[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 10/15] scsi-disk: add data direction checking
From: |
Hannes Reinecke |
Subject: |
[Qemu-devel] [PATCH 10/15] scsi-disk: add data direction checking |
Date: |
Wed, 24 Nov 2010 12:16:05 +0100 |
scsi_req_parse() already provides for a data direction setting,
so we should be using it to check for correct direction.
And we should return the sense code 'INVALID FIELD IN CDB'
in these cases.
Signed-off-by: Hannes Reinecke <address@hidden>
---
hw/scsi-disk.c | 30 ++++++++++++++++++++++--------
1 files changed, 22 insertions(+), 8 deletions(-)
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 9a5cd8e..0ccb627 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -52,8 +52,6 @@ typedef struct SCSIDiskState SCSIDiskState;
typedef struct SCSIDiskReq {
SCSIRequest req;
- /* ??? We should probably keep track of whether the data transfer is
- a read or a write. Currently we rely on the host getting it right. */
/* Both sector and sector_count are in terms of qemu 512 byte blocks. */
uint64_t sector;
uint32_t sector_count;
@@ -172,6 +170,12 @@ static void scsi_read_data(SCSIRequest *req)
/* No data transfer may already be in progress */
assert(r->req.aiocb == NULL);
+ if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
+ DPRINTF("Data transfer direction invalid\n");
+ scsi_read_complete(r, -EINVAL);
+ return;
+ }
+
if (r->sector_count == (uint32_t)-1) {
DPRINTF("Read buf_len=%zd\n", r->iov[0].iov_len);
r->sector_count = 0;
@@ -227,12 +231,19 @@ static int scsi_handle_rw_error(SCSIDiskReq *r, int
error, int type)
if (type == SCSI_REQ_STATUS_RETRY_READ) {
r->req.bus->complete(r->req.bus, SCSI_REASON_DATA, &r->req, 0);
}
- if (error == EBADR) {
+ switch (error) {
+ case EBADR:
scsi_command_complete(r, CHECK_CONDITION,
SENSE_CODE(TARGET_FAILURE));
- } else {
+ break;
+ case EINVAL:
+ scsi_command_complete(r, CHECK_CONDITION,
+ SENSE_CODE(INVALID_FIELD));
+ break;
+ default:
scsi_command_complete(r, CHECK_CONDITION,
SENSE_CODE(IO_ERROR));
+ break;
}
bdrv_mon_event(s->bs, BDRV_ACTION_REPORT, is_read);
}
@@ -284,6 +295,12 @@ static int scsi_write_data(SCSIRequest *req)
/* No data transfer may already be in progress */
assert(r->req.aiocb == NULL);
+ if (r->req.cmd.mode != SCSI_XFER_TO_DEV) {
+ DPRINTF("Data transfer direction invalid\n");
+ scsi_write_complete(r, -EINVAL);
+ return 0;
+ }
+
n = iov_size(r->iov, r->iov_num) / 512;
if (n) {
qemu_iovec_init_external(&r->qiov, r->iov, r->iov_num);
@@ -970,11 +987,9 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t
*buf)
SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev);
ssize_t len = 0;
- int is_write;
uint8_t command;
command = buf[0];
- is_write = 0;
DPRINTF("Command: lun=%d tag=0x%x data=0x%02x", lun, tag, buf[0]);
if (scsi_req_parse(&r->req, buf) != 0) {
@@ -1057,7 +1072,6 @@ static int32_t scsi_send_command(SCSIRequest *req,
uint8_t *buf)
goto illegal_lba;
}
r->sector = r->req.cmd.lba * s->cluster_size;
- is_write = 1;
break;
case MODE_SELECT:
DPRINTF("Mode Select(6) (len %lu)\n", (long)r->req.cmd.xfer);
@@ -1098,7 +1112,7 @@ static int32_t scsi_send_command(SCSIRequest *req,
uint8_t *buf)
scsi_command_complete(r, GOOD, SENSE_CODE(NO_SENSE));
}
len += r->sector_count * 512;
- if (is_write) {
+ if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
return -len;
} else {
if (!r->sector_count)
--
1.6.0.2
- [Qemu-devel] [PATCH 08/15] scsi-disk: Allocate iovec dynamically, (continued)
[Qemu-devel] [PATCH 04/15] scsi: Move sense handling into the driver, Hannes Reinecke, 2010/11/24
[Qemu-devel] [PATCH 15/15] Make SCSI HBA configurable, Hannes Reinecke, 2010/11/24
[Qemu-devel] [PATCH 10/15] scsi-disk: add data direction checking,
Hannes Reinecke <=
[Qemu-devel] [PATCH 09/15] scsi: Use 'SCSIRequest' directly, Hannes Reinecke, 2010/11/24
[Qemu-devel] [PATCH 06/15] scsi: Update sense code handling, Hannes Reinecke, 2010/11/24
[Qemu-devel] [PATCH 11/15] Remove 'bus' argument from SCSI command completion callbacks, Hannes Reinecke, 2010/11/24
[Qemu-devel] [PATCH 14/15] megasas: LSI Megaraid SAS emulation, Hannes Reinecke, 2010/11/24
[Qemu-devel] Re: [PATCH 14/15] megasas: LSI Megaraid SAS emulation, Sebastian Herbszt, 2010/11/25
Re: [Qemu-devel] [PATCH 00/15] Megasas HBA emulation and SCSI update v.3, Christoph Hellwig, 2010/11/24