qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] Re: [PATCH 1/4] remove unused stuff from */exec.h


From: Blue Swirl
Subject: [Qemu-devel] Re: [PATCH 1/4] remove unused stuff from */exec.h
Date: Mon, 28 Jun 2010 17:43:07 +0000

On Mon, Jun 28, 2010 at 5:17 PM, Paolo Bonzini <address@hidden> wrote:
> Signed-off-by: Paolo Bonzini <address@hidden>
> ---
>  target-alpha/exec.h      |    2 --
>  target-cris/exec.h       |    3 ---
>  target-i386/exec.h       |    9 ---------
>  target-i386/op_helper.c  |    2 +-
>  target-microblaze/exec.h |    2 --
>  target-mips/exec.h       |    8 --------
>  target-mips/op_helper.c  |    5 +++++
>  7 files changed, 6 insertions(+), 25 deletions(-)
>
> diff --git a/target-alpha/exec.h b/target-alpha/exec.h
> index 66526e2..0fb459d 100644
> --- a/target-alpha/exec.h
> +++ b/target-alpha/exec.h
> @@ -28,8 +28,6 @@
>
>  register struct CPUAlphaState *env asm(AREG0);
>
> -#define PARAM(n) ((uint64_t)PARAM##n)
> -#define SPARAM(n) ((int32_t)PARAM##n)
>  #define FP_STATUS (env->fp_status)
>
>  #include "cpu.h"
> diff --git a/target-cris/exec.h b/target-cris/exec.h
> index 728aa80..55776ba 100644
> --- a/target-cris/exec.h
> +++ b/target-cris/exec.h
> @@ -28,9 +28,6 @@ register struct CPUCRISState *env asm(AREG0);
>  #include "softmmu_exec.h"
>  #endif
>
> -void cpu_cris_flush_flags(CPUCRISState *env, int cc_op);
> -void helper_movec(CPUCRISState *env, int reg, uint32_t val);
> -
>  static inline int cpu_has_work(CPUState *env)
>  {
>     return (env->interrupt_request & (CPU_INTERRUPT_HARD | 
> CPU_INTERRUPT_NMI));
> diff --git a/target-i386/exec.h b/target-i386/exec.h
> index 4ff3c57..cb34605 100644
> --- a/target-i386/exec.h
> +++ b/target-i386/exec.h
> @@ -33,23 +33,14 @@ register struct CPUX86State *env asm(AREG0);
>  #include "qemu-common.h"
>  #include "qemu-log.h"
>
> -#undef EAX
>  #define EAX (env->regs[R_EAX])
> -#undef ECX
>  #define ECX (env->regs[R_ECX])
> -#undef EDX
>  #define EDX (env->regs[R_EDX])
> -#undef EBX
>  #define EBX (env->regs[R_EBX])
> -#undef ESP
>  #define ESP (env->regs[R_ESP])
> -#undef EBP
>  #define EBP (env->regs[R_EBP])
> -#undef ESI
>  #define ESI (env->regs[R_ESI])
> -#undef EDI
>  #define EDI (env->regs[R_EDI])
> -#undef EIP
>  #define EIP (env->eip)
>  #define DF  (env->df)

IIRC these #undefs were added because some system includes on some
hosts also defined them. I think they should be replaced by open coded
versions (rather than using the QEMU_ prefix). Or just leave the
#undefs in place.

>
> diff --git a/target-i386/op_helper.c b/target-i386/op_helper.c
> index c1256f4..00fc671 100644
> --- a/target-i386/op_helper.c
> +++ b/target-i386/op_helper.c
> @@ -16,7 +16,7 @@
>  * You should have received a copy of the GNU Lesser General Public
>  * License along with this library; if not, see 
> <http://www.gnu.org/licenses/>.
>  */
> -#define CPU_NO_GLOBAL_REGS
> +
>  #include "exec.h"
>  #include "exec-all.h"
>  #include "host-utils.h"
> diff --git a/target-microblaze/exec.h b/target-microblaze/exec.h
> index 646701c..db1c99e 100644
> --- a/target-microblaze/exec.h
> +++ b/target-microblaze/exec.h
> @@ -27,8 +27,6 @@ register struct CPUMBState *env asm(AREG0);
>  #include "softmmu_exec.h"
>  #endif
>
> -void cpu_mb_flush_flags(CPUMBState *env, int cc_op);
> -
>  static inline int cpu_has_work(CPUState *env)
>  {
>     return (env->interrupt_request & (CPU_INTERRUPT_HARD | 
> CPU_INTERRUPT_NMI));
> diff --git a/target-mips/exec.h b/target-mips/exec.h
> index 01e9c4d..a07761d 100644
> --- a/target-mips/exec.h
> +++ b/target-mips/exec.h
> @@ -17,14 +17,6 @@ register struct CPUMIPSState *env asm(AREG0);
>  #include "softmmu_exec.h"
>  #endif /* !defined(CONFIG_USER_ONLY) */
>
> -void dump_fpu(CPUState *env);
> -void fpu_dump_state(CPUState *env, FILE *f,
> -                    int (*fpu_fprintf)(FILE *f, const char *fmt, ...),
> -                    int flags);
> -
> -void cpu_mips_clock_init (CPUState *env);
> -void cpu_mips_tlb_flush (CPUState *env, int flush_global);
> -
>  static inline int cpu_has_work(CPUState *env)
>  {
>     return (env->interrupt_request &
> diff --git a/target-mips/op_helper.c b/target-mips/op_helper.c
> index d09d6ed..344e0bd 100644
> --- a/target-mips/op_helper.c
> +++ b/target-mips/op_helper.c
> @@ -22,6 +22,11 @@
>  #include "host-utils.h"
>
>  #include "helper.h"
> +
> +#ifndef CONFIG_USER_ONLY
> +static inline void cpu_mips_tlb_flush (CPUState *env, int flush_global);
> +#endif
> +

Does 'inline' make sense with a function prototype?

Please also make the implementation of cpu_mips_tlb_flush() 'static'.

Otherwise, very nice cleanup. PARAM stuff dates from pre-TCG times.



reply via email to

[Prev in Thread] Current Thread [Next in Thread]