Re: [Qemu-devel] [PATCH 1/2] rtl8139: add vlan tag insertion

[Stefan Hajnoczi]

On Sun, Nov 7, 2010 at 9:25 PM, Benjamin Poirier
<address@hidden> wrote:
> Add support to the emulated hardware to add vlan tags in packets going
> from the guest to the network.
>
> Signed-off-by: Benjamin Poirier <address@hidden>
> Cc: Igor V. Kovalenko <address@hidden>
> ---
>  hw/rtl8139.c |   46 +++++++++++++++++++++++++++++++++++-----------
>  1 files changed, 35 insertions(+), 11 deletions(-)
>
> diff --git a/hw/rtl8139.c b/hw/rtl8139.c
> index d92981d..ac294da 100644
> --- a/hw/rtl8139.c
> +++ b/hw/rtl8139.c
> @@ -47,6 +47,8 @@
>  *                                  Darwin)
>  */
>
> +#include <net/ethernet.h>
> +
>  #include "hw.h"
>  #include "pci.h"
>  #include "qemu-timer.h"
> @@ -58,6 +60,10 @@
>
>  #define PCI_FREQUENCY 33000000L
>
> +/* bytes in VLAN tag */
> +#define VLAN_TCI_LEN 2
> +#define VLAN_HDR_LEN (ETHER_TYPE_LEN + VLAN_TCI_LEN)
> +
>  /* debug RTL8139 card C+ mode only */
>  //#define DEBUG_RTL8139CP 1
>
> @@ -1913,7 +1919,6 @@ static int rtl8139_cplus_transmit_one(RTL8139State *s)
>
>     cpu_physical_memory_read(cplus_tx_ring_desc,    (uint8_t *)&val, 4);
>     txdw0 = le32_to_cpu(val);
> -    /* TODO: implement VLAN tagging support, VLAN tag data is read to txdw1 
> */
>     cpu_physical_memory_read(cplus_tx_ring_desc+4,  (uint8_t *)&val, 4);
>     txdw1 = le32_to_cpu(val);
>     cpu_physical_memory_read(cplus_tx_ring_desc+8,  (uint8_t *)&val, 4);
> @@ -1925,9 +1930,6 @@ static int rtl8139_cplus_transmit_one(RTL8139State *s)
>            descriptor,
>            txdw0, txdw1, txbufLO, txbufHI));
>
> -    /* TODO: the following discard cast should clean clang analyzer output */
> -    (void)txdw1;
> -
>  /* w0 ownership flag */
>  #define CP_TX_OWN (1<<31)
>  /* w0 end of ring flag */
> @@ -1951,8 +1953,8 @@ static int rtl8139_cplus_transmit_one(RTL8139State *s)
>  /* w0 bits 0...15 : buffer size */
>  #define CP_TX_BUFFER_SIZE (1<<16)
>  #define CP_TX_BUFFER_SIZE_MASK (CP_TX_BUFFER_SIZE - 1)
> -/* w1 tag available flag */
> -#define CP_RX_TAGC (1<<17)
> +/* w1 add tag flag */
> +#define CP_TX_TAGC (1<<17)
>  /* w1 bits 0...15 : VLAN tag */
>  #define CP_TX_VLAN_TAG_MASK ((1<<16) - 1)
>  /* w2 low  32bit of Rx buffer ptr */
> @@ -1978,12 +1980,22 @@ static int rtl8139_cplus_transmit_one(RTL8139State *s)
>
>     DEBUG_PRINT(("RTL8139: +++ C+ Tx mode : transmitting from descriptor 
> %d\n", descriptor));
>
> +    int vlan_extra_size = 0;
>     if (txdw0 & CP_TX_FS)
>     {
>         DEBUG_PRINT(("RTL8139: +++ C+ Tx mode : descriptor %d is first 
> segment descriptor\n", descriptor));
>
> +        DEBUG_PRINT(("RTL8139: +++ C+ Tx mode : add vlan tag: %u tci: %u\n",
> +                !!(txdw1 & CP_TX_TAGC), bswap16(txdw1 &
> +                    CP_TX_VLAN_TAG_MASK)));

Please use leXX_to_cpu() and cpu_to_leXX() instead of bswapXX() for
little-endian conversion.  This is more explicit than unconditional
byteswapping and work on both big- and little-endian QEMU host
architectures.

Stefan