[Qemu-devel] [PATCH 2/8] ahci: split ICH and AHCI even more

[Alexander Graf]

Sebastian's patch already did a pretty good job at splitting up ICH-9
AHCI code and the AHCI core. We need some more though. Copyright was missing,
the lspci dump belongs to ICH-9, we don't need the AHCI core to have its
own qdev device duplicate.

So let's split them a bit more in this patch, making things easier to
read an understand.

Signed-off-by: Alexander Graf <address@hidden>

---

v1 -> v2:

  - reflect ich name in init functions
---
 hw/ide/ahci.c |  110 ---------------------------------------------------------
 hw/ide/ich.c  |   90 +++++++++++++++++++++++++++++++++++++++++++++-
 2 files changed, 88 insertions(+), 112 deletions(-)

diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index 8b6947a..18187c8 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -19,47 +19,6 @@
  * You should have received a copy of the GNU Lesser General Public
  * License along with this library; if not, see <http://www.gnu.org/licenses/>.
  *
- *
- * lspci dump of a ICH-9 real device in IDE mode (hopefully close enough):
- *
- * 00:1f.2 SATA controller [0106]: Intel Corporation 82801IR/IO/IH 
(ICH9R/DO/DH) 6 port SATA AHCI Controller [8086:2922] (rev 02) (prog-if 01 
[AHCI 1.0])
- *         Subsystem: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port 
SATA AHCI Controller [8086:2922]
- *         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
- *         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
- *         Latency: 0
- *         Interrupt: pin B routed to IRQ 222
- *         Region 0: I/O ports at d000 [size=8]
- *         Region 1: I/O ports at cc00 [size=4]
- *         Region 2: I/O ports at c880 [size=8]
- *         Region 3: I/O ports at c800 [size=4]
- *         Region 4: I/O ports at c480 [size=32]
- *         Region 5: Memory at febf9000 (32-bit, non-prefetchable) [size=2K]
- *         Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- 
Count=1/16 Enable+
- *                 Address: fee0f00c  Data: 41d9
- *         Capabilities: [70] Power Management version 3
- *                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot+,D3cold-)
- *                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
- *         Capabilities: [a8] SATA HBA <?>
- *         Capabilities: [b0] Vendor Specific Information <?>
- *         Kernel driver in use: ahci
- *         Kernel modules: ahci
- * 00: 86 80 22 29 07 04 b0 02 02 01 06 01 00 00 00 00
- * 10: 01 d0 00 00 01 cc 00 00 81 c8 00 00 01 c8 00 00
- * 20: 81 c4 00 00 00 90 bf fe 00 00 00 00 86 80 22 29
- * 30: 00 00 00 00 80 00 00 00 00 00 00 00 0f 02 00 00
- * 40: 00 80 00 80 00 00 00 00 00 00 00 00 00 00 00 00
- * 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- * 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- * 70: 01 a8 03 40 08 00 00 00 00 00 00 00 00 00 00 00
- * 80: 05 70 09 00 0c f0 e0 fe d9 41 00 00 00 00 00 00
- * 90: 40 00 0f 82 93 01 00 00 00 00 00 00 00 00 00 00
- * a0: ac 00 00 00 0a 00 12 00 12 b0 10 00 48 00 00 00
- * b0: 09 00 06 20 00 00 00 00 00 00 00 00 00 00 00 00
- * c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- * d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- * e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- * f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00
- *
  */
 
 #include <hw/hw.h>
@@ -1156,72 +1115,3 @@ void ahci_reset(void *opaque)
         ahci_reset_port(&d->ahci, i);
     }
 }
-
-static int pci_ahci_init(PCIDevice *dev)
-{
-    struct AHCIPCIState *d;
-    d = DO_UPCAST(struct AHCIPCIState, card, dev);
-
-    pci_config_set_vendor_id(d->card.config, PCI_VENDOR_ID_INTEL);
-    pci_config_set_device_id(d->card.config, PCI_DEVICE_ID_INTEL_82801IR);
-
-    pci_config_set_class(d->card.config, PCI_CLASS_STORAGE_SATA);
-    pci_config_set_revision(d->card.config, 0x02);
-    pci_config_set_prog_interface(d->card.config, AHCI_PROGMODE_MAJOR_REV_1);
-
-    d->card.config[PCI_CACHE_LINE_SIZE] = 0x08;  /* Cache line size */
-    d->card.config[PCI_LATENCY_TIMER]   = 0x00;  /* Latency timer */
-    pci_config_set_interrupt_pin(d->card.config, 1);
-
-    /* XXX Software should program this register */
-    d->card.config[0x90]   = 1 << 6; /* Address Map Register - AHCI mode */
-
-    qemu_register_reset(ahci_reset, d);
-
-    /* XXX BAR size should be 1k, but that breaks, so bump it to 4k for now */
-    pci_register_bar(&d->card, 5, 0x1000, PCI_BASE_ADDRESS_SPACE_MEMORY,
-                     ahci_pci_map);
-
-    msi_init(dev, 0x50, 1, true, false);
-
-    ahci_init(&d->ahci, &dev->qdev);
-    d->ahci.irq = d->card.irq[0];
-
-    return 0;
-}
-
-static int pci_ahci_uninit(PCIDevice *dev)
-{
-    struct AHCIPCIState *d;
-    d = DO_UPCAST(struct AHCIPCIState, card, dev);
-
-    if (msi_enabled(dev)) {
-        msi_uninit(dev);
-    }
-
-    qemu_unregister_reset(ahci_reset, d);
-
-    return 0;
-}
-
-static void pci_ahci_write_config(PCIDevice *pci, uint32_t addr,
-                                  uint32_t val, int len)
-{
-    pci_default_write_config(pci, addr, val, len);
-    msi_write_config(pci, addr, val, len);
-}
-
-static PCIDeviceInfo ahci_info = {
-    .qdev.name  = "ahci",
-    .qdev.size  = sizeof(AHCIPCIState),
-    .init       = pci_ahci_init,
-    .exit       = pci_ahci_uninit,
-    .config_write = pci_ahci_write_config,
-};
-
-static void ahci_pci_register_devices(void)
-{
-    pci_qdev_register(&ahci_info);
-}
-
-device_init(ahci_pci_register_devices)
diff --git a/hw/ide/ich.c b/hw/ide/ich.c
index 9868b73..70cb766 100644
--- a/hw/ide/ich.c
+++ b/hw/ide/ich.c
@@ -1,3 +1,65 @@
+/*
+ * QEMU ICH Emulation
+ *
+ * Copyright (c) 2010 Sebastian Herbszt <address@hidden>
+ * Copyright (c) 2010 Alexander Graf <address@hidden>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ *
+ *
+ * lspci dump of a ICH-9 real device
+ *
+ * 00:1f.2 SATA controller [0106]: Intel Corporation 82801IR/IO/IH 
(ICH9R/DO/DH) 6 port SATA AHCI Controller [8086:2922] (rev 02) (prog-if 01 
[AHCI 1.0])
+ *         Subsystem: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port 
SATA AHCI Controller [8086:2922]
+ *         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
+ *         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
+ *         Latency: 0
+ *         Interrupt: pin B routed to IRQ 222
+ *         Region 0: I/O ports at d000 [size=8]
+ *         Region 1: I/O ports at cc00 [size=4]
+ *         Region 2: I/O ports at c880 [size=8]
+ *         Region 3: I/O ports at c800 [size=4]
+ *         Region 4: I/O ports at c480 [size=32]
+ *         Region 5: Memory at febf9000 (32-bit, non-prefetchable) [size=2K]
+ *         Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- 
Count=1/16 Enable+
+ *                 Address: fee0f00c  Data: 41d9
+ *         Capabilities: [70] Power Management version 3
+ *                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot+,D3cold-)
+ *                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+ *         Capabilities: [a8] SATA HBA <?>
+ *         Capabilities: [b0] Vendor Specific Information <?>
+ *         Kernel driver in use: ahci
+ *         Kernel modules: ahci
+ * 00: 86 80 22 29 07 04 b0 02 02 01 06 01 00 00 00 00
+ * 10: 01 d0 00 00 01 cc 00 00 81 c8 00 00 01 c8 00 00
+ * 20: 81 c4 00 00 00 90 bf fe 00 00 00 00 86 80 22 29
+ * 30: 00 00 00 00 80 00 00 00 00 00 00 00 0f 02 00 00
+ * 40: 00 80 00 80 00 00 00 00 00 00 00 00 00 00 00 00
+ * 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 70: 01 a8 03 40 08 00 00 00 00 00 00 00 00 00 00 00
+ * 80: 05 70 09 00 0c f0 e0 fe d9 41 00 00 00 00 00 00
+ * 90: 40 00 0f 82 93 01 00 00 00 00 00 00 00 00 00 00
+ * a0: ac 00 00 00 0a 00 12 00 12 b0 10 00 48 00 00 00
+ * b0: 09 00 06 20 00 00 00 00 00 00 00 00 00 00 00 00
+ * c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00
+ *
+ */
+
 #include <hw/hw.h>
 #include <hw/msi.h>
 #include <hw/pc.h>
@@ -11,7 +73,7 @@
 #include <hw/ide/pci.h>
 #include <hw/ide/ahci.h>
 
-static int pci_ich9_ahci_initfn(PCIDevice *dev)
+static int pci_ich9_ahci_init(PCIDevice *dev)
 {
     struct AHCIPCIState *d;
     d = DO_UPCAST(struct AHCIPCIState, card, dev);
@@ -44,11 +106,35 @@ static int pci_ich9_ahci_initfn(PCIDevice *dev)
     return 0;
 }
 
+static int pci_ich9_uninit(PCIDevice *dev)
+{
+    struct AHCIPCIState *d;
+    d = DO_UPCAST(struct AHCIPCIState, card, dev);
+
+    if (msi_enabled(dev)) {
+        msi_uninit(dev);
+    }
+
+    qemu_unregister_reset(ahci_reset, d);
+
+    return 0;
+}
+
+static void pci_ich9_write_config(PCIDevice *pci, uint32_t addr,
+                                  uint32_t val, int len)
+{
+    pci_default_write_config(pci, addr, val, len);
+    msi_write_config(pci, addr, val, len);
+}
+
 static PCIDeviceInfo ich_ahci_info[] = {
     {
         .qdev.name    = "ich9-ahci",
+        .qdev.alias   = "ahci",
         .qdev.size    = sizeof(AHCIPCIState),
-        .init         = pci_ich9_ahci_initfn,
+        .init         = pci_ich9_ahci_init,
+        .exit         = pci_ich9_uninit,
+        .config_write = pci_ich9_write_config,
     },{
         /* end of list */
     }
-- 
1.6.0.2