qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH] Another fix to VMware depth computation


From: Tian, Kevin
Subject: [Qemu-devel] [PATCH] Another fix to VMware depth computation
Date: Mon, 28 Jun 2010 15:59:01 +0800

(patch made upon 0.12.4 release; tested on 0.12 branch; build test on master)

 console.h       |   13 -------------
 hw/vmware_vga.c |   10 ++--------
 qemu-common.h   |    1 -
 vl.c            |    8 --------
 4 files changed, 2 insertions(+), 30 deletions(-)

=====
    Another fix to VMware depth computation
    
    VMware SVGA presents to the guest with the depth of the host surface it 
renders
    to, and rejects to work if the two sides are mismatched. One problem is that
    current VMware VGA may calculate a wrong host depth, and then memcpy from 
virtual
    framebuffer to host surface may trigger segmentation fault. For example, 
when
    launching Qemu in a VNC connection, VMware SVGA thinks depth as '32', 
however the
    actual depth of VNC is '16'. The fault also happens when the host depth is 
not
    32 bit.
    
    4b5db3749c5fdba93e1ac0e8748c9a9a1064319f tempts to fix a similar issue, by
    changing from hard-coded 24bit depth to instead query the surface allocator
    (e.g. sdl). However it doesn't really work, because the point where query
    is invoked is earlier than the point where sdl is initialized. At query 
time,
    qemu uses a default surface allocator which, again, provides another 
hard-coded
    depth value - 32bit. So it happens to make VMware SVGA working on some 
hosts,
    but still fails in others.
    
    To solve this issue, this commit introduces a postcall interface to display
    surface, which is walked after surface allocators are actually initialized.
    At that point it's then safe to query host depth and present to the guest.
    
    Signed-off-by Kevin Tian <address@hidden>

diff --git a/console.h b/console.h
index dfc8ae4..05fbf17 100644
--- a/console.h
+++ b/console.h
@@ -122,6 +122,12 @@ struct DisplayAllocator {
     void (*free_displaysurface)(DisplaySurface *surface);
 };
 
+struct DisplayPostCallback {
+    void (*postcall) (void *);
+    void *parm;
+    struct DisplayPostCallback *next;
+};
+
 struct DisplayState {
     struct DisplaySurface *surface;
     void *opaque;
@@ -129,6 +135,7 @@ struct DisplayState {
 
     struct DisplayAllocator* allocator;
     struct DisplayChangeListener* listeners;
+    struct DisplayPostCallback* postcalls;
 
     void (*mouse_set)(int x, int y, int on);
     void (*cursor_define)(int width, int height, int bpp, int hot_x, int hot_y,
@@ -185,6 +192,12 @@ static inline void 
register_displaychangelistener(DisplayState *ds, DisplayChang
     ds->listeners = dcl;
 }
 
+static inline void register_displaypostcallback(DisplayState *ds, 
DisplayPostCallback *dpc)
+{
+    dpc->next = ds->postcalls;
+    ds->postcalls = dpc;
+}
+
 static inline void dpy_update(DisplayState *s, int x, int y, int w, int h)
 {
     struct DisplayChangeListener *dcl = s->listeners;
diff --git a/hw/vmware_vga.c b/hw/vmware_vga.c
index 01bb85b..d73cca6 100644
--- a/hw/vmware_vga.c
+++ b/hw/vmware_vga.c
@@ -927,8 +927,9 @@ static void vmsvga_update_display(void *opaque)
     }
 }
 
-static void vmsvga_reset(struct vmsvga_state_s *s)
+static void vmsvga_reset(void *parm)
 {
+    struct vmsvga_state_s *s = (struct vmsvga_state_s *)parm;
     s->index = 0;
     s->enable = 0;
     s->config = 0;
@@ -1133,6 +1134,8 @@ static const VMStateDescription vmstate_vmware_vga = {
 
 static void vmsvga_init(struct vmsvga_state_s *s, int vga_ram_size)
 {
+    DisplayPostCallback *dpc;
+
     s->scratch_size = SVGA_SCRATCH_SIZE;
     s->scratch = qemu_malloc(s->scratch_size * 4);
 
@@ -1160,7 +1163,10 @@ static void vmsvga_init(struct vmsvga_state_s *s, int 
vga_ram_size)
 
     rom_add_vga(VGABIOS_FILENAME);
 
-    vmsvga_reset(s);
+    dpc = qemu_mallocz(sizeof(DisplayPostCallback));
+    dpc->postcall = vmsvga_reset;
+    dpc->parm = s;
+    register_displaypostcallback(s->vga.ds, dpc);
 }
 
 static void pci_vmsvga_map_ioport(PCIDevice *pci_dev, int region_num,
diff --git a/qemu-common.h b/qemu-common.h
index a23afbc..19f107a 100644
--- a/qemu-common.h
+++ b/qemu-common.h
@@ -198,6 +198,7 @@ typedef struct DisplayState DisplayState;
 typedef struct DisplayChangeListener DisplayChangeListener;
 typedef struct DisplaySurface DisplaySurface;
 typedef struct DisplayAllocator DisplayAllocator;
+typedef struct DisplayPostCallback DisplayPostCallback;
 typedef struct PixelFormat PixelFormat;
 typedef struct TextConsole TextConsole;
 typedef TextConsole QEMUConsole;
diff --git a/vl.c b/vl.c
index 39182ea..9a3e9fd 100644
--- a/vl.c
+++ b/vl.c
@@ -4863,6 +4863,7 @@ int main(int argc, char **argv, char **envp)
     char boot_devices[33] = "cad"; /* default to HD->floppy->CD-ROM */
     DisplayState *ds;
     DisplayChangeListener *dcl;
+    DisplayPostCallback *dpc;
     int cyls, heads, secs, translation;
     QemuOpts *hda_opts = NULL, *opts;
     int optind;
@@ -6053,6 +6053,13 @@ int main(int argc, char **argv, char **envp)
     }
     dpy_resize(ds);
 
+    dpc = ds->postcalls;
+    while (dpc != NULL) {
+        if (dpc->postcall != NULL)
+            dpc->postcall(dpc->parm);
+        dpc = dpc->next;
+    }
+
     dcl = ds->listeners;
     while (dcl != NULL) {
         if (dcl->dpy_refresh != NULL) {

Thanks,
Kevin

Attachment: qemu-vmware-vga.patch
Description: qemu-vmware-vga.patch


reply via email to

[Prev in Thread] Current Thread [Next in Thread]