qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH 5/5] lsi: Handle removal of selected devices


From: Jan Kiszka
Subject: [Qemu-devel] [PATCH 5/5] lsi: Handle removal of selected devices
Date: Tue, 4 May 2010 14:21:03 +0200

We must not store references to selected devices as they may be
hot-removed. Instead, look up the device based on its tag right before
using it. If the device disappeared, throw an interrupt and disconnect.

Signed-off-by: Jan Kiszka <address@hidden>
---
 hw/lsi53c895a.c |   60 ++++++++++++++++++++++++++++++++++--------------------
 1 files changed, 38 insertions(+), 22 deletions(-)

diff --git a/hw/lsi53c895a.c b/hw/lsi53c895a.c
index f088d06..9d3c44d 100644
--- a/hw/lsi53c895a.c
+++ b/hw/lsi53c895a.c
@@ -175,7 +175,6 @@ do { fprintf(stderr, "lsi_scsi: error: " fmt , ## 
__VA_ARGS__);} while (0)
 
 typedef struct lsi_request {
     uint32_t tag;
-    SCSIDevice *dev;
     uint32_t dma_len;
     uint8_t *dma_buf;
     uint32_t pending;
@@ -202,7 +201,6 @@ typedef struct {
      * 3 if a DMA operation is in progress.  */
     int waiting;
     SCSIBus bus;
-    SCSIDevice *select_dev;
     int current_lun;
     /* The tag is a combination of the device ID and the SCSI tag.  */
     uint32_t select_tag;
@@ -518,11 +516,25 @@ static void lsi_resume_script(LSIState *s)
     }
 }
 
+static void lsi_disconnect(LSIState *s)
+{
+    s->scntl1 &= ~LSI_SCNTL1_CON;
+    s->sstat1 &= ~PHASE_MASK;
+}
+
+static void lsi_bad_selection(LSIState *s, uint32_t id)
+{
+    DPRINTF("Selected absent target %d\n", id);
+    lsi_script_scsi_interrupt(s, 0, LSI_SIST1_STO);
+    lsi_disconnect(s);
+}
+
 /* Initiate a SCSI layer data transfer.  */
 static void lsi_do_dma(LSIState *s, int out)
 {
-    uint32_t count;
+    uint32_t count, id;
     target_phys_addr_t addr;
+    SCSIDevice *dev;
 
     assert(s->current);
     if (!s->current->dma_len) {
@@ -531,6 +543,13 @@ static void lsi_do_dma(LSIState *s, int out)
         return;
     }
 
+    id = s->current->tag >> 8;
+    dev = s->bus.devs[id];
+    if (!dev) {
+        lsi_bad_selection(s, id);
+        return;
+    }
+
     count = s->dbc;
     if (count > s->current->dma_len)
         count = s->current->dma_len;
@@ -550,8 +569,7 @@ static void lsi_do_dma(LSIState *s, int out)
     s->dbc -= count;
 
     if (s->current->dma_buf == NULL) {
-        s->current->dma_buf = s->current->dev->info->get_buf(s->current->dev,
-                                                             s->current->tag);
+        s->current->dma_buf = dev->info->get_buf(dev, s->current->tag);
     }
 
     /* ??? Set SFBR to first data byte.  */
@@ -565,10 +583,10 @@ static void lsi_do_dma(LSIState *s, int out)
         s->current->dma_buf = NULL;
         if (out) {
             /* Write the data.  */
-            s->current->dev->info->write_data(s->current->dev, 
s->current->tag);
+            dev->info->write_data(dev, s->current->tag);
         } else {
             /* Request any remaining data.  */
-            s->current->dev->info->read_data(s->current->dev, s->current->tag);
+            dev->info->read_data(dev, s->current->tag);
         }
     } else {
         s->current->dma_buf += count;
@@ -715,7 +733,9 @@ static void lsi_command_complete(SCSIBus *bus, int reason, 
uint32_t tag,
 
 static void lsi_do_command(LSIState *s)
 {
+    SCSIDevice *dev;
     uint8_t buf[16];
+    uint32_t id;
     int n;
 
     DPRINTF("Send command len=%d\n", s->dbc);
@@ -725,19 +745,24 @@ static void lsi_do_command(LSIState *s)
     s->sfbr = buf[0];
     s->command_complete = 0;
 
+    id = s->select_tag >> 8;
+    dev = s->bus.devs[id];
+    if (!dev) {
+        lsi_bad_selection(s, id);
+        return;
+    }
+
     assert(s->current == NULL);
     s->current = qemu_mallocz(sizeof(lsi_request));
     s->current->tag = s->select_tag;
-    s->current->dev = s->select_dev;
 
-    n = s->current->dev->info->send_command(s->current->dev, s->current->tag, 
buf,
-                                            s->current_lun);
+    n = dev->info->send_command(dev, s->current->tag, buf, s->current_lun);
     if (n > 0) {
         lsi_set_phase(s, PHASE_DI);
-        s->current->dev->info->read_data(s->current->dev, s->current->tag);
+        dev->info->read_data(dev, s->current->tag);
     } else if (n < 0) {
         lsi_set_phase(s, PHASE_DO);
-        s->current->dev->info->write_data(s->current->dev, s->current->tag);
+        dev->info->write_data(dev, s->current->tag);
     }
 
     if (!s->command_complete) {
@@ -771,12 +796,6 @@ static void lsi_do_status(LSIState *s)
     lsi_add_msg_byte(s, 0); /* COMMAND COMPLETE */
 }
 
-static void lsi_disconnect(LSIState *s)
-{
-    s->scntl1 &= ~LSI_SCNTL1_CON;
-    s->sstat1 &= ~PHASE_MASK;
-}
-
 static void lsi_do_msgin(LSIState *s)
 {
     int len;
@@ -1092,9 +1111,7 @@ again:
                 s->sstat0 |= LSI_SSTAT0_WOA;
                 s->scntl1 &= ~LSI_SCNTL1_IARB;
                 if (id >= LSI_MAX_DEVS || !s->bus.devs[id]) {
-                    DPRINTF("Selected absent target %d\n", id);
-                    lsi_script_scsi_interrupt(s, 0, LSI_SIST1_STO);
-                    lsi_disconnect(s);
+                    lsi_bad_selection(s, id);
                     break;
                 }
                 DPRINTF("Selected target %d%s\n",
@@ -1102,7 +1119,6 @@ again:
                 /* ??? Linux drivers compain when this is set.  Maybe
                    it only applies in low-level mode (unimplemented).
                 lsi_script_scsi_interrupt(s, LSI_SIST0_CMP, 0); */
-                s->select_dev = s->bus.devs[id];
                 s->select_tag = id << 8;
                 s->scntl1 |= LSI_SCNTL1_CON;
                 if (insn & (1 << 3)) {
-- 
1.6.0.2





reply via email to

[Prev in Thread] Current Thread [Next in Thread]