[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v3 05/13] blockdev: Clean up automatic drive deletio
From: |
Markus Armbruster |
Subject: |
[Qemu-devel] [PATCH v3 05/13] blockdev: Clean up automatic drive deletion |
Date: |
Thu, 1 Jul 2010 09:30:33 +0200 |
We automatically delete blockdev host parts on unplug of the guest
device. Too much magic, but we can't change that now.
The delete happens early in the guest device teardown, before the
connection to the host part is severed. Thus, the guest part's
pointer to the host part dangles for a brief time. No actual harm
comes from this, but we'll catch such dangling pointers a few commits
down the road. Clean up the dangling pointers by delaying the
automatic deletion until the guest part's pointer is gone.
Device usb-storage deliberately makes two qdev properties refer to the
same drive, because it automatically creates a second device. Again,
too much magic we can't change now. Multiple references worked okay
before, but now free_drive() dies for the second one. Zap the extra
reference.
Signed-off-by: Markus Armbruster <address@hidden>
---
blockdev.c | 23 +++++++++++++++++++++++
blockdev.h | 4 ++++
hw/qdev-properties.c | 10 ++++++++++
hw/scsi-disk.c | 2 +-
hw/scsi-generic.c | 2 +-
hw/usb-msd.c | 20 ++++++++++++++++----
hw/virtio-pci.c | 2 +-
7 files changed, 56 insertions(+), 7 deletions(-)
diff --git a/blockdev.c b/blockdev.c
index ba4f66f..4848112 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -17,6 +17,29 @@
static QTAILQ_HEAD(drivelist, DriveInfo) drives =
QTAILQ_HEAD_INITIALIZER(drives);
+/*
+ * We automatically delete the drive when a device using it gets
+ * unplugged. Questionable feature, but we can't just drop it.
+ * Device models call blockdev_mark_auto_del() to schedule the
+ * automatic deletion, and generic qdev code calls blockdev_auto_del()
+ * when deletion is actually safe.
+ */
+void blockdev_mark_auto_del(BlockDriverState *bs)
+{
+ DriveInfo *dinfo = drive_get_by_blockdev(bs);
+
+ dinfo->auto_del = 1;
+}
+
+void blockdev_auto_del(BlockDriverState *bs)
+{
+ DriveInfo *dinfo = drive_get_by_blockdev(bs);
+
+ if (dinfo->auto_del) {
+ drive_uninit(dinfo);
+ }
+}
+
QemuOpts *drive_add(const char *file, const char *fmt, ...)
{
va_list ap;
diff --git a/blockdev.h b/blockdev.h
index 6ab592f..32e6979 100644
--- a/blockdev.h
+++ b/blockdev.h
@@ -13,6 +13,9 @@
#include "block.h"
#include "qemu-queue.h"
+void blockdev_mark_auto_del(BlockDriverState *bs);
+void blockdev_auto_del(BlockDriverState *bs);
+
typedef enum {
IF_NONE,
IF_IDE, IF_SCSI, IF_FLOPPY, IF_PFLASH, IF_MTD, IF_SD, IF_VIRTIO, IF_XEN,
@@ -28,6 +31,7 @@ typedef struct DriveInfo {
BlockInterfaceType type;
int bus;
int unit;
+ int auto_del; /* see blockdev_mark_auto_del() */
QemuOpts *opts;
char serial[BLOCK_SERIAL_STRLEN + 1];
QTAILQ_ENTRY(DriveInfo) next;
diff --git a/hw/qdev-properties.c b/hw/qdev-properties.c
index 5a8739d..15ca6d3 100644
--- a/hw/qdev-properties.c
+++ b/hw/qdev-properties.c
@@ -293,6 +293,15 @@ static int parse_drive(DeviceState *dev, Property *prop,
const char *str)
return 0;
}
+static void free_drive(DeviceState *dev, Property *prop)
+{
+ DriveInfo **ptr = qdev_get_prop_ptr(dev, prop);
+
+ if (*ptr) {
+ blockdev_auto_del((*ptr)->bdrv);
+ }
+}
+
static int print_drive(DeviceState *dev, Property *prop, char *dest, size_t
len)
{
DriveInfo **ptr = qdev_get_prop_ptr(dev, prop);
@@ -305,6 +314,7 @@ PropertyInfo qdev_prop_drive = {
.size = sizeof(DriveInfo*),
.parse = parse_drive,
.print = print_drive,
+ .free = free_drive,
};
/* --- character device --- */
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 2b38984..d76e640 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -1043,7 +1043,7 @@ static void scsi_destroy(SCSIDevice *dev)
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
scsi_disk_purge_requests(s);
- drive_uninit(s->qdev.conf.dinfo);
+ blockdev_mark_auto_del(s->qdev.conf.dinfo->bdrv);
}
static int scsi_disk_initfn(SCSIDevice *dev)
diff --git a/hw/scsi-generic.c b/hw/scsi-generic.c
index e31060e..1859c94 100644
--- a/hw/scsi-generic.c
+++ b/hw/scsi-generic.c
@@ -453,7 +453,7 @@ static void scsi_destroy(SCSIDevice *d)
r = DO_UPCAST(SCSIGenericReq, req, QTAILQ_FIRST(&s->qdev.requests));
scsi_remove_request(r);
}
- drive_uninit(s->qdev.conf.dinfo);
+ blockdev_mark_auto_del(s->qdev.conf.dinfo->bdrv);
}
static int scsi_generic_initfn(SCSIDevice *dev)
diff --git a/hw/usb-msd.c b/hw/usb-msd.c
index 8e9718c..3dbfcab 100644
--- a/hw/usb-msd.c
+++ b/hw/usb-msd.c
@@ -522,24 +522,36 @@ static void usb_msd_password_cb(void *opaque, int err)
static int usb_msd_initfn(USBDevice *dev)
{
MSDState *s = DO_UPCAST(MSDState, dev, dev);
+ DriveInfo *dinfo = s->conf.dinfo;
- if (!s->conf.dinfo || !s->conf.dinfo->bdrv) {
+ if (!dinfo || !dinfo->bdrv) {
error_report("usb-msd: drive property not set");
return -1;
}
+ /*
+ * Hack alert: this pretends to be a block device, but it's really
+ * a SCSI bus that can serve only a single device, which it
+ * creates automatically. Two drive properties pointing to the
+ * same drive is not good: free_drive() dies for the second one.
+ * Zap the one we're not going to use.
+ *
+ * The hack is probably a bad idea.
+ */
+ s->conf.dinfo = NULL;
+
s->dev.speed = USB_SPEED_FULL;
scsi_bus_new(&s->bus, &s->dev.qdev, 0, 1, usb_msd_command_complete);
- s->scsi_dev = scsi_bus_legacy_add_drive(&s->bus, s->conf.dinfo, 0);
+ s->scsi_dev = scsi_bus_legacy_add_drive(&s->bus, dinfo, 0);
if (!s->scsi_dev) {
return -1;
}
s->bus.qbus.allow_hotplug = 0;
usb_msd_handle_reset(dev);
- if (bdrv_key_required(s->conf.dinfo->bdrv)) {
+ if (bdrv_key_required(dinfo->bdrv)) {
if (cur_mon) {
- monitor_read_bdrv_key_start(cur_mon, s->conf.dinfo->bdrv,
+ monitor_read_bdrv_key_start(cur_mon, dinfo->bdrv,
usb_msd_password_cb, s);
s->dev.auto_attach = 0;
} else {
diff --git a/hw/virtio-pci.c b/hw/virtio-pci.c
index d1303b1..31a68fe 100644
--- a/hw/virtio-pci.c
+++ b/hw/virtio-pci.c
@@ -571,7 +571,7 @@ static int virtio_blk_exit_pci(PCIDevice *pci_dev)
{
VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
- drive_uninit(proxy->block.dinfo);
+ blockdev_mark_auto_del(proxy->block.dinfo->bdrv);
return virtio_exit_pci(pci_dev);
}
--
1.6.6.1
- [Qemu-devel] [PATCH v3 10/13] block: Clean up bdrv_snapshots(), (continued)
- [Qemu-devel] [PATCH v3 10/13] block: Clean up bdrv_snapshots(), Markus Armbruster, 2010/07/01
- [Qemu-devel] [PATCH v3 01/13] scsi: scsi_bus_legacy_handle_cmdline() can fail, fix callers, Markus Armbruster, 2010/07/01
- [Qemu-devel] [PATCH v3 03/13] blockdev: Remove drive_get_serial(), Markus Armbruster, 2010/07/01
- [Qemu-devel] [PATCH v3 02/13] ide: Make it explicit that ide_create_drive() can't fail, Markus Armbruster, 2010/07/01
- [Qemu-devel] [PATCH v3 11/13] block: Fix virtual media change for if=none, Markus Armbruster, 2010/07/01
- [Qemu-devel] [PATCH v3 09/13] savevm: Survive hot-unplug of snapshot device, Markus Armbruster, 2010/07/01
- [Qemu-devel] [PATCH v3 13/13] pc: Fix CMOS info for drives defined with -device, Markus Armbruster, 2010/07/01
- [Qemu-devel] [PATCH v3 08/13] block: Catch attempt to attach multiple devices to a blockdev, Markus Armbruster, 2010/07/01
- [Qemu-devel] [PATCH v3 12/13] ide: Make PIIX and ISA IDE init functions return the qdev, Markus Armbruster, 2010/07/01
- [Qemu-devel] [PATCH v3 06/13] qdev: Decouple qdev_prop_drive from DriveInfo, Markus Armbruster, 2010/07/01
- [Qemu-devel] [PATCH v3 05/13] blockdev: Clean up automatic drive deletion,
Markus Armbruster <=
- [Qemu-devel] Re: [PATCH v3 00/13] More block-related fixes and cleanups, Kevin Wolf, 2010/07/01