Re: [Qemu-devel] [PATCH 2/5] Add defines for PCI IDs.

[Blue Swirl]

On 5/7/10, Gerd Hoffmann <address@hidden> wrote:
> This patch allows to set PCI vendor and device IDs using defines
>  (PCI_VID and PCI_DID).  Use it for vgabios.bin.
>
>  Signed-off-by: Gerd Hoffmann <address@hidden>
>  ---
>   Makefile  |    4 ++--
>   vbe.c     |    6 +++++-
>   vgabios.c |    5 +++++
>   3 files changed, 12 insertions(+), 3 deletions(-)
>
>  diff --git a/Makefile b/Makefile
>  index c3c744c..d440b93 100644
>  --- a/Makefile
>  +++ b/Makefile
>  @@ -31,8 +31,8 @@ VGA_FILES := vgabios.c vgabios.h vgafonts.h vgatables.h
>   VBE_FILES := vbe.h vbe.c vbetables.h
>
>   # build flags
>  -vgabios.bin              : VGAFLAGS := -DVBE
>  -vgabios.debug.bin        : VGAFLAGS := -DVBE -DDEBUG
>  +vgabios.bin              : VGAFLAGS := -DVBE -DPCI_VID=0x1234
>  +vgabios.debug.bin        : VGAFLAGS := -DVBE -DPCI_VID=0x1234 -DDEBUG

-DPCI_DID missing...

>   vgabios-cirrus.bin       : VGAFLAGS := -DCIRRUS -DPCIBIOS
>   vgabios-cirrus.debug.bin : VGAFLAGS := -DCIRRUS -DPCIBIOS -DCIRRUS_DEBUG
>
>  diff --git a/vbe.c b/vbe.c
>  index f925c35..f9a77f0 100644
>  --- a/vbe.c
>  +++ b/vbe.c
>  @@ -925,7 +925,11 @@ Bit16u *AX;Bit16u CX; Bit16u ES;Bit16u DI;
>                  if (using_lfb) {
>                    info.NumberOfBanks = 1;
>                  }
>  -                lfb_addr = pci_get_lfb_addr(0x1234); // experimental vendor
>  +#ifdef PCI_VID
>  +                lfb_addr = pci_get_lfb_addr(PCI_VID);
>  +#else
>  +                lfb_addr = 0;
>  +#endif
>                  if (lfb_addr > 0) {
>                    info.PhysBasePtr = ((Bit32u)lfb_addr << 16);
>                  }
>  diff --git a/vgabios.c b/vgabios.c
>  index 3b09c92..a575b7b 100644
>  --- a/vgabios.c
>  +++ b/vgabios.c
>  @@ -210,8 +210,13 @@ vgabios_pci_data:
>   .word 0x1013
>   .word 0x00b8 // CLGD5446
>   #else
>  +#ifdef PCI_VID
>  +.word PCI_VID
>  +.word PCI_DID

... so this generates:
 .word 0x1234
 .word PCI_DID

I read only this patch, so sorry for the noise if I missed something.

>  +#else
>   #error "Unknown PCI vendor and device id"
>   #endif
>  +#endif
>   .word 0 // reserved
>   .word 0x18 // dlen
>   .byte 0 // revision
>
> --
>  1.6.6.1
>
>
>
>