qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] Re: [PATCH 2/2] eepro100: convert to new capability API


From: Michael S. Tsirkin
Subject: [Qemu-devel] Re: [PATCH 2/2] eepro100: convert to new capability API
Date: Wed, 7 Apr 2010 14:04:12 +0300
User-agent: Mutt/1.5.19 (2009-01-05)

On Wed, Apr 07, 2010 at 10:42:07AM +0200, Stefan Weil wrote:
> Michael S. Tsirkin schrieb:
> > Using new pci_add_capability_at_offset makes
> > eepro100 code cleaner.
> >
> > Signed-off-by: Michael S. Tsirkin <address@hidden>
> > ---
> > hw/eepro100.c | 22 +++++++++-------------
> > 1 files changed, 9 insertions(+), 13 deletions(-)
> >
> > diff --git a/hw/eepro100.c b/hw/eepro100.c
> > index 785a7da..a74d834 100644
> > --- a/hw/eepro100.c
> > +++ b/hw/eepro100.c
> > @@ -539,21 +539,17 @@ static void e100_pci_reset(EEPRO100State * s,
> > E100PCIDeviceInfo *e100_device)
> >
> > if (e100_device->power_management) {
> > /* Power Management Capabilities */
> > - int cfg_offset;
> > - pci_reserve_capability(&s->dev, PCI_CONFIG_HEADER_SIZE,
> > - 0xdc - PCI_CONFIG_HEADER_SIZE);
> > - cfg_offset = pci_add_capability(&s->dev, PCI_CAP_ID_PM, PCI_PM_SIZEOF);
> > - assert(cfg_offset == 0xdc);
> > - if (cfg_offset > 0) {
> > - /* Power Management Capabilities */
> > - pci_set_word(pci_conf + cfg_offset + PCI_PM_PMC, 0x7e21);
> > + int cfg_offset = 0xdc;
> 
> Suggestion:
> 
> uint8_t cfg_offset = 0xdc;

I don't think it matters as there's no chance of overflow or anything,
all math is on small constants.

> > + int r = pci_add_capability_at_offset(&s->dev, PCI_CAP_ID_PM,
> > + cfg_offset, PCI_PM_SIZEOF);
> > + assert(r >= 0);
> > + pci_set_word(pci_conf + cfg_offset + PCI_PM_PMC, 0x7e21);
> > #if 0 /* TODO: replace dummy code for power management emulation. */
> > - /* TODO: Power Management Control / Status. */
> > - pci_set_word(pci_conf + cfg_offset + PCI_PM_CTRL, 0x0000);
> > - /* TODO: Ethernet Power Consumption Registers (i82559 and later). */
> > - pci_set_byte(pci_conf + cfg_offset + PCI_PM_PPB_EXTENSIONS, 0x0000);
> > + /* TODO: Power Management Control / Status. */
> > + pci_set_word(pci_conf + cfg_offset + PCI_PM_CTRL, 0x0000);
> > + /* TODO: Ethernet Power Consumption Registers (i82559 and later). */
> > + pci_set_byte(pci_conf + cfg_offset + PCI_PM_PPB_EXTENSIONS, 0x0000);
> > #endif
> > - }
> > }
> >
> > #if EEPROM_SIZE > 0
> 
> Acked-by: Stefan Weil <address@hidden>




reply via email to

[Prev in Thread] Current Thread [Next in Thread]