qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH V9 03/20] acpi: add acpi constants from linux header


From: Isaku Yamahata
Subject: [Qemu-devel] [PATCH V9 03/20] acpi: add acpi constants from linux header files and use them.
Date: Tue, 8 Dec 2009 17:33:22 +0900

add acpi constants from linux header files and
replace the old constants with them.
The acpi constants will be used by other file.

Signed-off-by: Isaku Yamahata <address@hidden>
---
 hw/acpi.c |   56 +++++++++++++++++++------------------------
 hw/acpi.h |   78 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 103 insertions(+), 31 deletions(-)
 create mode 100644 hw/acpi.h

diff --git a/hw/acpi.c b/hw/acpi.c
index b503b16..6aa8598 100644
--- a/hw/acpi.c
+++ b/hw/acpi.c
@@ -25,12 +25,10 @@
 #include "i2c.h"
 #include "smbus.h"
 #include "kvm.h"
+#include "acpi.h"
 
 //#define DEBUG
 
-/* i82731AB (PIIX4) compatible power management function */
-#define PM_FREQ 3579545
-
 #define ACPI_DBG_IO_ADDR  0xb044
 
 typedef struct PIIX4PMState {
@@ -49,17 +47,6 @@ typedef struct PIIX4PMState {
     qemu_irq irq;
 } PIIX4PMState;
 
-#define RSM_STS (1 << 15)
-#define PWRBTN_STS (1 << 8)
-#define RTC_EN (1 << 10)
-#define PWRBTN_EN (1 << 8)
-#define GBL_EN (1 << 5)
-#define TMROF_EN (1 << 0)
-
-#define SCI_EN (1 << 0)
-
-#define SUS_EN (1 << 13)
-
 #define ACPI_ENABLE 0xf1
 #define ACPI_DISABLE 0xf0
 
@@ -68,7 +55,7 @@ static PIIX4PMState *pm_state;
 static uint32_t get_pmtmr(PIIX4PMState *s)
 {
     uint32_t d;
-    d = muldiv64(qemu_get_clock(vm_clock), PM_FREQ, get_ticks_per_sec());
+    d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY, 
get_ticks_per_sec());
     return d & 0xffffff;
 }
 
@@ -77,9 +64,10 @@ static int get_pmsts(PIIX4PMState *s)
     int64_t d;
     int pmsts;
     pmsts = s->pmsts;
-    d = muldiv64(qemu_get_clock(vm_clock), PM_FREQ, get_ticks_per_sec());
+    d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY,
+                 get_ticks_per_sec());
     if (d >= s->tmr_overflow_time)
-        s->pmsts |= TMROF_EN;
+        s->pmsts |= ACPI_BITMASK_TIMER_STATUS;
     return s->pmsts;
 }
 
@@ -90,11 +78,16 @@ static void pm_update_sci(PIIX4PMState *s)
 
     pmsts = get_pmsts(s);
     sci_level = (((pmsts & s->pmen) &
-                  (RTC_EN | PWRBTN_EN | GBL_EN | TMROF_EN)) != 0);
+                  (ACPI_BITMASK_RT_CLOCK_ENABLE |
+                   ACPI_BITMASK_POWER_BUTTON_ENABLE |
+                   ACPI_BITMASK_GLOBAL_LOCK_ENABLE |
+                   ACPI_BITMASK_TIMER_ENABLE)) != 0);
     qemu_set_irq(s->irq, sci_level);
     /* schedule a timer interruption if needed */
-    if ((s->pmen & TMROF_EN) && !(pmsts & TMROF_EN)) {
-        expire_time = muldiv64(s->tmr_overflow_time, get_ticks_per_sec(), 
PM_FREQ);
+    if ((s->pmen & ACPI_BITMASK_TIMER_ENABLE) &&
+        !(pmsts & ACPI_BITMASK_TIMER_STATUS)) {
+        expire_time = muldiv64(s->tmr_overflow_time, get_ticks_per_sec(),
+                               PM_TIMER_FREQUENCY);
         qemu_mod_timer(s->tmr_timer, expire_time);
     } else {
         qemu_del_timer(s->tmr_timer);
@@ -117,9 +110,9 @@ static void pm_ioport_writew(void *opaque, uint32_t addr, 
uint32_t val)
             int64_t d;
             int pmsts;
             pmsts = get_pmsts(s);
-            if (pmsts & val & TMROF_EN) {
+            if (pmsts & val & ACPI_BITMASK_TIMER_STATUS) {
                 /* if TMRSTS is reset, then compute the new overflow time */
-                d = muldiv64(qemu_get_clock(vm_clock), PM_FREQ,
+                d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY,
                              get_ticks_per_sec());
                 s->tmr_overflow_time = (d + 0x800000LL) & ~0x7fffffLL;
             }
@@ -134,8 +127,8 @@ static void pm_ioport_writew(void *opaque, uint32_t addr, 
uint32_t val)
     case 0x04:
         {
             int sus_typ;
-            s->pmcntrl = val & ~(SUS_EN);
-            if (val & SUS_EN) {
+            s->pmcntrl = val & ~(ACPI_BITMASK_SLEEP_ENABLE);
+            if (val & ACPI_BITMASK_SLEEP_ENABLE) {
                 /* change suspend type */
                 sus_typ = (val >> 10) & 7;
                 switch(sus_typ) {
@@ -143,9 +136,10 @@ static void pm_ioport_writew(void *opaque, uint32_t addr, 
uint32_t val)
                     qemu_system_shutdown_request();
                     break;
                 case 1:
-                    /* RSM_STS should be set on resume. Pretend that resume
-                       was caused by power button */
-                    s->pmsts |= (RSM_STS | PWRBTN_STS);
+                    /* ACPI_BITMASK_WAKE_STATUS should be set on resume.
+                       Pretend that resume was caused by power button */
+                    s->pmsts |= (ACPI_BITMASK_WAKE_STATUS |
+                                 ACPI_BITMASK_POWER_BUTTON_STATUS);
                     qemu_system_reset_request();
 #if defined(TARGET_I386)
                     cmos_set_s3_resume();
@@ -225,9 +219,9 @@ static void apm_ctrl_changed(uint32_t val, void *arg)
 
     /* ACPI specs 3.0, 4.7.2.5 */
     if (val == ACPI_ENABLE) {
-        s->pmcntrl |= SCI_EN;
+        s->pmcntrl |= ACPI_BITMASK_SCI_ENABLE;
     } else if (val == ACPI_DISABLE) {
-        s->pmcntrl &= ~SCI_EN;
+        s->pmcntrl &= ~ACPI_BITMASK_SCI_ENABLE;
     }
 
     if (s->dev.config[0x5b] & (1 << 1)) {
@@ -318,8 +312,8 @@ static void piix4_powerdown(void *opaque, int irq, int 
power_failing)
 
     if (!s) {
         qemu_system_shutdown_request();
-    } else if (s->pmen & PWRBTN_EN) {
-        s->pmsts |= PWRBTN_EN;
+    } else if (s->pmen & ACPI_BITMASK_POWER_BUTTON_ENABLE) {
+        s->pmsts |= ACPI_BITMASK_POWER_BUTTON_STATUS;
         pm_update_sci(s);
     }
 #endif
diff --git a/hw/acpi.h b/hw/acpi.h
new file mode 100644
index 0000000..51b56b6
--- /dev/null
+++ b/hw/acpi.h
@@ -0,0 +1,78 @@
+#ifndef QEMU_HW_ACPI_H
+#define QEMU_HW_ACPI_H
+/*
+ *  Copyright (c) 2009 Isaku Yamahata <yamahata at valinux co jp>
+ *                     VA Linux Systems Japan K.K.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston MA  02110-1301 USA
+ */
+
+/* from linux include/acpi/actype.h */
+/* Default ACPI register widths */
+
+#define ACPI_GPE_REGISTER_WIDTH         8
+#define ACPI_PM1_REGISTER_WIDTH         16
+#define ACPI_PM2_REGISTER_WIDTH         8
+#define ACPI_PM_TIMER_WIDTH             32
+
+/* PM Timer ticks per second (HZ) */
+#define PM_TIMER_FREQUENCY  3579545
+
+
+/* ACPI fixed hardware registers */
+
+/* from linux/drivers/acpi/acpica/aclocal.h */
+/* Masks used to access the bit_registers */
+
+/* PM1x_STS */
+#define ACPI_BITMASK_TIMER_STATUS               0x0001
+#define ACPI_BITMASK_BUS_MASTER_STATUS          0x0010
+#define ACPI_BITMASK_GLOBAL_LOCK_STATUS         0x0020
+#define ACPI_BITMASK_POWER_BUTTON_STATUS        0x0100
+#define ACPI_BITMASK_SLEEP_BUTTON_STATUS        0x0200
+#define ACPI_BITMASK_RT_CLOCK_STATUS            0x0400
+#define ACPI_BITMASK_PCIEXP_WAKE_STATUS         0x4000 /* ACPI 3.0 */
+#define ACPI_BITMASK_WAKE_STATUS                0x8000
+
+#define ACPI_BITMASK_ALL_FIXED_STATUS           (\
+       ACPI_BITMASK_TIMER_STATUS          | \
+       ACPI_BITMASK_BUS_MASTER_STATUS     | \
+       ACPI_BITMASK_GLOBAL_LOCK_STATUS    | \
+       ACPI_BITMASK_POWER_BUTTON_STATUS   | \
+       ACPI_BITMASK_SLEEP_BUTTON_STATUS   | \
+       ACPI_BITMASK_RT_CLOCK_STATUS       | \
+       ACPI_BITMASK_WAKE_STATUS)
+
+/* PM1x_EN */
+#define ACPI_BITMASK_TIMER_ENABLE               0x0001
+#define ACPI_BITMASK_GLOBAL_LOCK_ENABLE         0x0020
+#define ACPI_BITMASK_POWER_BUTTON_ENABLE        0x0100
+#define ACPI_BITMASK_SLEEP_BUTTON_ENABLE        0x0200
+#define ACPI_BITMASK_RT_CLOCK_ENABLE            0x0400
+#define ACPI_BITMASK_PCIEXP_WAKE_DISABLE        0x4000 /* ACPI 3.0 */
+
+/* PM1x_CNT */
+#define ACPI_BITMASK_SCI_ENABLE                 0x0001
+#define ACPI_BITMASK_BUS_MASTER_RLD             0x0002
+#define ACPI_BITMASK_GLOBAL_LOCK_RELEASE        0x0004
+#define ACPI_BITMASK_SLEEP_TYPE                 0x1C00
+#define ACPI_BITMASK_SLEEP_ENABLE               0x2000
+
+/* PM2_CNT */
+#define ACPI_BITMASK_ARB_DISABLE                0x0001
+
+/* PM_TMR */
+
+#endif /* !QEMU_HW_ACPI_H */
-- 
1.6.5.4





reply via email to

[Prev in Thread] Current Thread [Next in Thread]