[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 16/50] error: Replace qemu_error() by error_report()
|
From: |
Markus Armbruster |
|
Subject: |
[Qemu-devel] [PATCH 16/50] error: Replace qemu_error() by error_report() |
|
Date: |
Thu, 4 Mar 2010 16:56:37 +0100 |
error_report() terminates the message with a newline. Strip it it
from its arguments.
This fixes a few error messages lacking a newline:
net_handle_fd_param()'s "No file descriptor named %s found", and
tap_open()'s "vnet_hdr=1 requested, but no kernel support for
IFF_VNET_HDR available" (all three versions).
There's one place that passes arguments without newlines
intentionally: load_vmstate(). Fix it up.
Signed-off-by: Markus Armbruster <address@hidden>
---
hw/pc.c | 6 +++---
hw/pci-hotplug.c | 2 +-
hw/pci.c | 14 +++++++-------
hw/qdev.c | 42 +++++++++++++++++++++---------------------
hw/scsi-bus.c | 2 +-
hw/scsi-disk.c | 2 +-
hw/scsi-generic.c | 8 ++++----
hw/usb-bus.c | 4 ++--
hw/usb-msd.c | 2 +-
hw/usb-serial.c | 8 ++++----
hw/virtio-net.c | 4 ++--
hw/virtio-pci.c | 2 +-
hw/virtio-serial-bus.c | 2 +-
net.c | 28 ++++++++++++++--------------
net/dump.c | 4 ++--
net/slirp.c | 28 ++++++++++++++--------------
net/socket.c | 10 +++++-----
net/tap-bsd.c | 7 ++++---
net/tap-linux.c | 8 ++++----
net/tap-solaris.c | 4 ++--
net/tap-win32.c | 2 +-
net/tap.c | 2 +-
qemu-config.c | 10 +++++-----
qemu-error.c | 8 +++++++-
qemu-error.h | 2 +-
qemu-tool.c | 2 +-
qerror.c | 4 ++--
savevm.c | 23 ++++++++++++-----------
vl.c | 4 ++--
29 files changed, 126 insertions(+), 118 deletions(-)
diff --git a/hw/pc.c b/hw/pc.c
index 1595283..70acb74 100644
--- a/hw/pc.c
+++ b/hw/pc.c
@@ -238,14 +238,14 @@ static int set_boot_dev(RTCState *s, const char
*boot_device, int fd_bootchk)
nbds = strlen(boot_device);
if (nbds > PC_MAX_BOOT_DEVICES) {
- qemu_error("Too many boot devices for PC\n");
+ error_report("Too many boot devices for PC");
return(1);
}
for (i = 0; i < nbds; i++) {
bds[i] = boot_device2nibble(boot_device[i]);
if (bds[i] == 0) {
- qemu_error("Invalid boot device for PC: '%c'\n",
- boot_device[i]);
+ error_report("Invalid boot device for PC: '%c'",
+ boot_device[i]);
return(1);
}
}
diff --git a/hw/pci-hotplug.c b/hw/pci-hotplug.c
index 41c243c..d608a85 100644
--- a/hw/pci-hotplug.c
+++ b/hw/pci-hotplug.c
@@ -81,7 +81,7 @@ static int scsi_hot_add(Monitor *mon, DeviceState *adapter,
scsibus = DO_UPCAST(SCSIBus, qbus, QLIST_FIRST(&adapter->child_bus));
if (!scsibus || strcmp(scsibus->qbus.info->name, "SCSI") != 0) {
- qemu_error("Device is not a SCSI adapter\n");
+ error_report("Device is not a SCSI adapter");
return -1;
}
diff --git a/hw/pci.c b/hw/pci.c
index eb2043e..0dbca17 100644
--- a/hw/pci.c
+++ b/hw/pci.c
@@ -589,12 +589,12 @@ static PCIDevice *do_pci_register_device(PCIDevice
*pci_dev, PCIBus *bus,
if (!bus->devices[devfn])
goto found;
}
- qemu_error("PCI: no devfn available for %s, all in use\n", name);
+ error_report("PCI: no devfn available for %s, all in use", name);
return NULL;
found: ;
} else if (bus->devices[devfn]) {
- qemu_error("PCI: devfn %d not available for %s, in use by %s\n", devfn,
- name, bus->devices[devfn]->name);
+ error_report("PCI: devfn %d not available for %s, in use by %s",
+ devfn, name, bus->devices[devfn]->name);
return NULL;
}
pci_dev->bus = bus;
@@ -1476,8 +1476,8 @@ PCIDevice *pci_nic_init(NICInfo *nd, const char
*default_model,
bus = pci_get_bus_devfn(&devfn, devaddr);
if (!bus) {
- qemu_error("Invalid PCI device address %s for device %s\n",
- devaddr, pci_nic_names[i]);
+ error_report("Invalid PCI device address %s for device %s",
+ devaddr, pci_nic_names[i]);
return NULL;
}
@@ -1768,8 +1768,8 @@ static int pci_add_option_rom(PCIDevice *pdev)
size = get_image_size(path);
if (size < 0) {
- qemu_error("%s: failed to find romfile \"%s\"\n", __FUNCTION__,
- pdev->romfile);
+ error_report("%s: failed to find romfile \"%s\"",
+ __FUNCTION__, pdev->romfile);
return -1;
}
if (size & (size - 1)) {
diff --git a/hw/qdev.c b/hw/qdev.c
index 253b992..f170ea0 100644
--- a/hw/qdev.c
+++ b/hw/qdev.c
@@ -139,8 +139,8 @@ static int set_property(const char *name, const char
*value, void *opaque)
return 0;
if (qdev_prop_parse(dev, name, value) == -1) {
- qemu_error("can't set property \"%s\" to \"%s\" for \"%s\"\n",
- name, value, dev->info->name);
+ error_report("can't set property \"%s\" to \"%s\" for \"%s\"",
+ name, value, dev->info->name);
return -1;
}
return 0;
@@ -184,7 +184,7 @@ DeviceState *qdev_device_add(QemuOpts *opts)
driver = qemu_opt_get(opts, "driver");
if (!driver) {
- qemu_error("-device: no driver specified\n");
+ error_report("-device: no driver specified");
return NULL;
}
@@ -195,8 +195,8 @@ DeviceState *qdev_device_add(QemuOpts *opts)
return NULL;
}
if (info->no_user) {
- qemu_error("device \"%s\" can't be added via command line\n",
- info->name);
+ error_report("device \"%s\" can't be added via command line",
+ info->name);
return NULL;
}
@@ -208,13 +208,13 @@ DeviceState *qdev_device_add(QemuOpts *opts)
bus = qbus_find_recursive(main_system_bus, NULL, info->bus_info);
}
if (!bus) {
- qemu_error("Did not find %s bus for %s\n",
- path ? path : info->bus_info->name, info->name);
+ error_report("Did not find %s bus for %s",
+ path ? path : info->bus_info->name, info->name);
return NULL;
}
if (qdev_hotplug && !bus->allow_hotplug) {
- qemu_error("Bus %s does not support hotplugging\n",
- bus->name);
+ error_report("Bus %s does not support hotplugging",
+ bus->name);
return NULL;
}
@@ -229,7 +229,7 @@ DeviceState *qdev_device_add(QemuOpts *opts)
return NULL;
}
if (qdev_init(qdev) < 0) {
- qemu_error("Error initializing device %s\n", driver);
+ error_report("Error initializing device %s", driver);
return NULL;
}
qdev->opts = opts;
@@ -268,8 +268,8 @@ int qdev_init(DeviceState *dev)
int qdev_unplug(DeviceState *dev)
{
if (!dev->parent_bus->allow_hotplug) {
- qemu_error("Bus %s does not support hotplugging\n",
- dev->parent_bus->name);
+ error_report("Bus %s does not support hotplugging",
+ dev->parent_bus->name);
return -1;
}
assert(dev->info->unplug != NULL);
@@ -538,12 +538,12 @@ static BusState *qbus_find(const char *path)
pos = 0;
} else {
if (sscanf(path, "%127[^/]%n", elem, &len) != 1) {
- qemu_error("path parse error (\"%s\")\n", path);
+ error_report("path parse error (\"%s\")", path);
return NULL;
}
bus = qbus_find_recursive(main_system_bus, elem, NULL);
if (!bus) {
- qemu_error("bus \"%s\" not found\n", elem);
+ error_report("bus \"%s\" not found", elem);
return NULL;
}
pos = len;
@@ -557,13 +557,13 @@ static BusState *qbus_find(const char *path)
/* find device */
if (sscanf(path+pos, "/%127[^/]%n", elem, &len) != 1) {
- qemu_error("path parse error (\"%s\" pos %d)\n", path, pos);
+ error_report("path parse error (\"%s\" pos %d)", path, pos);
return NULL;
}
pos += len;
dev = qbus_find_dev(bus, elem);
if (!dev) {
- qemu_error("device \"%s\" not found\n", elem);
+ error_report("device \"%s\" not found", elem);
qbus_list_dev(bus);
return NULL;
}
@@ -572,12 +572,12 @@ static BusState *qbus_find(const char *path)
* one child bus accept it nevertheless */
switch (dev->num_child_bus) {
case 0:
- qemu_error("device has no child bus (%s)\n", path);
+ error_report("device has no child bus (%s)", path);
return NULL;
case 1:
return QLIST_FIRST(&dev->child_bus);
default:
- qemu_error("device has multiple child busses (%s)\n", path);
+ error_report("device has multiple child busses (%s)", path);
qbus_list_bus(dev);
return NULL;
}
@@ -585,13 +585,13 @@ static BusState *qbus_find(const char *path)
/* find bus */
if (sscanf(path+pos, "/%127[^/]%n", elem, &len) != 1) {
- qemu_error("path parse error (\"%s\" pos %d)\n", path, pos);
+ error_report("path parse error (\"%s\" pos %d)", path, pos);
return NULL;
}
pos += len;
bus = qbus_find_bus(dev, elem);
if (!bus) {
- qemu_error("child bus \"%s\" not found\n", elem);
+ error_report("child bus \"%s\" not found", elem);
qbus_list_bus(dev);
return NULL;
}
@@ -749,7 +749,7 @@ void do_device_del(Monitor *mon, const QDict *qdict)
dev = qdev_find_recursive(main_system_bus, id);
if (NULL == dev) {
- qemu_error("Device '%s' not found\n", id);
+ error_report("Device '%s' not found", id);
return;
}
qdev_unplug(dev);
diff --git a/hw/scsi-bus.c b/hw/scsi-bus.c
index c41ce9b..383240b 100644
--- a/hw/scsi-bus.c
+++ b/hw/scsi-bus.c
@@ -41,7 +41,7 @@ static int scsi_qdev_init(DeviceState *qdev, DeviceInfo *base)
}
}
if (dev->id >= bus->ndev) {
- qemu_error("bad scsi device id: %d\n", dev->id);
+ error_report("bad scsi device id: %d", dev->id);
goto err;
}
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index b1424de..3671589 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -1021,7 +1021,7 @@ static int scsi_disk_initfn(SCSIDevice *dev)
uint64_t nb_sectors;
if (!s->qdev.conf.dinfo || !s->qdev.conf.dinfo->bdrv) {
- qemu_error("scsi-disk: drive property not set\n");
+ error_report("scsi-disk: drive property not set");
return -1;
}
s->bs = s->qdev.conf.dinfo->bdrv;
diff --git a/hw/scsi-generic.c b/hw/scsi-generic.c
index cfd9903..c9aa853 100644
--- a/hw/scsi-generic.c
+++ b/hw/scsi-generic.c
@@ -464,27 +464,27 @@ static int scsi_generic_initfn(SCSIDevice *dev)
struct sg_scsi_id scsiid;
if (!s->qdev.conf.dinfo || !s->qdev.conf.dinfo->bdrv) {
- qemu_error("scsi-generic: drive property not set\n");
+ error_report("scsi-generic: drive property not set");
return -1;
}
s->bs = s->qdev.conf.dinfo->bdrv;
/* check we are really using a /dev/sg* file */
if (!bdrv_is_sg(s->bs)) {
- qemu_error("scsi-generic: not /dev/sg*\n");
+ error_report("scsi-generic: not /dev/sg*");
return -1;
}
/* check we are using a driver managing SG_IO (version 3 and after */
if (bdrv_ioctl(s->bs, SG_GET_VERSION_NUM, &sg_version) < 0 ||
sg_version < 30000) {
- qemu_error("scsi-generic: scsi generic interface too old\n");
+ error_report("scsi-generic: scsi generic interface too old");
return -1;
}
/* get LUN of the /dev/sg? */
if (bdrv_ioctl(s->bs, SG_GET_SCSI_ID, &scsiid)) {
- qemu_error("scsi-generic: SG_GET_SCSI_ID ioctl failed\n");
+ error_report("scsi-generic: SG_GET_SCSI_ID ioctl failed");
return -1;
}
diff --git a/hw/usb-bus.c b/hw/usb-bus.c
index 7c82314..e2d87f2 100644
--- a/hw/usb-bus.c
+++ b/hw/usb-bus.c
@@ -291,14 +291,14 @@ USBDevice *usbdevice_create(const char *cmdline)
if (info == NULL) {
#if 0
/* no error because some drivers are not converted (yet) */
- qemu_error("usbdevice %s not found\n", driver);
+ error_report("usbdevice %s not found", driver);
#endif
return NULL;
}
if (!usb->usbdevice_init) {
if (params) {
- qemu_error("usbdevice %s accepts no params\n", driver);
+ error_report("usbdevice %s accepts no params", driver);
return NULL;
}
return usb_create_simple(bus, usb->qdev.name);
diff --git a/hw/usb-msd.c b/hw/usb-msd.c
index 0afb031..e90a47e 100644
--- a/hw/usb-msd.c
+++ b/hw/usb-msd.c
@@ -524,7 +524,7 @@ static int usb_msd_initfn(USBDevice *dev)
MSDState *s = DO_UPCAST(MSDState, dev, dev);
if (!s->conf.dinfo || !s->conf.dinfo->bdrv) {
- qemu_error("usb-msd: drive property not set\n");
+ error_report("usb-msd: drive property not set");
return -1;
}
diff --git a/hw/usb-serial.c b/hw/usb-serial.c
index 6db9446..69f0e44 100644
--- a/hw/usb-serial.c
+++ b/hw/usb-serial.c
@@ -565,26 +565,26 @@ static USBDevice *usb_serial_init(const char *filename)
if (strstart(filename, "vendorid=", &p)) {
vendorid = strtol(p, &e, 16);
if (e == p || (*e && *e != ',' && *e != ':')) {
- qemu_error("bogus vendor ID %s\n", p);
+ error_report("bogus vendor ID %s", p);
return NULL;
}
filename = e;
} else if (strstart(filename, "productid=", &p)) {
productid = strtol(p, &e, 16);
if (e == p || (*e && *e != ',' && *e != ':')) {
- qemu_error("bogus product ID %s\n", p);
+ error_report("bogus product ID %s", p);
return NULL;
}
filename = e;
} else {
- qemu_error("unrecognized serial USB option %s\n", filename);
+ error_report("unrecognized serial USB option %s", filename);
return NULL;
}
while(*filename == ',')
filename++;
}
if (!*filename) {
- qemu_error("character device specification needed\n");
+ error_report("character device specification needed");
return NULL;
}
filename++;
diff --git a/hw/virtio-net.c b/hw/virtio-net.c
index 8359be6..be33c68 100644
--- a/hw/virtio-net.c
+++ b/hw/virtio-net.c
@@ -765,7 +765,7 @@ static int virtio_net_load(QEMUFile *f, void *opaque, int
version_id)
if (version_id >= 7) {
if (qemu_get_be32(f) && !peer_has_vnet_hdr(n)) {
- qemu_error("virtio-net: saved image requires vnet_hdr=on\n");
+ error_report("virtio-net: saved image requires vnet_hdr=on");
return -1;
}
@@ -794,7 +794,7 @@ static int virtio_net_load(QEMUFile *f, void *opaque, int
version_id)
if (version_id >= 11) {
if (qemu_get_byte(f) && !peer_has_ufo(n)) {
- qemu_error("virtio-net: saved image requires TUN_F_UFO support\n");
+ error_report("virtio-net: saved image requires TUN_F_UFO support");
return -1;
}
}
diff --git a/hw/virtio-pci.c b/hw/virtio-pci.c
index 7781328..919ce2b 100644
--- a/hw/virtio-pci.c
+++ b/hw/virtio-pci.c
@@ -459,7 +459,7 @@ static int virtio_blk_init_pci(PCIDevice *pci_dev)
proxy->class_code = PCI_CLASS_STORAGE_SCSI;
if (!proxy->block.dinfo) {
- qemu_error("virtio-blk-pci: drive property not set\n");
+ error_report("virtio-blk-pci: drive property not set");
return -1;
}
vdev = virtio_blk_init(&pci_dev->qdev, &proxy->block);
diff --git a/hw/virtio-serial-bus.c b/hw/virtio-serial-bus.c
index d0e0219..17c1ec1 100644
--- a/hw/virtio-serial-bus.c
+++ b/hw/virtio-serial-bus.c
@@ -485,7 +485,7 @@ static int virtser_port_qdev_init(DeviceState *qdev,
DeviceInfo *base)
plugging_port0 = port->is_console && !find_port_by_id(port->vser, 0);
if (port->vser->config.nr_ports == bus->max_nr_ports && !plugging_port0) {
- qemu_error("virtio-serial-bus: Maximum device limit reached\n");
+ error_report("virtio-serial-bus: Maximum device limit reached");
return -1;
}
dev->info = info;
diff --git a/net.c b/net.c
index a1bf49f..503af26 100644
--- a/net.c
+++ b/net.c
@@ -731,7 +731,7 @@ int qemu_find_nic_model(NICInfo *nd, const char * const
*models,
return i;
}
- qemu_error("qemu: Unsupported NIC model: %s\n", nd->model);
+ error_report("qemu: Unsupported NIC model: %s", nd->model);
return -1;
}
@@ -742,7 +742,7 @@ int net_handle_fd_param(Monitor *mon, const char *param)
fd = monitor_get_fd(mon, param);
if (fd == -1) {
- qemu_error("No file descriptor named %s found", param);
+ error_report("No file descriptor named %s found", param);
return -1;
}
@@ -763,7 +763,7 @@ static int net_init_nic(QemuOpts *opts,
idx = nic_get_free_idx();
if (idx == -1 || nb_nics >= MAX_NICS) {
- qemu_error("Too Many NICs\n");
+ error_report("Too Many NICs");
return -1;
}
@@ -774,7 +774,7 @@ static int net_init_nic(QemuOpts *opts,
if ((netdev = qemu_opt_get(opts, "netdev"))) {
nd->netdev = qemu_find_netdev(netdev);
if (!nd->netdev) {
- qemu_error("netdev '%s' not found\n", netdev);
+ error_report("netdev '%s' not found", netdev);
return -1;
}
} else {
@@ -800,14 +800,14 @@ static int net_init_nic(QemuOpts *opts,
if (qemu_opt_get(opts, "macaddr") &&
net_parse_macaddr(nd->macaddr, qemu_opt_get(opts, "macaddr")) < 0) {
- qemu_error("invalid syntax for ethernet address\n");
+ error_report("invalid syntax for ethernet address");
return -1;
}
nd->nvectors = qemu_opt_get_number(opts, "vectors",
NIC_NVECTORS_UNSPECIFIED);
if (nd->nvectors != NIC_NVECTORS_UNSPECIFIED &&
(nd->nvectors < 0 || nd->nvectors > 0x7ffffff)) {
- qemu_error("invalid # of vectors: %d\n", nd->nvectors);
+ error_report("invalid # of vectors: %d", nd->nvectors);
return -1;
}
@@ -1057,12 +1057,12 @@ int net_client_init(Monitor *mon, QemuOpts *opts, int
is_netdev)
if (!is_netdev) {
if (!type) {
- qemu_error("No type specified for -net\n");
+ error_report("No type specified for -net");
return -1;
}
} else {
if (!type) {
- qemu_error("No type specified for -netdev\n");
+ error_report("No type specified for -netdev");
return -1;
}
@@ -1074,21 +1074,21 @@ int net_client_init(Monitor *mon, QemuOpts *opts, int
is_netdev)
strcmp(type, "vde") != 0 &&
#endif
strcmp(type, "socket") != 0) {
- qemu_error("The '%s' network backend type is not valid with
-netdev\n",
- type);
+ error_report("The '%s' network backend type is not valid with
-netdev",
+ type);
return -1;
}
if (qemu_opt_get(opts, "vlan")) {
- qemu_error("The 'vlan' parameter is not valid with -netdev\n");
+ error_report("The 'vlan' parameter is not valid with -netdev");
return -1;
}
if (qemu_opt_get(opts, "name")) {
- qemu_error("The 'name' parameter is not valid with -netdev\n");
+ error_report("The 'name' parameter is not valid with -netdev");
return -1;
}
if (!qemu_opts_id(opts)) {
- qemu_error("The id= parameter is required with -netdev\n");
+ error_report("The id= parameter is required with -netdev");
return -1;
}
}
@@ -1121,7 +1121,7 @@ int net_client_init(Monitor *mon, QemuOpts *opts, int
is_netdev)
}
}
- qemu_error("Invalid -net type '%s'\n", type);
+ error_report("Invalid -net type '%s'", type);
return -1;
}
diff --git a/net/dump.c b/net/dump.c
index e702830..6db7ecf 100644
--- a/net/dump.c
+++ b/net/dump.c
@@ -108,7 +108,7 @@ static int net_dump_init(VLANState *vlan, const char
*device,
fd = open(filename, O_CREAT | O_WRONLY | O_BINARY, 0644);
if (fd < 0) {
- qemu_error("-net dump: can't open %s\n", filename);
+ error_report("-net dump: can't open %s", filename);
return -1;
}
@@ -121,7 +121,7 @@ static int net_dump_init(VLANState *vlan, const char
*device,
hdr.linktype = 1;
if (write(fd, &hdr, sizeof(hdr)) < sizeof(hdr)) {
- qemu_error("-net dump write error: %s\n", strerror(errno));
+ error_report("-net dump write error: %s", strerror(errno));
close(fd);
return -1;
}
diff --git a/net/slirp.c b/net/slirp.c
index 317cca7..20af33a 100644
--- a/net/slirp.c
+++ b/net/slirp.c
@@ -413,14 +413,14 @@ static int slirp_hostfwd(SlirpState *s, const char
*redir_str,
if (slirp_add_hostfwd(s->slirp, is_udp, host_addr, host_port, guest_addr,
guest_port) < 0) {
- qemu_error("could not set up host forwarding rule '%s'\n",
- redir_str);
+ error_report("could not set up host forwarding rule '%s'",
+ redir_str);
return -1;
}
return 0;
fail_syntax:
- qemu_error("invalid host forwarding rule '%s'\n", redir_str);
+ error_report("invalid host forwarding rule '%s'", redir_str);
return -1;
}
@@ -473,10 +473,10 @@ static void slirp_smb_cleanup(SlirpState *s)
snprintf(cmd, sizeof(cmd), "rm -rf %s", s->smb_dir);
ret = system(cmd);
if (!WIFEXITED(ret)) {
- qemu_error("'%s' failed.\n", cmd);
+ error_report("'%s' failed.", cmd);
} else if (WEXITSTATUS(ret)) {
- qemu_error("'%s' failed. Error code: %d\n",
- cmd, WEXITSTATUS(ret));
+ error_report("'%s' failed. Error code: %d",
+ cmd, WEXITSTATUS(ret));
}
s->smb_dir[0] = '\0';
}
@@ -493,7 +493,7 @@ static int slirp_smb(SlirpState* s, const char
*exported_dir,
snprintf(s->smb_dir, sizeof(s->smb_dir), "/tmp/qemu-smb.%ld-%d",
(long)getpid(), instance++);
if (mkdir(s->smb_dir, 0700) < 0) {
- qemu_error("could not create samba server dir '%s'\n", s->smb_dir);
+ error_report("could not create samba server dir '%s'", s->smb_dir);
return -1;
}
snprintf(smb_conf, sizeof(smb_conf), "%s/%s", s->smb_dir, "smb.conf");
@@ -501,8 +501,8 @@ static int slirp_smb(SlirpState* s, const char
*exported_dir,
f = fopen(smb_conf, "w");
if (!f) {
slirp_smb_cleanup(s);
- qemu_error("could not create samba server configuration file '%s'\n",
- smb_conf);
+ error_report("could not create samba server configuration file '%s'",
+ smb_conf);
return -1;
}
fprintf(f,
@@ -533,7 +533,7 @@ static int slirp_smb(SlirpState* s, const char
*exported_dir,
if (slirp_add_exec(s->slirp, 0, smb_cmdline, &vserver_addr, 139) < 0) {
slirp_smb_cleanup(s);
- qemu_error("conflicting/invalid smbserver address\n");
+ error_report("conflicting/invalid smbserver address");
return -1;
}
return 0;
@@ -618,14 +618,14 @@ static int slirp_guestfwd(SlirpState *s, const char
*config_str,
snprintf(buf, sizeof(buf), "guestfwd.tcp:%d", port);
fwd->hd = qemu_chr_open(buf, p, NULL);
if (!fwd->hd) {
- qemu_error("could not open guest forwarding device '%s'\n", buf);
+ error_report("could not open guest forwarding device '%s'", buf);
qemu_free(fwd);
return -1;
}
if (slirp_add_exec(s->slirp, 3, fwd->hd, &server, port) < 0) {
- qemu_error("conflicting/invalid host:port in guest forwarding "
- "rule '%s'\n", config_str);
+ error_report("conflicting/invalid host:port in guest forwarding "
+ "rule '%s'", config_str);
qemu_free(fwd);
return -1;
}
@@ -638,7 +638,7 @@ static int slirp_guestfwd(SlirpState *s, const char
*config_str,
return 0;
fail_syntax:
- qemu_error("invalid guest forwarding rule '%s'\n", config_str);
+ error_report("invalid guest forwarding rule '%s'", config_str);
return -1;
}
diff --git a/net/socket.c b/net/socket.c
index 474d573..1c4e153 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -506,7 +506,7 @@ int net_init_socket(QemuOpts *opts,
if (qemu_opt_get(opts, "listen") ||
qemu_opt_get(opts, "connect") ||
qemu_opt_get(opts, "mcast")) {
- qemu_error("listen=, connect= and mcast= is invalid with fd=\n");
+ error_report("listen=, connect= and mcast= is invalid with fd=");
return -1;
}
@@ -525,7 +525,7 @@ int net_init_socket(QemuOpts *opts,
if (qemu_opt_get(opts, "fd") ||
qemu_opt_get(opts, "connect") ||
qemu_opt_get(opts, "mcast")) {
- qemu_error("fd=, connect= and mcast= is invalid with listen=\n");
+ error_report("fd=, connect= and mcast= is invalid with listen=");
return -1;
}
@@ -540,7 +540,7 @@ int net_init_socket(QemuOpts *opts,
if (qemu_opt_get(opts, "fd") ||
qemu_opt_get(opts, "listen") ||
qemu_opt_get(opts, "mcast")) {
- qemu_error("fd=, listen= and mcast= is invalid with connect=\n");
+ error_report("fd=, listen= and mcast= is invalid with connect=");
return -1;
}
@@ -555,7 +555,7 @@ int net_init_socket(QemuOpts *opts,
if (qemu_opt_get(opts, "fd") ||
qemu_opt_get(opts, "connect") ||
qemu_opt_get(opts, "listen")) {
- qemu_error("fd=, connect= and listen= is invalid with mcast=\n");
+ error_report("fd=, connect= and listen= is invalid with mcast=");
return -1;
}
@@ -565,7 +565,7 @@ int net_init_socket(QemuOpts *opts,
return -1;
}
} else {
- qemu_error("-socket requires fd=, listen=, connect= or mcast=\n");
+ error_report("-socket requires fd=, listen=, connect= or mcast=");
return -1;
}
diff --git a/net/tap-bsd.c b/net/tap-bsd.c
index 815997d..e51d068 100644
--- a/net/tap-bsd.c
+++ b/net/tap-bsd.c
@@ -69,7 +69,8 @@ int tap_open(char *ifname, int ifname_size, int *vnet_hdr,
int vnet_hdr_required
}
}
if (fd < 0) {
- qemu_error("warning: could not open %s (%s): no virtual network
emulation\n", dname, strerror(errno));
+ error_report("warning: could not open %s (%s): no virtual network
emulation",
+ dname, strerror(errno));
return -1;
}
#else
@@ -89,8 +90,8 @@ int tap_open(char *ifname, int ifname_size, int *vnet_hdr,
int vnet_hdr_required
*vnet_hdr = 0;
if (vnet_hdr_required && !*vnet_hdr) {
- qemu_error("vnet_hdr=1 requested, but no kernel "
- "support for IFF_VNET_HDR available");
+ error_report("vnet_hdr=1 requested, but no kernel "
+ "support for IFF_VNET_HDR available");
close(fd);
return -1;
}
diff --git a/net/tap-linux.c b/net/tap-linux.c
index c5748e6..03b8301 100644
--- a/net/tap-linux.c
+++ b/net/tap-linux.c
@@ -58,8 +58,8 @@ int tap_open(char *ifname, int ifname_size, int *vnet_hdr,
int vnet_hdr_required
}
if (vnet_hdr_required && !*vnet_hdr) {
- qemu_error("vnet_hdr=1 requested, but no kernel "
- "support for IFF_VNET_HDR available");
+ error_report("vnet_hdr=1 requested, but no kernel "
+ "support for IFF_VNET_HDR available");
close(fd);
return -1;
}
@@ -97,7 +97,7 @@ int tap_set_sndbuf(int fd, QemuOpts *opts)
}
if (ioctl(fd, TUNSETSNDBUF, &sndbuf) == -1 && qemu_opt_get(opts,
"sndbuf")) {
- qemu_error("TUNSETSNDBUF ioctl failed: %s\n", strerror(errno));
+ error_report("TUNSETSNDBUF ioctl failed: %s", strerror(errno));
return -1;
}
return 0;
@@ -108,7 +108,7 @@ int tap_probe_vnet_hdr(int fd)
struct ifreq ifr;
if (ioctl(fd, TUNGETIFF, &ifr) != 0) {
- qemu_error("TUNGETIFF ioctl() failed: %s\n", strerror(errno));
+ error_report("TUNGETIFF ioctl() failed: %s", strerror(errno));
return 0;
}
diff --git a/net/tap-solaris.c b/net/tap-solaris.c
index 0b42861..50d127a 100644
--- a/net/tap-solaris.c
+++ b/net/tap-solaris.c
@@ -186,8 +186,8 @@ int tap_open(char *ifname, int ifname_size, int *vnet_hdr,
int vnet_hdr_required
*vnet_hdr = 0;
if (vnet_hdr_required && !*vnet_hdr) {
- qemu_error("vnet_hdr=1 requested, but no kernel "
- "support for IFF_VNET_HDR available");
+ error_report("vnet_hdr=1 requested, but no kernel "
+ "support for IFF_VNET_HDR available");
close(fd);
return -1;
}
diff --git a/net/tap-win32.c b/net/tap-win32.c
index 8370c80..a5c2ce9 100644
--- a/net/tap-win32.c
+++ b/net/tap-win32.c
@@ -706,7 +706,7 @@ int net_init_tap(QemuOpts *opts, Monitor *mon, const char
*name, VLANState *vlan
ifname = qemu_opt_get(opts, "ifname");
if (!ifname) {
- qemu_error("tap: no interface name\n");
+ error_report("tap: no interface name");
return -1;
}
diff --git a/net/tap.c b/net/tap.c
index 9ba9b4a..672b0ee 100644
--- a/net/tap.c
+++ b/net/tap.c
@@ -394,7 +394,7 @@ int net_init_tap(QemuOpts *opts, Monitor *mon, const char
*name, VLANState *vlan
qemu_opt_get(opts, "script") ||
qemu_opt_get(opts, "downscript") ||
qemu_opt_get(opts, "vnet_hdr")) {
- qemu_error("ifname=, script=, downscript= and vnet_hdr= is invalid
with fd=\n");
+ error_report("ifname=, script=, downscript= and vnet_hdr= is
invalid with fd=");
return -1;
}
diff --git a/qemu-config.c b/qemu-config.c
index 2c9a7a5..8e06770 100644
--- a/qemu-config.c
+++ b/qemu-config.c
@@ -313,7 +313,7 @@ static QemuOptsList *find_list(const char *group)
break;
}
if (lists[i] == NULL) {
- qemu_error("there is no option group \"%s\"\n", group);
+ error_report("there is no option group \"%s\"", group);
}
return lists[i];
}
@@ -327,7 +327,7 @@ int qemu_set_option(const char *str)
rc = sscanf(str, "%63[^.].%63[^.].%63[^=]%n", group, id, arg, &offset);
if (rc < 3 || str[offset] != '=') {
- qemu_error("can't parse: \"%s\"\n", str);
+ error_report("can't parse: \"%s\"", str);
return -1;
}
@@ -338,8 +338,8 @@ int qemu_set_option(const char *str)
opts = qemu_opts_find(list, id);
if (!opts) {
- qemu_error("there is no %s \"%s\" defined\n",
- list->name, id);
+ error_report("there is no %s \"%s\" defined",
+ list->name, id);
return -1;
}
@@ -357,7 +357,7 @@ int qemu_global_option(const char *str)
rc = sscanf(str, "%63[^.].%63[^=]%n", driver, property, &offset);
if (rc < 2 || str[offset] != '=') {
- qemu_error("can't parse: \"%s\"\n", str);
+ error_report("can't parse: \"%s\"", str);
return -1;
}
diff --git a/qemu-error.c b/qemu-error.c
index d20fd0f..51e2abf 100644
--- a/qemu-error.c
+++ b/qemu-error.c
@@ -41,13 +41,19 @@ void error_printf(const char *fmt, ...)
va_end(ap);
}
-void qemu_error(const char *fmt, ...)
+/*
+ * Print an error message to current monitor if we have one, else to stderr.
+ * Appends a newline to the message.
+ * It's wrong to call this in a QMP monitor. Use qemu_error_new() there.
+ */
+void error_report(const char *fmt, ...)
{
va_list ap;
va_start(ap, fmt);
error_vprintf(fmt, ap);
va_end(ap);
+ error_printf("\n");
}
void qemu_error_internal(const char *file, int linenr, const char *func,
diff --git a/qemu-error.h b/qemu-error.h
index d90f1da..99dfcce 100644
--- a/qemu-error.h
+++ b/qemu-error.h
@@ -15,7 +15,7 @@
void error_vprintf(const char *fmt, va_list ap);
void error_printf(const char *fmt, ...) __attribute__ ((format(printf, 1, 2)));
-void qemu_error(const char *fmt, ...) __attribute__ ((format(printf, 1, 2)));
+void error_report(const char *fmt, ...) __attribute__ ((format(printf, 1, 2)));
void qemu_error_internal(const char *file, int linenr, const char *func,
const char *fmt, ...)
__attribute__ ((format(printf, 4, 5)));
diff --git a/qemu-tool.c b/qemu-tool.c
index 26f46eb..939049a 100644
--- a/qemu-tool.c
+++ b/qemu-tool.c
@@ -104,7 +104,7 @@ int64_t qemu_get_clock(QEMUClock *clock)
return (tv.tv_sec * 1000000000LL + (tv.tv_usec * 1000)) / 1000000;
}
-void qemu_error(const char *fmt, ...)
+void error_report(const char *fmt, ...)
{
va_list args;
diff --git a/qerror.c b/qerror.c
index a418bde..a6f0213 100644
--- a/qerror.c
+++ b/qerror.c
@@ -318,13 +318,13 @@ QString *qerror_human(const QError *qerror)
* qerror_print(): Print QError data
*
* This function will print the member 'desc' of the specified QError object,
- * it uses qemu_error() for this, so that the output is routed to the right
+ * it uses error_report() for this, so that the output is routed to the right
* place (ie. stderr or Monitor's device).
*/
void qerror_print(const QError *qerror)
{
QString *qstring = qerror_human(qerror);
- qemu_error("%s\n", qstring_get_str(qstring));
+ error_report("%s", qstring_get_str(qstring));
QDECREF(qstring);
}
diff --git a/savevm.c b/savevm.c
index 1f6c25e..0aef5cf 100644
--- a/savevm.c
+++ b/savevm.c
@@ -1743,7 +1743,7 @@ int load_vmstate(const char *name)
bs = get_bs_snapshots();
if (!bs) {
- qemu_error("No block device supports snapshots\n");
+ error_report("No block device supports snapshots");
return -EINVAL;
}
@@ -1755,20 +1755,21 @@ int load_vmstate(const char *name)
if (bdrv_has_snapshot(bs1)) {
ret = bdrv_snapshot_goto(bs1, name);
if (ret < 0) {
- if (bs != bs1)
- qemu_error("Warning: ");
switch(ret) {
case -ENOTSUP:
- qemu_error("Snapshots not supported on device '%s'\n",
- bdrv_get_device_name(bs1));
+ error_report("%sSnapshots not supported on device '%s'",
+ bs != bs1 ? "Warning: " : "",
+ bdrv_get_device_name(bs1));
break;
case -ENOENT:
- qemu_error("Could not find snapshot '%s' on device '%s'\n",
- name, bdrv_get_device_name(bs1));
+ error_report("%sCould not find snapshot '%s' on device
'%s'",
+ bs != bs1 ? "Warning: " : "",
+ name, bdrv_get_device_name(bs1));
break;
default:
- qemu_error("Error %d while activating snapshot on '%s'\n",
- ret, bdrv_get_device_name(bs1));
+ error_report("%sError %d while activating snapshot on
'%s'",
+ bs != bs1 ? "Warning: " : "",
+ ret, bdrv_get_device_name(bs1));
break;
}
/* fatal on snapshot block device */
@@ -1786,13 +1787,13 @@ int load_vmstate(const char *name)
/* restore the VM state */
f = qemu_fopen_bdrv(bs, 0);
if (!f) {
- qemu_error("Could not open VM state file\n");
+ error_report("Could not open VM state file");
return -EINVAL;
}
ret = qemu_loadvm_state(f);
qemu_fclose(f);
if (ret < 0) {
- qemu_error("Error %d while loading VM state\n", ret);
+ error_report("Error %d while loading VM state", ret);
return ret;
}
return 0;
diff --git a/vl.c b/vl.c
index c4c8c1f..e8a368b 100644
--- a/vl.c
+++ b/vl.c
@@ -2526,7 +2526,7 @@ void do_usb_add(Monitor *mon, const QDict *qdict)
{
const char *devname = qdict_get_str(qdict, "devname");
if (usb_device_add(devname, 1) < 0) {
- qemu_error("could not add USB device '%s'\n", devname);
+ error_report("could not add USB device '%s'", devname);
}
}
@@ -2534,7 +2534,7 @@ void do_usb_del(Monitor *mon, const QDict *qdict)
{
const char *devname = qdict_get_str(qdict, "devname");
if (usb_device_del(devname) < 0) {
- qemu_error("could not delete USB device '%s'\n", devname);
+ error_report("could not delete USB device '%s'", devname);
}
}
--
1.6.6.1
- [Qemu-devel] [PATCH 15/50] error: Don't abuse qemu_error() for non-error in scsi_hot_add(), (continued)
- [Qemu-devel] [PATCH 15/50] error: Don't abuse qemu_error() for non-error in scsi_hot_add(), Markus Armbruster, 2010/03/04
- [Qemu-devel] [PATCH 34/50] error: New QERR_BUS_NOT_FOUND, Markus Armbruster, 2010/03/04
- [Qemu-devel] [PATCH 39/50] error: New QERR_BAD_BUS_FOR_DEVICE, Markus Armbruster, 2010/03/04
- [Qemu-devel] [PATCH 42/50] error: New QERR_NO_BUS_FOR_DEVICE, Markus Armbruster, 2010/03/04
- [Qemu-devel] [PATCH 45/50] qemu-option: Functions to convert to/from QDict, Markus Armbruster, 2010/03/04
- [Qemu-devel] [PATCH 49/50] monitor: Use argument type 'O' for device_add, Markus Armbruster, 2010/03/04
- [Qemu-devel] [PATCH 47/50] qemu-option: Rename find_list() to qemu_find_opts() & external linkage, Markus Armbruster, 2010/03/04
- [Qemu-devel] [PATCH 16/50] error: Replace qemu_error() by error_report(),
Markus Armbruster <=
- [Qemu-devel] [PATCH 24/50] qdev: Factor qdev_create_from_info() out of qdev_create(), Markus Armbruster, 2010/03/04
- [Qemu-devel] [PATCH 19/50] error: Include the program name in error messages to stderr, Markus Armbruster, 2010/03/04
- [Qemu-devel] [PATCH 38/50] error: New error_printf_unless_qmp(), Markus Armbruster, 2010/03/04
- [Qemu-devel] [PATCH 20/50] error: Track locations in configuration files, Markus Armbruster, 2010/03/04
- [Qemu-devel] [PATCH 46/50] qemu-option: Move the implied first name into QemuOptsList, Markus Armbruster, 2010/03/04
- [Qemu-devel] [PATCH 22/50] error: Track locations on command line, Markus Armbruster, 2010/03/04
- [Qemu-devel] [PATCH 48/50] monitor: New argument type 'O', Markus Armbruster, 2010/03/04
- [Qemu-devel] [PATCH 29/50] error: Polish human-readable error descriptions, Markus Armbruster, 2010/03/04
- [Qemu-devel] [PATCH 21/50] QemuOpts: Fix qemu_config_parse() to catch file read errors, Markus Armbruster, 2010/03/04