[Qemu-devel] Re: [RFC PATCH 05/14] KVM-test: Add a subtest jumbo

[Lucas Meneghel Rodrigues]

On Tue, 2010-07-20 at 09:35 +0800, Amos Kong wrote:
> According to different nic model set different MTU for it. And ping from guest
> to host, to see whether tested size can be received by host.
> 
> Signed-off-by: Jason Wang <address@hidden>
> Signed-off-by: Amos Kong <address@hidden>
> ---
>  0 files changed, 0 insertions(+), 0 deletions(-)
> 
> diff --git a/client/tests/kvm/tests/jumbo.py b/client/tests/kvm/tests/jumbo.py
> new file mode 100644
> index 0000000..9f56a87
> --- /dev/null
> +++ b/client/tests/kvm/tests/jumbo.py
> @@ -0,0 +1,133 @@
> +import os, re, logging, commands, time, random
> +from autotest_lib.client.common_lib import error
> +import kvm_subprocess, kvm_test_utils, kvm_utils, kvm_net_utils
> +
> +def run_jumbo(test, params, env):
> +    """
> +    Test the RX jumbo frame function of vnics:
> +    1) boot the vm
> +    2) change the MTU of guest nics and host taps depends on the nic model

^ I think you meant 'depending on the nic model'

> +    3) add the static arp entry for guest nic
> +    4) wait for the MTU ok
> +    5) verify the patch mtu using ping
> +    6) ping the guest with large frames
> +    7) increament size ping

^ typo, increment

> +    8) flood ping the guest with large frames
> +    9) verify the path mtu
> +    10) revocer the mtu

^ maybe a typo, restore?

> +
> +    @param test: kvm test object
> +    @param params: Dictionary with the test parameters
> +    @param env: Dictionary with test environment.
> +    """
> +
> +    vm = kvm_test_utils.get_living_vm(env, params.get("main_vm"))
> +    session = kvm_test_utils.wait_for_login(vm)
> +    mtu = params.get("mtu", "1500")
> +    flood_time = params.get("flood_time", "300")
> +    max_icmp_pkt_size = int(mtu) - 28
> +
> +    ifname = vm.get_ifname(0)
> +    ip = vm.get_address(0)
> +    if ip is None:
> +        raise error.TestError("Could not get the ip address")
> +
> +    try:
> +        # Environment preparartion

^ typo, preparation

> +        ethname = kvm_net_utils.get_linux_ifname(session, vm.get_macaddr(0))
> +
> +        logging.info("Changing the mtu of guest ...")
> +        guest_mtu_cmd = "ifconfig %s mtu %s" % (ethname , mtu)
> +        s, o = session.get_command_status_output(guest_mtu_cmd)
> +        if s != 0:
> +            logging.error(o)
> +            raise error.TestError("Fail to set the mtu of guest nic: %s"
> +                                  % ethname)
> +
> +        logging.info("Chaning the mtu of host tap ...")
> +        host_mtu_cmd = "ifconfig %s mtu %s" % (ifname, mtu)
> +        s, o = commands.getstatusoutput(host_mtu_cmd)
> +        if s != 0:
> +            raise error.TestError("Fail to set the mtu of %s" % ifname)
> +
> +        logging.info("Add a temporary static arp entry ...")
> +        arp_add_cmd = "arp -s %s %s -i %s" % (ip, vm.get_macaddr(0), ifname)
> +        s, o = commands.getstatusoutput(arp_add_cmd)
> +        if s != 0 :
> +            raise error.TestError("Fail to add temporary arp entry")
> +
> +        def is_mtu_ok():
> +            s, o = kvm_net_utils.ping(ip, 1, interface = ifname,
> +                                      packetsize = max_icmp_pkt_size,
> +                                      hint = "do", timeout = 2)

^ please fix the default argument attribution, here and all subsequent
calls

> +            if s != 0:
> +                return False
> +            else:
> +                return True

^ Here you could simple use return s != 0

> +
> +        def verify_mtu():
> +            logging.info("Verify the path mtu")
> +            s, o = kvm_net_utils.ping(ip, 10, interface = ifname,
> +                                      packetsize = max_icmp_pkt_size,
> +                                      hint = "do", timeout = 15)
> +            if s != 0 :
> +                logging.error(o)
> +                raise error.TestFail("Path MTU is not as expected")
> +            if kvm_net_utils.get_loss_ratio(o) != 0:
> +                logging.error(o)
> +                raise error.TestFail("Packet loss ratio during mtu 
> verification"
> +                                     " is not zero")
> +
> +        def flood_ping():
> +            logging.info("Flood with large frames")
> +            kvm_net_utils.ping(ip, interface = ifname,
> +                               packetsize = max_icmp_pkt_size,
> +                               flood = True, timeout = float(flood_time))
> +
> +        def large_frame_ping(count = 100):
> +            logging.info("Large frame ping")
> +            s, o = kvm_net_utils.ping(ip, count, interface = ifname,
> +                                      packetsize = max_icmp_pkt_size,
> +                                      timeout = float(count) * 2)
> +            ratio = kvm_net_utils.get_loss_ratio(o)
> +            if ratio != 0:
> +                raise error.TestFail("Loss ratio of large frame ping is %s" \
> +                                     % ratio)

^ No need to use the backslash to end line here

> +        def size_increase_ping(step = random.randrange(90, 110)):
> +            logging.info("Size increase ping")
> +            for size in range(0, max_icmp_pkt_size + 1, step):
> +                logging.info("Ping %s with size %s" % (ip, size))
> +                s, o = kvm_net_utils.ping(ip, 1, interface = ifname,
> +                                          packetsize = size,
> +                                          hint = "do", timeout = 1)
> +                if s != 0:
> +                    s, o = kvm_net_utils.ping(ip, 10, interface = ifname,
> +                                              packetsize = size,
> +                                              adaptive = True, hint = "do",
> +                                              timeout = 20)
> +                    if kvm_net_utils.get_loss_ratio(o) > 50:
> +                        raise error.TestFail("ping loss ratio is greater "
> +                                             "than 50% for size %s" % size)

^ How do we stablish 50% as an acceptable packet loss ratio for this
test? Seems high to me, but I might be missing something

> +
> +        logging.info("Waiting for the MTU to be OK")
> +        # Wait for the MTU is OK

^ Unneeded comment, as we have an info message stating the same thing

> +        if not kvm_utils.wait_for(is_mtu_ok, 10, 0, 1):
> +            logging.debug(commands.getoutput("ifconfig -a"))
> +            raise error.TestError("10 seconds elapsed while the mtu is not"
> +                                  " as expected")
> +
> +        # Functional Test
> +        verify_mtu()
> +        large_frame_ping()
> +        size_increase_ping()
> +
> +        # Stress test
> +        flood_ping()
> +        verify_mtu()
> +
> +    finally:
> +        # Environment clean
> +        session.close()
> +        logging.info("Removing the temporary arp entry")
> +        commands.getstatusoutput("arp -d %s -i %s" % (ip, ifname))
> diff --git a/client/tests/kvm/tests_base.cfg.sample 
> b/client/tests/kvm/tests_base.cfg.sample
> index 4f58dc0..7f7b56a 100644
> --- a/client/tests/kvm/tests_base.cfg.sample
> +++ b/client/tests/kvm/tests_base.cfg.sample
> @@ -354,6 +354,9 @@ variants:
>          counts = 100
>          flood_minutes = 10
>  
> +    - jumbo: install setup unattended_install.cdrom
> +        type = jumbo
> +
>      - physical_resources_check: install setup unattended_install.cdrom
>          type = physical_resources_check
>          catch_uuid_cmd = dmidecode | awk -F: '/UUID/ {print $2}'
> @@ -489,10 +492,16 @@ variants:
>  variants:
>      - @rtl8139:
>          nic_model = rtl8139
> +        jumbo:
> +            mtu = 1500
>      - e1000:
>          nic_model = e1000
> +        jumbo:
> +            mtu = 16110
>      - virtio:
>          nic_model = virtio
> +        jumbo:
> +            mtu = 65520
>  
> 
>  # Guests
> @@ -1024,7 +1033,7 @@ variants:
>  
>      # Windows section
>      - @Windows:
> -        no autotest linux_s3 vlan_tag ioquit 
> unattended_install.(url|nfs|remote_ks)
> +        no autotest linux_s3 vlan_tag ioquit 
> unattended_install.(url|nfs|remote_ks) jumbo
>          shutdown_command = shutdown /s /f /t 0
>          reboot_command = shutdown /r /f /t 0
>          status_test_command = echo %errorlevel%
> 
> --
> To unsubscribe from this list: send the line "unsubscribe kvm" in
> the body of a message to address@hidden
> More majordomo info at  http://vger.kernel.org/majordomo-info.html