qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] Re: [Autotest] [RFC PATCH 08/14] KVM-test: Add a subtest of


From: Amos Kong
Subject: [Qemu-devel] Re: [Autotest] [RFC PATCH 08/14] KVM-test: Add a subtest of nic promisc
Date: Wed, 11 Aug 2010 09:34:41 +0800

On Thu, Jul 29, 2010 at 5:35 AM, Lucas Meneghel Rodrigues
<address@hidden> wrote:
> On Tue, 2010-07-20 at 09:35 +0800, Amos Kong wrote:
>> This test mainly covers TCP sent from host to guest and from guest to host
>> with repeatedly turn on/off NIC promiscuous mode.
>>
>> Signed-off-by: Amos Kong <address@hidden>
>> ---
>>  0 files changed, 0 insertions(+), 0 deletions(-)
>>
>> diff --git a/client/tests/kvm/tests/nic_promisc.py 
>> b/client/tests/kvm/tests/nic_promisc.py
>> new file mode 100644
>> index 0000000..9a0c979
>> --- /dev/null
>> +++ b/client/tests/kvm/tests/nic_promisc.py
>> @@ -0,0 +1,87 @@
>> +import logging, commands
>> +from autotest_lib.client.common_lib import error
>> +import kvm_utils, kvm_test_utils, kvm_net_utils
>> +
>> +def run_nic_promisc(test, params, env):
>> +    """
>> +    Test nic driver in promisc mode:
>> +
>> +    1) Boot up a guest
>> +    2) Repeatedly enable/disable promiscuous mode in guest
>> +    3) TCP data transmission from host to guest, and from guest to host,
>> +       with 1/1460/65000/100000000 bytes payloads
>> +    4) Clean temporary files
>> +    5) Stop enable/disable promiscuous mode change
>> +
>> +   address@hidden test: kvm test object
>> +   address@hidden params: Dictionary with the test parameters
>> +   address@hidden env: Dictionary with test environment
>> +    """
>> +    timeout = int(params.get("login_timeout", 360))
>> +    vm = kvm_test_utils.get_living_vm(env, params.get("main_vm"))
>> +    session = kvm_test_utils.wait_for_login(vm, timeout=timeout)
>> +    logging.info("Trying to log into guest '%s' by serial", vm.name)
>> +    session2 = kvm_utils.wait_for(lambda: vm.serial_login(),
>> +                                  timeout, 0, step=2)
>> +    if not session2:
>> +        raise error.TestFail("Could not log into guest '%s'" % vm.name)
>> +
>> +    def compare(filename):
>> +        cmd = "md5sum %s" % filename
>> +        s1, ret_host = commands.getstatusoutput(cmd)
>> +        s2, ret_guest = session.get_command_status_output(cmd)
>> +        if s1 != 0 or s2 != 0:
>> +            logging.debug("ret_host:%s, ret_guest:%s" % (ret_host, 
>> ret_guest))
>> +            logging.error("Could not get md5, cmd:%s" % cmd)
>> +            return False
>> +        if ret_host.strip() != ret_guest.strip():
>> +            logging.debug("ret_host :%s, ret_guest:%s" % (ret_host, 
>> ret_guest))
>> +            logging.error("Files' md5sum mismatch" % (receiver))
>> +            return False
>
> ^ The above debug messages will be confusing when looked by someone who
> is not familiar with the test code, so we should make their lives
> easier:
>
>    def compare(filename):
>        cmd = "md5sum %s" % filename
>        rc_host, md5_host = commands.getstatusoutput(cmd)
>        rc_guest, md5_guest = session.get_command_status_output(cmd)
>        if rc_host:
>            logging.debug('Could not get MD5 hash for file %s on host, output: 
> %s', filename, md5_host)
>            return False
>        if rc_guest:
>            logging.debug('Could not get MD5 hash for file %s on guest, 
> output: %s', filename, md5_guest)
>            return False
>        md5host = md5host.strip()
>        md5guest = md5guest.strip()
>        if md5host != md5guest:
>            logging.error('MD5 hash mismatch between file %s present on guest 
> and on host', filename)
>            logging.error('MD5 hash for file on guest: %s, MD5 hash for file 
> on host: %s', md5_host, md5_guest)
>            return False
>        return True
>
>
>> +        return True
>> +
>> +    ethname = kvm_net_utils.get_linux_ifname(session, vm.get_macaddr(0))
>> +    set_promisc_cmd = "ip link set %s promisc on; sleep 0.01;" % ethname
>> +    set_promisc_cmd += "ip link set %s promisc off; sleep 0.01" % ethname
>
> ^ You could do the above on a single attribution, see comment on patch 7
> of the patchseries.
>
>> +    logging.info("Set promisc change repeatedly in guest")
>> +    session2.sendline("while true; do %s; done" % set_promisc_cmd)
>> +
>> +    dd_cmd = "dd if=/dev/urandom of=%s bs=%d count=1"
>> +    filename = "/tmp/nic_promisc_file"
>> +    file_size = params.get("file_size", "1, 1460, 65000, 
>> 100000000").split(",")
>> +    try:
>> +        for size in file_size:
>> +            logging.info("Create %s bytes file on host" % size)
>> +            s, o = commands.getstatusoutput(dd_cmd % (filename, int(size)))
>> +            if s != 0:
>> +                logging.debug("Output: %s"% o)
>> +                raise error.TestFail("Create file on host failed")
>> +
>> +            logging.info("Transfer file from host to guest")
>> +            if not vm.copy_files_to(filename, filename):
>> +                raise error.TestFail("File transfer failed")
>> +            if not compare(filename):
>> +                raise error.TestFail("Compare file failed")
>
> ^ It'd be better if we don't abruptly fail the whole test if we get a
> failure for a single size, what about having a global failure counter,
> and increment it if we have failures, making sure we log errors
> appropriately?

How about add a success counter ?
only success_counter+1 after successfully compare.
If the end success_counter doesn't equals to len(file_size), raise and
fail exception.

>> +            logging.info("Create %s bytes file on guest" % size)
>> +            if session.get_command_status(dd_cmd % (filename, int(size)),
>> +                                                    timeout=100) != 0:
>> +                raise error.TestFail("Create file on guest failed")
>> +
>> +            logging.info("Transfer file from guest to host")
>> +            if not vm.copy_files_from(filename, filename):
>> +                raise error.TestFail("File transfer failed")
>> +            if not compare(filename):
>> +                raise error.TestFail("Compare file failed")
>
> ^ Same comment as above.
>
>> +            logging.info("Clean temporal files")
>
> ^ Typo, temporary
>
>> +            cmd = "rm -f %s" % filename
>> +            s1, o = commands.getstatusoutput(cmd)
>> +            s2 = session.get_command_status(cmd)
>> +            if s1 != 0 or s2 != 0:
>> +                raise error.TestError("Fail to clean temporal files")
>
> ^ Same as above, with the exception that maybe a failure during cleanup
> is not something so bad we'd need to fail the entire test because of it.
>
>> +    finally:
>> +        logging.info("Restore the %s to the nonpromisc mode" % ethname)
>> +        session2.close()
>> +        session.get_command_status("ip link set %s promisc off" % ethname)
>> +        session.close()
>> diff --git a/client/tests/kvm/tests_base.cfg.sample 
>> b/client/tests/kvm/tests_base.cfg.sample
>> index 03d15c0..9e2b9a0 100644
>> --- a/client/tests/kvm/tests_base.cfg.sample
>> +++ b/client/tests/kvm/tests_base.cfg.sample
>> @@ -370,6 +370,10 @@ variants:
>>          scp_timeout = 300
>>          thread_num = 10
>>
>> +    - nic_promisc:  install setup unattended_install.cdrom
>> +        type = nic_promisc
>> +        file_size = 1, 1460, 65000, 100000000
>> +
>>      - physical_resources_check: install setup unattended_install.cdrom
>>          type = physical_resources_check
>>          catch_uuid_cmd = dmidecode | awk -F: '/UUID/ {print $2}'
>> @@ -1046,7 +1050,7 @@ variants:
>>
>>      # Windows section
>>      - @Windows:
>> -        no autotest linux_s3 vlan_tag ioquit 
>> unattended_install.(url|nfs|remote_ks) jumbo file_transfer nicdriver_unload
>> +        no autotest linux_s3 vlan_tag ioquit 
>> unattended_install.(url|nfs|remote_ks) jumbo file_transfer nicdriver_unload 
>> nic_promisc
>>          shutdown_command = shutdown /s /f /t 0
>>          reboot_command = shutdown /r /f /t 0
>>          status_test_command = echo %errorlevel%
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe kvm" in
>> the body of a message to address@hidden
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
>
> _______________________________________________
> Autotest mailing list
> address@hidden
> http://test.kernel.org/cgi-bin/mailman/listinfo/autotest
>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]