qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH 06/30] usb wacom: use new descriptor infrastructure.


From: Gerd Hoffmann
Subject: [Qemu-devel] [PATCH 06/30] usb wacom: use new descriptor infrastructure.
Date: Fri, 17 Dec 2010 12:26:22 +0100

Switch the usb wavom driver over to the
new descriptor infrastructure.

Signed-off-by: Gerd Hoffmann <address@hidden>
---
 hw/usb-wacom.c |  178 +++++++++++++++++++++++---------------------------------
 1 files changed, 73 insertions(+), 105 deletions(-)

diff --git a/hw/usb-wacom.c b/hw/usb-wacom.c
index 47f26cd..ffe6ac7 100644
--- a/hw/usb-wacom.c
+++ b/hw/usb-wacom.c
@@ -28,6 +28,7 @@
 #include "hw.h"
 #include "console.h"
 #include "usb.h"
+#include "usb-desc.h"
 
 /* Interface requests */
 #define WACOM_GET_REPORT       0x2101
@@ -54,68 +55,75 @@ typedef struct USBWacomState {
     int changed;
 } USBWacomState;
 
-static const uint8_t qemu_wacom_dev_descriptor[] = {
-    0x12,      /*  u8 bLength; */
-    0x01,      /*  u8 bDescriptorType; Device */
-    0x10, 0x10,        /*  u16 bcdUSB; v1.10 */
+enum {
+    STR_MANUFACTURER = 1,
+    STR_PRODUCT,
+    STR_SERIALNUMBER,
+};
 
-    0x00,      /*  u8  bDeviceClass; */
-    0x00,      /*  u8  bDeviceSubClass; */
-    0x00,      /*  u8  bDeviceProtocol; [ low/full speeds only ] */
-    0x08,      /*  u8  bMaxPacketSize0; 8 Bytes */
+static const USBDescStrings desc_strings = {
+    [STR_MANUFACTURER]     = "QEMU " QEMU_VERSION,
+    [STR_PRODUCT]          = "Wacom PenPartner",
+    [STR_SERIALNUMBER]     = "1",
+};
 
-    0x6a, 0x05,        /*  u16 idVendor; */
-    0x00, 0x00,        /*  u16 idProduct; */
-    0x10, 0x42,        /*  u16 bcdDevice */
+static const USBDescIface desc_iface_wacom = {
+    .bInterfaceNumber              = 0,
+    .bNumEndpoints                 = 1,
+    .bInterfaceClass               = USB_CLASS_HID,
+    .bInterfaceSubClass            = 0x01, /* boot */
+    .bInterfaceProtocol            = 0x02,
+    .ndesc                         = 1,
+    .descs = (USBDescOther[]) {
+        {
+            /* HID descriptor */
+            .data = (uint8_t[]) {
+                0x09,          /*  u8  bLength */
+                0x21,          /*  u8  bDescriptorType */
+                0x01, 0x10,    /*  u16 HID_class */
+                0x00,          /*  u8  country_code */
+                0x01,          /*  u8  num_descriptors */
+                0x22,          /*  u8  type: Report */
+                0x6e, 0,       /*  u16 len */
+            },
+        },
+    },
+    .eps = (USBDescEndpoint[]) {
+        {
+            .bEndpointAddress      = USB_DIR_IN | 0x01,
+            .bmAttributes          = USB_ENDPOINT_XFER_INT,
+            .wMaxPacketSize        = 8,
+            .bInterval             = 0x0a,
+        },
+    },
+};
 
-    0x01,      /*  u8  iManufacturer; */
-    0x02,      /*  u8  iProduct; */
-    0x00,      /*  u8  iSerialNumber; */
-    0x01,      /*  u8  bNumConfigurations; */
+static const USBDescDevice desc_device_wacom = {
+    .bcdUSB                        = 0x0110,
+    .bMaxPacketSize0               = 8,
+    .bNumConfigurations            = 1,
+    .confs = (USBDescConfig[]) {
+        {
+            .bNumInterfaces        = 1,
+            .bConfigurationValue   = 1,
+            .bmAttributes          = 0x80,
+            .bMaxPower             = 40,
+            .ifs = &desc_iface_wacom,
+        },
+    },
 };
 
-static const uint8_t qemu_wacom_config_descriptor[] = {
-    /* one configuration */
-    0x09,      /*  u8  bLength; */
-    0x02,      /*  u8  bDescriptorType; Configuration */
-    0x22, 0x00,        /*  u16 wTotalLength; */
-    0x01,      /*  u8  bNumInterfaces; (1) */
-    0x01,      /*  u8  bConfigurationValue; */
-    0x00,      /*  u8  iConfiguration; */
-    0x80,      /*  u8  bmAttributes;
-                                Bit 7: must be set,
-                                    6: Self-powered,
-                                    5: Remote wakeup,
-                                    4..0: resvd */
-    40,                /*  u8  MaxPower; */
-
-    /* one interface */
-    0x09,      /*  u8  if_bLength; */
-    0x04,      /*  u8  if_bDescriptorType; Interface */
-    0x00,      /*  u8  if_bInterfaceNumber; */
-    0x00,      /*  u8  if_bAlternateSetting; */
-    0x01,      /*  u8  if_bNumEndpoints; */
-    0x03,      /*  u8  if_bInterfaceClass; HID */
-    0x01,      /*  u8  if_bInterfaceSubClass; Boot */
-    0x02,      /*  u8  if_bInterfaceProtocol; [usb1.1 or single tt] */
-    0x00,      /*  u8  if_iInterface; */
-
-    /* HID descriptor */
-    0x09,      /*  u8  bLength; */
-    0x21,      /*  u8  bDescriptorType; */
-    0x01, 0x10,        /*  u16 HID_class */
-    0x00,      /*  u8  country_code */
-    0x01,      /*  u8  num_descriptors */
-    0x22,      /*  u8  type; Report */
-    0x6e, 0x00,        /*  u16 len */
-
-    /* one endpoint (status change endpoint) */
-    0x07,      /*  u8  ep_bLength; */
-    0x05,      /*  u8  ep_bDescriptorType; Endpoint */
-    0x81,      /*  u8  ep_bEndpointAddress; IN Endpoint 1 */
-    0x03,      /*  u8  ep_bmAttributes; Interrupt */
-    0x08, 0x00,        /*  u16 ep_wMaxPacketSize; */
-    0x0a,      /*  u8  ep_bInterval; */
+static const USBDesc desc_wacom = {
+    .id = {
+        .idVendor          = 0x056a,
+        .idProduct         = 0x0000,
+        .bcdDevice         = 0x4210,
+        .iManufacturer     = STR_MANUFACTURER,
+        .iProduct          = STR_PRODUCT,
+        .iSerialNumber     = STR_SERIALNUMBER,
+    },
+    .full = &desc_device_wacom,
+    .str  = desc_strings,
 };
 
 static void usb_mouse_event(void *opaque,
@@ -245,8 +253,14 @@ static int usb_wacom_handle_control(USBDevice *dev, int 
request, int value,
                                     int index, int length, uint8_t *data)
 {
     USBWacomState *s = (USBWacomState *) dev;
-    int ret = 0;
+    int ret;
+
+    ret = usb_desc_handle_control(dev, request, value, index, length, data);
+    if (ret >= 0) {
+        return ret;
+    }
 
+    ret = 0;
     switch (request) {
     case DeviceRequest | USB_REQ_GET_STATUS:
         data[0] = (1 << USB_DEVICE_SELF_POWERED) |
@@ -274,53 +288,6 @@ static int usb_wacom_handle_control(USBDevice *dev, int 
request, int value,
         dev->addr = value;
         ret = 0;
         break;
-    case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
-        switch (value >> 8) {
-        case USB_DT_DEVICE:
-            memcpy(data, qemu_wacom_dev_descriptor,
-                   sizeof(qemu_wacom_dev_descriptor));
-            ret = sizeof(qemu_wacom_dev_descriptor);
-            break;
-        case USB_DT_CONFIG:
-                   memcpy(data, qemu_wacom_config_descriptor,
-                   sizeof(qemu_wacom_config_descriptor));
-            ret = sizeof(qemu_wacom_config_descriptor);
-            break;
-        case USB_DT_STRING:
-            switch (value & 0xff) {
-            case 0:
-                /* language ids */
-                data[0] = 4;
-                data[1] = 3;
-                data[2] = 0x09;
-                data[3] = 0x04;
-                ret = 4;
-                break;
-            case 1:
-                /* serial number */
-                ret = set_usb_string(data, "1");
-                break;
-            case 2:
-               ret = set_usb_string(data, "Wacom PenPartner");
-                break;
-            case 3:
-                /* vendor description */
-                ret = set_usb_string(data, "QEMU " QEMU_VERSION);
-                break;
-            case 4:
-                ret = set_usb_string(data, "Wacom Tablet");
-                break;
-            case 5:
-                ret = set_usb_string(data, "Endpoint1 Interrupt Pipe");
-                break;
-            default:
-                goto fail;
-            }
-            break;
-        default:
-            goto fail;
-        }
-        break;
     case DeviceRequest | USB_REQ_GET_CONFIGURATION:
         data[0] = 1;
         ret = 1;
@@ -420,6 +387,7 @@ static struct USBDeviceInfo wacom_info = {
     .qdev.name      = "usb-wacom-tablet",
     .qdev.desc      = "QEMU PenPartner Tablet",
     .usbdevice_name = "wacom-tablet",
+    .usb_desc       = &desc_wacom,
     .qdev.size      = sizeof(USBWacomState),
     .init           = usb_wacom_initfn,
     .handle_packet  = usb_generic_handle_packet,
-- 
1.7.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]