[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] Re: [PATCH] pci: allow hotplug removal of cold-plugged devi
From: |
Isaku Yamahata |
Subject: |
[Qemu-devel] Re: [PATCH] pci: allow hotplug removal of cold-plugged devices |
Date: |
Mon, 15 Nov 2010 11:10:46 +0900 |
User-agent: |
Mutt/1.5.19 (2009-01-05) |
Looks good. Thank you for catching pcie case.
On Sun, Nov 14, 2010 at 04:18:04PM +0200, Michael S. Tsirkin wrote:
> This patch fixes 5beb8ad503c88a76f2b8106c3b74b4ce485a60e1
> which broke hotplug removal of cold plugged devices:
>
> - pass addition/removal state to hotplug callbacks
> - use that in piix and pcie
>
> This also fixes an assert on hotplug removal of coldplugged
> express devices.
>
> Reported-by: by Cam Macdonell <address@hidden>.
^^^ minor nitpick
> Signed-off-by: Isaku Yamahata <address@hidden>
> Signed-off-by: Michael S. Tsirkin <address@hidden>
> ---
>
> So I think the below would be the cleanest way
> to fix the bug as we keep the hot/cold plug logic
> in a central palce. Untested. Comments? Cam?
>
>
> diff --git a/hw/acpi_piix4.c b/hw/acpi_piix4.c
> index 66c7885..f549089 100644
> --- a/hw/acpi_piix4.c
> +++ b/hw/acpi_piix4.c
> @@ -585,7 +585,8 @@ static void pciej_write(void *opaque, uint32_t addr,
> uint32_t val)
> PIIX4_DPRINTF("pciej write %x <== %d\n", addr, val);
> }
>
> -static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev, int
> state);
> +static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev,
> + PCIHotplugState state);
>
> static void piix4_acpi_system_hot_add_init(PCIBus *bus, PIIX4PMState *s)
> {
> @@ -615,18 +616,23 @@ static void disable_device(PIIX4PMState *s, int slot)
> s->pci0_status.down |= (1 << slot);
> }
>
> -static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev, int state)
> +static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev,
> + PCIHotplugState state)
> {
> int slot = PCI_SLOT(dev->devfn);
> PIIX4PMState *s = DO_UPCAST(PIIX4PMState, dev,
> DO_UPCAST(PCIDevice, qdev, qdev));
>
> - if (!dev->qdev.hotplugged)
> + /* Don't send event when device is enabled during qemu machine creation:
> + * it is present on boot, no hotplug event is necessary. We do send an
> + * event when the device is disabled later. */
> + if (state == PCI_COLDPLUG_ENABLED) {
> return 0;
> + }
>
> s->pci0_status.up = 0;
> s->pci0_status.down = 0;
> - if (state) {
> + if (state == PCI_HOTPLUG_ENABLED) {
> enable_device(s, slot);
> } else {
> disable_device(s, slot);
> diff --git a/hw/pci.c b/hw/pci.c
> index 30e1603..316b24f 100644
> --- a/hw/pci.c
> +++ b/hw/pci.c
> @@ -1566,8 +1566,11 @@ static int pci_qdev_init(DeviceState *qdev, DeviceInfo
> *base)
> pci_add_option_rom(pci_dev);
>
> if (bus->hotplug) {
> - /* lower layer must check qdev->hotplugged */
> - rc = bus->hotplug(bus->hotplug_qdev, pci_dev, 1);
> + /* Let buses differentiate between hotplug and when device is
> + * enabled during qemu machine creation. */
> + rc = bus->hotplug(bus->hotplug_qdev, pci_dev,
> + qdev->hotplugged ? PCI_HOTPLUG_ENABLED:
> + PCI_COLDPLUG_ENABLED);
> if (rc != 0) {
> int r = pci_unregister_device(&pci_dev->qdev);
> assert(!r);
> @@ -1581,7 +1584,8 @@ static int pci_unplug_device(DeviceState *qdev)
> {
> PCIDevice *dev = DO_UPCAST(PCIDevice, qdev, qdev);
>
> - return dev->bus->hotplug(dev->bus->hotplug_qdev, dev, 0);
> + return dev->bus->hotplug(dev->bus->hotplug_qdev, dev,
> + PCI_HOTPLUG_DISABLED);
> }
>
> void pci_qdev_register(PCIDeviceInfo *info)
> diff --git a/hw/pci.h b/hw/pci.h
> index 7100804..09b3e4c 100644
> --- a/hw/pci.h
> +++ b/hw/pci.h
> @@ -214,7 +214,15 @@ int pci_device_load(PCIDevice *s, QEMUFile *f);
>
> typedef void (*pci_set_irq_fn)(void *opaque, int irq_num, int level);
> typedef int (*pci_map_irq_fn)(PCIDevice *pci_dev, int irq_num);
> -typedef int (*pci_hotplug_fn)(DeviceState *qdev, PCIDevice *pci_dev, int
> state);
> +
> +typedef enum {
> + PCI_HOTPLUG_DISABLED,
> + PCI_HOTPLUG_ENABLED,
> + PCI_COLDPLUG_ENABLED,
> +} PCIHotplugState;
> +
> +typedef int (*pci_hotplug_fn)(DeviceState *qdev, PCIDevice *pci_dev,
> + PCIHotplugState state);
> void pci_bus_new_inplace(PCIBus *bus, DeviceState *parent,
> const char *name, int devfn_min);
> PCIBus *pci_bus_new(DeviceState *parent, const char *name, int devfn_min);
> diff --git a/hw/pcie.c b/hw/pcie.c
> index 35918f7..4df48b8 100644
> --- a/hw/pcie.c
> +++ b/hw/pcie.c
> @@ -192,14 +192,16 @@ static void pcie_cap_slot_event(PCIDevice *dev,
> PCIExpressHotPlugEvent event)
> }
>
> static int pcie_cap_slot_hotplug(DeviceState *qdev,
> - PCIDevice *pci_dev, int state)
> + PCIDevice *pci_dev, PCIHotplugState state)
> {
> PCIDevice *d = DO_UPCAST(PCIDevice, qdev, qdev);
> uint8_t *exp_cap = d->config + d->exp.exp_cap;
> uint16_t sltsta = pci_get_word(exp_cap + PCI_EXP_SLTSTA);
>
> - if (!pci_dev->qdev.hotplugged) {
> - assert(state); /* this case only happens at machine creation. */
> + /* Don't send event when device is enabled during qemu machine creation:
> + * it is present on boot, no hotplug event is necessary. We do send an
> + * event when the device is disabled later. */
> + if (state == PCI_COLDPLUG_ENABLED) {
> pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTSTA,
> PCI_EXP_SLTSTA_PDS);
> return 0;
>
--
yamahata