qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v6 02/12] pci/bridge: fix pci_bridge_reset()


From: Isaku Yamahata
Subject: [Qemu-devel] [PATCH v6 02/12] pci/bridge: fix pci_bridge_reset()
Date: Wed, 20 Oct 2010 17:18:51 +0900

The default value of base/limit registers aren't specified in the spec.
So pci_bridge_reset() shouldn't touch them.
Instead, introduced two functions to reset those registers in a way
of typical implementation. zero base/limit registers or disable forwarding.
They will be used later.

Signed-off-by: Isaku Yamahata <address@hidden>
---
Changes v5 -> v6:
- pci_bridge_disable_base_limit()

Changes v4 -> v5:
- drop the lines in pci_bridge_reset()
- introduced two functions to reset base/limit registers.
---
 hw/pci_bridge.c |   48 ++++++++++++++++++++++++++++++++++++++++++------
 hw/pci_bridge.h |    1 +
 2 files changed, 43 insertions(+), 6 deletions(-)

diff --git a/hw/pci_bridge.c b/hw/pci_bridge.c
index 638e3b3..7e8488a 100644
--- a/hw/pci_bridge.c
+++ b/hw/pci_bridge.c
@@ -151,6 +151,26 @@ void pci_bridge_write_config(PCIDevice *d,
     }
 }
 
+void pci_bridge_disable_base_limit(PCIDevice *dev)
+{
+    uint8_t *conf = dev->config;
+
+    pci_byte_test_and_set_mask(conf + PCI_IO_BASE,
+                               PCI_IO_RANGE_MASK & 0xff);
+    pci_byte_test_and_clear_mask(conf + PCI_IO_LIMIT,
+                                 PCI_IO_RANGE_MASK & 0xff);
+    pci_word_test_and_set_mask(conf + PCI_MEMORY_BASE,
+                               PCI_MEMORY_RANGE_MASK & 0xffff);
+    pci_word_test_and_clear_mask(conf + PCI_MEMORY_LIMIT,
+                                 PCI_MEMORY_RANGE_MASK & 0xffff);
+    pci_word_test_and_set_mask(conf + PCI_PREF_MEMORY_BASE,
+                               PCI_PREF_RANGE_MASK & 0xffff);
+    pci_word_test_and_clear_mask(conf + PCI_PREF_MEMORY_LIMIT,
+                                 PCI_PREF_RANGE_MASK & 0xffff);
+    pci_set_word(conf + PCI_PREF_BASE_UPPER32, 0);
+    pci_set_word(conf + PCI_PREF_LIMIT_UPPER32, 0);
+}
+
 /* reset bridge specific configuration registers */
 void pci_bridge_reset_reg(PCIDevice *dev)
 {
@@ -161,12 +181,28 @@ void pci_bridge_reset_reg(PCIDevice *dev)
     conf[PCI_SUBORDINATE_BUS] = 0;
     conf[PCI_SEC_LATENCY_TIMER] = 0;
 
-    conf[PCI_IO_BASE] = 0;
-    conf[PCI_IO_LIMIT] = 0;
-    pci_set_word(conf + PCI_MEMORY_BASE, 0);
-    pci_set_word(conf + PCI_MEMORY_LIMIT, 0);
-    pci_set_word(conf + PCI_PREF_MEMORY_BASE, 0);
-    pci_set_word(conf + PCI_PREF_MEMORY_LIMIT, 0);
+    /*
+     * the default values for base/limit registers aren't specified
+     * in the PCI-to-PCI-bridge spec. So we don't thouch them here.
+     * Each implementation can override it.
+     * typical implementation does
+     * zero base/limit registers or
+     * disable forwarding: pci_bridge_disable_base_limit()
+     * If disable forwarding is wanted, call pci_bridge_disable_base_limit()
+     * after this function.
+     */
+    pci_byte_test_and_clear_mask(conf + PCI_IO_BASE,
+                                 PCI_IO_RANGE_MASK & 0xff);
+    pci_byte_test_and_clear_mask(conf + PCI_IO_LIMIT,
+                                 PCI_IO_RANGE_MASK & 0xff);
+    pci_word_test_and_clear_mask(conf + PCI_MEMORY_BASE,
+                                 PCI_MEMORY_RANGE_MASK & 0xffff);
+    pci_word_test_and_clear_mask(conf + PCI_MEMORY_LIMIT,
+                                 PCI_MEMORY_RANGE_MASK & 0xffff);
+    pci_word_test_and_clear_mask(conf + PCI_PREF_MEMORY_BASE,
+                                 PCI_PREF_RANGE_MASK & 0xffff);
+    pci_word_test_and_clear_mask(conf + PCI_PREF_MEMORY_LIMIT,
+                                 PCI_PREF_RANGE_MASK & 0xffff);
     pci_set_word(conf + PCI_PREF_BASE_UPPER32, 0);
     pci_set_word(conf + PCI_PREF_LIMIT_UPPER32, 0);
 
diff --git a/hw/pci_bridge.h b/hw/pci_bridge.h
index f6fade0..84411a6 100644
--- a/hw/pci_bridge.h
+++ b/hw/pci_bridge.h
@@ -39,6 +39,7 @@ pcibus_t pci_bridge_get_limit(const PCIDevice *bridge, 
uint8_t type);
 
 void pci_bridge_write_config(PCIDevice *d,
                              uint32_t address, uint32_t val, int len);
+void pci_bridge_disable_base_limit(PCIDevice *dev);
 void pci_bridge_reset_reg(PCIDevice *dev);
 void pci_bridge_reset(DeviceState *qdev);
 
-- 
1.7.1.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]