIO_NET_F_CTRL_VLAN) |
+ (1 << VIRTIO_NET_F_CTRL_RX_EXTRA);
return features;
}
@@ -157,6 +166,14 @@ static int virtio_net_handle_rx_mode(VirtIONet *n, uint8_t
cmd,
n->promisc = on;
else if (cmd == VIRTIO_NET_CTRL_RX_MODE_ALLMULTI)
n->allmulti = on;
+ else if (cmd == VIRTIO_NET_CTRL_RX_MODE_ALLUNI)
+ n->alluni = on;
+ else if (cmd == VIRTIO_NET_CTRL_RX_MODE_NOMULTI)
+ n->nomulti = on;
+ else if (cmd == VIRTIO_NET_CTRL_RX_MODE_NOUNI)
+ n->nouni = on;
+ else if (cmd == VIRTIO_NET_CTRL_RX_MODE_NOBCAST)
+ n->nobcast = on;
else
return VIRTIO_NET_ERR;
@@ -357,7 +374,9 @@ static int receive_filter(VirtIONet *n, const uint8_t *buf,
int size)
if (ptr[0] & 1) { // multicast
if (!memcmp(ptr, bcast, sizeof(bcast))) {
- return 1;
+ return !n->nobcast;
+ } else if (n->nomulti) {
+ return 0;
} else if (n->allmulti || n->mac_table.multi_overflow) {
return 1;
}
@@ -368,7 +387,9 @@ static int receive_filter(VirtIONet *n, const uint8_t *buf,
int size)
}
}
} else { // unicast
- if (n->mac_table.uni_overflow) {
+ if (n->nouni) {
+ return 0;
+ } else if (n->alluni || n->mac_table.uni_overflow) {
return 1;
} else if (!memcmp(ptr, n->mac, ETH_ALEN)) {
return 1;
@@ -549,6 +570,10 @@ static void virtio_net_save(QEMUFile *f, void *opaque)
qemu_put_be32(f, 0); /* vnet-hdr placeholder */
qemu_put_byte(f, n->mac_table.multi_overflow);
qemu_put_byte(f, n->mac_table.uni_overflow);
+ qemu_put_byte(f, n->alluni);
+ qemu_put_byte(f, n->nomulti);
+ qemu_put_byte(f, n->nouni);
+ qemu_put_byte(f, n->nobcast);
}
static int virtio_net_load(QEMUFile *f, void *opaque, int version_id)
@@ -605,6 +630,13 @@ static int virtio_net_load(QEMUFile *f, void *opaque, int
version_id)
n->mac_table.uni_overflow = qemu_get_byte(f);
}
+ if (version_id >= 10) {
+ n->alluni = qemu_get_byte(f);
+ n->nomulti = qemu_get_byte(f);
+ n->nouni = qemu_get_byte(f);
+ n->nobcast = qemu_get_byte(f);
+ }
+
/* Find the first multicast entry in the saved MAC filter */
for (i = 0; i < n->mac_table.in_use; i++) {
if (n->mac_table.macs[i * ETH_ALEN] & 1) {
diff --git a/hw/virtio-net.h b/hw/virtio-net.h
index 390fe10..2085181 100644
--- a/hw/virtio-net.h
+++ b/hw/virtio-net.h
@@ -43,6 +43,7 @@
#define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */
#define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */
#define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */
+#define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */
#define VIRTIO_NET_S_LINK_UP 1 /* Link is up */
@@ -103,14 +104,19 @@ typedef uint8_t virtio_net_ctrl_ack;
#define VIRTIO_NET_ERR 1
/*
- * Control the RX mode, ie. promisucous and allmulti. PROMISC and
- * ALLMULTI commands require an "out" sg entry containing a 1 byte
- * state value, zero = disable, non-zero = enable. These commands
- * are supported with the VIRTIO_NET_F_CTRL_RX feature.
+ * Control the RX mode, ie. promisucous, allmulti, etc...
+ * All commands require an "out" sg entry containing a 1 byte
+ * state value, zero = disable, non-zero = enable. Commands
+ * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
+ * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
*/
#define VIRTIO_NET_CTRL_RX_MODE 0
#define VIRTIO_NET_CTRL_RX_MODE_PROMISC 0
#define VIRTIO_NET_CTRL_RX_MODE_ALLMULTI 1
+ #define VIRTIO_NET_CTRL_RX_MODE_ALLUNI 2
+ #define VIRTIO_NET_CTRL_RX_MODE_NOMULTI 3
+ #define VIRTIO_NET_CTRL_RX_MODE_NOUNI 4
+ #define VIRTIO_NET_CTRL_RX_MODE_NOBCAST 5
/*
* Control the MAC filter table.
- [Qemu-devel] [PATCH 0/7] virtio-net: Filter cleanup/improvements, Alex Williamson, 2009/06/05
- [Qemu-devel] [PATCH 1/7] virtio-net: Add version_id 7 placeholder for vnet header support, Alex Williamson, 2009/06/05
- [Qemu-devel] [PATCH 2/7] virtio-net: Use a byte to store RX mode flags, Alex Williamson, 2009/06/05
- [Qemu-devel] [PATCH 3/7] virtio-net: reorganize receive_filter(), Alex Williamson, 2009/06/05
- [Qemu-devel] [PATCH 4/7] virtio-net: Fix MAC filter overflow handling, Alex Williamson, 2009/06/05
- [Qemu-devel] [PATCH 6/7] virtio-net: Add new RX filter controls,
Alex Williamson <=
- Re: [Qemu-devel] [PATCH 6/7] virtio-net: Add new RX filter controls, Michael S. Tsirkin, 2009/06/06
- Re: [Qemu-devel] [PATCH 6/7] virtio-net: Add new RX filter controls, Alex Williamson, 2009/06/08
- Re: [Qemu-devel] [PATCH 6/7] virtio-net: Add new RX filter controls, Anthony Liguori, 2009/06/08
- Re: [Qemu-devel] [PATCH 6/7] virtio-net: Add new RX filter controls, Daniel P. Berrange, 2009/06/08
- Re: [Qemu-devel] [PATCH 6/7] virtio-net: Add new RX filter controls, Anthony Liguori, 2009/06/08
- Re: [Qemu-devel] [PATCH 6/7] virtio-net: Add new RX filter controls, Daniel P. Berrange, 2009/06/09
- Re: [Qemu-devel] [PATCH 6/7] virtio-net: Add new RX filter controls, Jamie Lokier, 2009/06/09
- [Qemu-devel] Re: [PATCH 6/7] virtio-net: Add new RX filter controls, Jan Kiszka, 2009/06/09
- [Qemu-devel] Re: [PATCH 6/7] virtio-net: Add new RX filter controls, Jamie Lokier, 2009/06/09
- [Qemu-devel] Re: [PATCH 6/7] virtio-net: Add new RX filter controls, Michael S. Tsirkin, 2009/06/10