[Qemu-devel] Re: [PATCHv4 15/15] Pass boot device list to firmware.

[Gleb Natapov]

On Wed, Nov 17, 2010 at 09:54:27PM +0000, Blue Swirl wrote:
> 2010/11/16 Gleb Natapov <address@hidden>:
> > On Tue, Nov 16, 2010 at 06:30:19PM +0000, Blue Swirl wrote:
> >> >> Perhaps the FW path should use device class names if no name is 
> >> >> specified.
> >> > What do you mean by "device class name". We can do something like this:
> >> > if (dev->child_bus.lh_first)
> >> >        return dev->child_bus.lh_first->info->name;
> >> >
> >> > i.e if there is child bus use its bus name as fw name. This will make
> >> > all pci devices to have "pci" as fw name automatically. The problem is
> >> > that theoretically same device can provide different buses.
> >>
> >> I meant PCI class name, like "display" for display controllers,
> >> "network" for NICs etc.
> >>
> > That is what my pci bus related patch is doing already.
> >
> >> >> I'll try Sparc32 to see how this fits there.
> >>
> >> Except bootindex is not implemented for SCSI.
> > Will look into adding it.
> 
> Thanks. The bootindex on Sparc32 looks like this:
> bootindex /address@hidden/address@hidden,0
> /address@hidden/address@hidden
> 
For arches other then x86 there is a lot of work left to be done :)
For starter exotic sparc buses should get their own get_fw_dev_path()
implementation.

> I don't think I got Lance setup right.
> 
> OF paths for the devices would be:
> /address@hidden,10000000/address@hidden,10001000/address@hidden,8400000/address@hidden,8800000/address@hidden,0
> /address@hidden,10000000/address@hidden,10001000/address@hidden,8400010/address@hidden,8c00000
If qdev hierarchy does not correspond to real HW there is no much we can
do expect for fixing qdev.

> 
> The logic for ESP is that ESP (registers at 0x78800000, slot offset
> 0x880000) is handled by the DMA controller (registers at 0x78400000,
> slot offset 0x840000), they are in a SBus slot #5, and SBus (registers
> at 0x10001000) is in turn handled by IOMMU (registers at 0x10000000).
> Lance should be handled the same way.
> 
> This hierarchy is partly known by QEMU because DMA accesses use this
> flow, but not otherwise. There is no concept of SBus slots, DMA talks
> to IOMMU directly. Though in this case both ESP, Lance and their DMA
> controllers are on board devices in a MACIO chip. It may be possible
> to add the hierarchy information at each stage.
> 
> It should also be possible for BIOS to determine the device just from
> the physical address if we ignored OF compatibility.
It would be nice to be OF compatible at least at some level. Of course OF
spec is not strict enough to have two different implementations produce
exactly same device path that can be compared by strcpy.  Can we apply
the series now? At least for x86 it provides useful paths and work can
be continue for other arches by interested parties.

--
                        Gleb.