[Qemu-devel] [PATCH 11/12] hw/omap1.c : separate uart module

[cmchao]

Signed-off-by: cmchao <address@hidden>
---
 Makefile.target |    3 +-
 hw/omap1.c      |  170 ------------------------------------------------
 hw/omap_uart.c  |  194 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 196 insertions(+), 171 deletions(-)
 create mode 100644 hw/omap_uart.c

diff --git a/Makefile.target b/Makefile.target
index 20bcb8a..a01daa4 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -263,7 +263,8 @@ obj-arm-y += pxa2xx.o pxa2xx_pic.o pxa2xx_gpio.o 
pxa2xx_timer.o pxa2xx_dma.o
 obj-arm-y += pxa2xx_lcd.o pxa2xx_mmci.o pxa2xx_pcmcia.o pxa2xx_keypad.o
 obj-arm-y += gumstix.o
 obj-arm-y += zaurus.o ide/microdrive.o spitz.o tosa.o tc6393xb.o
-obj-arm-y += omap1.o omap_lcdc.o omap_dma.o omap_clk.o omap_mmc.o omap_i2c.o 
omap_gpio.o omap_intc.o
+obj-arm-y += omap1.o omap_lcdc.o omap_dma.o omap_clk.o omap_mmc.o omap_i2c.o \
+               omap_gpio.o omap_intc.o omap_uart.o
 obj-arm-y += omap2.o omap_dss.o soc_dma.o omap_gptimer.o omap_synctimer.o \
                omap_gpmc.o omap_sdrc.o omap_spi.o omap_tap.o omap_l4.o
 obj-arm-y += omap_sx1.o palm.o tsc210x.o
diff --git a/hw/omap1.c b/hw/omap1.c
index 21c53fe..301eec5 100644
--- a/hw/omap1.c
+++ b/hw/omap1.c
@@ -1378,176 +1378,6 @@ static void omap_dpll_init(struct dpll_ctl_s *s, 
target_phys_addr_t base,
     cpu_register_physical_memory(base, 0x100, iomemtype);
 }
 
-/* UARTs */
-struct omap_uart_s {
-    target_phys_addr_t base;
-    SerialState *serial; /* TODO */
-    struct omap_target_agent_s *ta;
-    omap_clk fclk;
-    qemu_irq irq;
-
-    uint8_t eblr;
-    uint8_t syscontrol;
-    uint8_t wkup;
-    uint8_t cfps;
-    uint8_t mdr[2];
-    uint8_t scr;
-    uint8_t clksel;
-};
-
-void omap_uart_reset(struct omap_uart_s *s)
-{
-    s->eblr = 0x00;
-    s->syscontrol = 0;
-    s->wkup = 0x3f;
-    s->cfps = 0x69;
-    s->clksel = 0;
-}
-
-struct omap_uart_s *omap_uart_init(target_phys_addr_t base,
-                qemu_irq irq, omap_clk fclk, omap_clk iclk,
-                qemu_irq txdma, qemu_irq rxdma, CharDriverState *chr)
-{
-    struct omap_uart_s *s = (struct omap_uart_s *)
-            qemu_mallocz(sizeof(struct omap_uart_s));
-
-    s->base = base;
-    s->fclk = fclk;
-    s->irq = irq;
-#ifdef TARGET_WORDS_BIGENDIAN
-    s->serial = serial_mm_init(base, 2, irq, omap_clk_getrate(fclk)/16,
-                               chr ?: qemu_chr_open("null", "null", NULL), 1,
-                               1);
-#else
-    s->serial = serial_mm_init(base, 2, irq, omap_clk_getrate(fclk)/16,
-                               chr ?: qemu_chr_open("null", "null", NULL), 1,
-                               0);
-#endif
-    return s;
-}
-
-static uint32_t omap_uart_read(void *opaque, target_phys_addr_t addr)
-{
-    struct omap_uart_s *s = (struct omap_uart_s *) opaque;
-
-    addr &= 0xff;
-    switch (addr) {
-    case 0x20: /* MDR1 */
-        return s->mdr[0];
-    case 0x24: /* MDR2 */
-        return s->mdr[1];
-    case 0x40: /* SCR */
-        return s->scr;
-    case 0x44: /* SSR */
-        return 0x0;
-    case 0x48: /* EBLR (OMAP2) */
-        return s->eblr;
-    case 0x4C: /* OSC_12M_SEL (OMAP1) */
-        return s->clksel;
-    case 0x50: /* MVR */
-        return 0x30;
-    case 0x54: /* SYSC (OMAP2) */
-        return s->syscontrol;
-    case 0x58: /* SYSS (OMAP2) */
-        return 1;
-    case 0x5c: /* WER (OMAP2) */
-        return s->wkup;
-    case 0x60: /* CFPS (OMAP2) */
-        return s->cfps;
-    }
-
-    OMAP_BAD_REG(addr);
-    return 0;
-}
-
-static void omap_uart_write(void *opaque, target_phys_addr_t addr,
-                uint32_t value)
-{
-    struct omap_uart_s *s = (struct omap_uart_s *) opaque;
-
-    addr &= 0xff;
-    switch (addr) {
-    case 0x20: /* MDR1 */
-        s->mdr[0] = value & 0x7f;
-        break;
-    case 0x24: /* MDR2 */
-        s->mdr[1] = value & 0xff;
-        break;
-    case 0x40: /* SCR */
-        s->scr = value & 0xff;
-        break;
-    case 0x48: /* EBLR (OMAP2) */
-        s->eblr = value & 0xff;
-        break;
-    case 0x4C: /* OSC_12M_SEL (OMAP1) */
-        s->clksel = value & 1;
-        break;
-    case 0x44: /* SSR */
-    case 0x50: /* MVR */
-    case 0x58: /* SYSS (OMAP2) */
-        OMAP_RO_REG(addr);
-        break;
-    case 0x54: /* SYSC (OMAP2) */
-        s->syscontrol = value & 0x1d;
-        if (value & 2)
-            omap_uart_reset(s);
-        break;
-    case 0x5c: /* WER (OMAP2) */
-        s->wkup = value & 0x7f;
-        break;
-    case 0x60: /* CFPS (OMAP2) */
-        s->cfps = value & 0xff;
-        break;
-    default:
-        OMAP_BAD_REG(addr);
-    }
-}
-
-static CPUReadMemoryFunc * const omap_uart_readfn[] = {
-    omap_uart_read,
-    omap_uart_read,
-    omap_badwidth_read8,
-};
-
-static CPUWriteMemoryFunc * const omap_uart_writefn[] = {
-    omap_uart_write,
-    omap_uart_write,
-    omap_badwidth_write8,
-};
-
-struct omap_uart_s *omap2_uart_init(struct omap_target_agent_s *ta,
-                qemu_irq irq, omap_clk fclk, omap_clk iclk,
-                qemu_irq txdma, qemu_irq rxdma, CharDriverState *chr)
-{
-    target_phys_addr_t base = omap_l4_attach(ta, 0, 0);
-    struct omap_uart_s *s = omap_uart_init(base, irq,
-                    fclk, iclk, txdma, rxdma, chr);
-    int iomemtype = cpu_register_io_memory(omap_uart_readfn,
-                    omap_uart_writefn, s);
-
-    s->ta = ta;
-
-    cpu_register_physical_memory(base + 0x20, 0x100, iomemtype);
-
-    return s;
-}
-
-void omap_uart_attach(struct omap_uart_s *s, CharDriverState *chr)
-{
-    /* TODO: Should reuse or destroy current s->serial */
-#ifdef TARGET_WORDS_BIGENDIAN
-    s->serial = serial_mm_init(s->base, 2, s->irq,
-                               omap_clk_getrate(s->fclk) / 16,
-                               chr ?: qemu_chr_open("null", "null", NULL), 1,
-                               1);
-#else
-    s->serial = serial_mm_init(s->base, 2, s->irq,
-                               omap_clk_getrate(s->fclk) / 16,
-                               chr ?: qemu_chr_open("null", "null", NULL), 1,
-                               0);
-#endif
-}
-
 /* MPU Clock/Reset/Power Mode Control */
 static uint32_t omap_clkm_read(void *opaque, target_phys_addr_t addr)
 {
diff --git a/hw/omap_uart.c b/hw/omap_uart.c
new file mode 100644
index 0000000..395bf0c
--- /dev/null
+++ b/hw/omap_uart.c
@@ -0,0 +1,194 @@
+/*
+ * TI OMAP processors UART emulation.
+ *
+ * Copyright (C) 2006-2008 Andrzej Zaborowski  <address@hidden>
+ * Copyright (C) 2007-2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 or
+ * (at your option) version 3 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+#include "qemu-char.h"
+#include "hw.h"
+#include "omap.h"
+/* We use pc-style serial ports.  */
+#include "pc.h"
+
+/* UARTs */
+struct omap_uart_s {
+    target_phys_addr_t base;
+    SerialState *serial; /* TODO */
+    struct omap_target_agent_s *ta;
+    omap_clk fclk;
+    qemu_irq irq;
+
+    uint8_t eblr;
+    uint8_t syscontrol;
+    uint8_t wkup;
+    uint8_t cfps;
+    uint8_t mdr[2];
+    uint8_t scr;
+    uint8_t clksel;
+};
+
+void omap_uart_reset(struct omap_uart_s *s)
+{
+    s->eblr = 0x00;
+    s->syscontrol = 0;
+    s->wkup = 0x3f;
+    s->cfps = 0x69;
+    s->clksel = 0;
+}
+
+struct omap_uart_s *omap_uart_init(target_phys_addr_t base,
+                qemu_irq irq, omap_clk fclk, omap_clk iclk,
+                qemu_irq txdma, qemu_irq rxdma, CharDriverState *chr)
+{
+    struct omap_uart_s *s = (struct omap_uart_s *)
+            qemu_mallocz(sizeof(struct omap_uart_s));
+
+    s->base = base;
+    s->fclk = fclk;
+    s->irq = irq;
+#ifdef TARGET_WORDS_BIGENDIAN
+    s->serial = serial_mm_init(base, 2, irq, omap_clk_getrate(fclk)/16,
+                               chr ?: qemu_chr_open("null", "null", NULL), 1,
+                               1);
+#else
+    s->serial = serial_mm_init(base, 2, irq, omap_clk_getrate(fclk)/16,
+                               chr ?: qemu_chr_open("null", "null", NULL), 1,
+                               0);
+#endif
+    return s;
+}
+
+static uint32_t omap_uart_read(void *opaque, target_phys_addr_t addr)
+{
+    struct omap_uart_s *s = (struct omap_uart_s *) opaque;
+
+    addr &= 0xff;
+    switch (addr) {
+    case 0x20: /* MDR1 */
+        return s->mdr[0];
+    case 0x24: /* MDR2 */
+        return s->mdr[1];
+    case 0x40: /* SCR */
+        return s->scr;
+    case 0x44: /* SSR */
+        return 0x0;
+    case 0x48: /* EBLR (OMAP2) */
+        return s->eblr;
+    case 0x4C: /* OSC_12M_SEL (OMAP1) */
+        return s->clksel;
+    case 0x50: /* MVR */
+        return 0x30;
+    case 0x54: /* SYSC (OMAP2) */
+        return s->syscontrol;
+    case 0x58: /* SYSS (OMAP2) */
+        return 1;
+    case 0x5c: /* WER (OMAP2) */
+        return s->wkup;
+    case 0x60: /* CFPS (OMAP2) */
+        return s->cfps;
+    }
+
+    OMAP_BAD_REG(addr);
+    return 0;
+}
+
+static void omap_uart_write(void *opaque, target_phys_addr_t addr,
+                uint32_t value)
+{
+    struct omap_uart_s *s = (struct omap_uart_s *) opaque;
+
+    addr &= 0xff;
+    switch (addr) {
+    case 0x20: /* MDR1 */
+        s->mdr[0] = value & 0x7f;
+        break;
+    case 0x24: /* MDR2 */
+        s->mdr[1] = value & 0xff;
+        break;
+    case 0x40: /* SCR */
+        s->scr = value & 0xff;
+        break;
+    case 0x48: /* EBLR (OMAP2) */
+        s->eblr = value & 0xff;
+        break;
+    case 0x4C: /* OSC_12M_SEL (OMAP1) */
+        s->clksel = value & 1;
+        break;
+    case 0x44: /* SSR */
+    case 0x50: /* MVR */
+    case 0x58: /* SYSS (OMAP2) */
+        OMAP_RO_REG(addr);
+        break;
+    case 0x54: /* SYSC (OMAP2) */
+        s->syscontrol = value & 0x1d;
+        if (value & 2)
+            omap_uart_reset(s);
+        break;
+    case 0x5c: /* WER (OMAP2) */
+        s->wkup = value & 0x7f;
+        break;
+    case 0x60: /* CFPS (OMAP2) */
+        s->cfps = value & 0xff;
+        break;
+    default:
+        OMAP_BAD_REG(addr);
+    }
+}
+
+static CPUReadMemoryFunc * const omap_uart_readfn[] = {
+    omap_uart_read,
+    omap_uart_read,
+    omap_badwidth_read8,
+};
+
+static CPUWriteMemoryFunc * const omap_uart_writefn[] = {
+    omap_uart_write,
+    omap_uart_write,
+    omap_badwidth_write8,
+};
+
+struct omap_uart_s *omap2_uart_init(struct omap_target_agent_s *ta,
+                qemu_irq irq, omap_clk fclk, omap_clk iclk,
+                qemu_irq txdma, qemu_irq rxdma, CharDriverState *chr)
+{
+    target_phys_addr_t base = omap_l4_attach(ta, 0, 0);
+    struct omap_uart_s *s = omap_uart_init(base, irq,
+                    fclk, iclk, txdma, rxdma, chr);
+    int iomemtype = cpu_register_io_memory(omap_uart_readfn,
+                    omap_uart_writefn, s);
+
+    s->ta = ta;
+
+    cpu_register_physical_memory(base + 0x20, 0x100, iomemtype);
+
+    return s;
+}
+
+void omap_uart_attach(struct omap_uart_s *s, CharDriverState *chr)
+{
+    /* TODO: Should reuse or destroy current s->serial */
+#ifdef TARGET_WORDS_BIGENDIAN
+    s->serial = serial_mm_init(s->base, 2, s->irq,
+                               omap_clk_getrate(s->fclk) / 16,
+                               chr ?: qemu_chr_open("null", "null", NULL), 1,
+                               1);
+#else
+    s->serial = serial_mm_init(s->base, 2, s->irq,
+                               omap_clk_getrate(s->fclk) / 16,
+                               chr ?: qemu_chr_open("null", "null", NULL), 1,
+                               0);
+#endif
+}
-- 
1.7.0.4