[Qemu-devel] Re: [PATCH] pcie: add flr support

[Michael S. Tsirkin]

On Wed, Dec 22, 2010 at 03:14:35PM +0900, Isaku Yamahata wrote:
> support flr.
> 
> Signed-off-by: Isaku Yamahata <address@hidden>


Applied.

> ---
>  hw/pci.c                |    6 +++++-
>  hw/pci.h                |    1 +
>  hw/pcie.c               |   11 +++++------
>  hw/pcie.h               |    2 --
>  hw/xio3130_downstream.c |    2 +-
>  hw/xio3130_upstream.c   |    3 ---
>  6 files changed, 12 insertions(+), 13 deletions(-)
> 
> diff --git a/hw/pci.c b/hw/pci.c
> index 0cb4117..eb21848 100644
> --- a/hw/pci.c
> +++ b/hw/pci.c
> @@ -137,7 +137,11 @@ static void pci_update_irq_status(PCIDevice *dev)
>      }
>  }
>  
> -static void pci_device_reset(PCIDevice *dev)
> +/*
> + * This function is called on #RST and FLR.
> + * FLR if PCI_EXP_DEVCTL_BCR_FLR is set
> + */
> +void pci_device_reset(PCIDevice *dev)
>  {
>      int r;
>      /* TODO: call the below unconditionally once all pci devices
> diff --git a/hw/pci.h b/hw/pci.h
> index 17744dc..6e80b08 100644
> --- a/hw/pci.h
> +++ b/hw/pci.h
> @@ -237,6 +237,7 @@ void pci_bus_hotplug(PCIBus *bus, pci_hotplug_fn hotplug, 
> DeviceState *dev);
>  PCIBus *pci_register_bus(DeviceState *parent, const char *name,
>                           pci_set_irq_fn set_irq, pci_map_irq_fn map_irq,
>                           void *irq_opaque, int devfn_min, int nirq);
> +void pci_device_reset(PCIDevice *dev);
>  void pci_bus_reset(PCIBus *bus);
>  
>  void pci_bus_set_mem_base(PCIBus *bus, target_phys_addr_t base);
> diff --git a/hw/pcie.c b/hw/pcie.c
> index d1f0086..b93fba4 100644
> --- a/hw/pcie.c
> +++ b/hw/pcie.c
> @@ -380,10 +380,6 @@ void pcie_cap_root_reset(PCIDevice *dev)
>      pci_set_word(dev->config + dev->exp.exp_cap + PCI_EXP_RTCTL, 0);
>  }
>  
> -/*
> - * TODO: implement FLR:
> - * Right now sets the bit which indicates FLR is supported.
> - */
>  /* function level reset(FLR) */
>  void pcie_cap_flr_init(PCIDevice *dev)
>  {
> @@ -403,8 +399,11 @@ void pcie_cap_flr_write_config(PCIDevice *dev,
>                                 uint32_t addr, uint32_t val, int len)
>  {
>      uint8_t *devctl = dev->config + dev->exp.exp_cap + PCI_EXP_DEVCTL;
> -    if (pci_word_test_and_clear_mask(devctl, PCI_EXP_DEVCTL_BCR_FLR)) {
> -        /* TODO: implement FLR */
> +    if (pci_get_word(devctl) & PCI_EXP_DEVCTL_BCR_FLR) {
> +        /* don't clear PCI_EXP_DEVCTL_BCR_FLR to tell reset handler
> +           that this reset is FLR */

Rewritten this comment:

>         /* Clear PCI_EXP_DEVCTL_BCR_FLR after invoking the reset handler
>            so the handler can detect FLR by looking at this bit. */

This was the intent, yes?

> +        pci_device_reset(dev);
> +        pci_word_test_and_clear_mask(devctl, PCI_EXP_DEVCTL_BCR_FLR);
>      }
>  }
>  
> diff --git a/hw/pcie.h b/hw/pcie.h
> index 7baa813..bc909e2 100644
> --- a/hw/pcie.h
> +++ b/hw/pcie.h
> @@ -63,8 +63,6 @@ struct PCIExpressDevice {
>      /* Offset of express capability in config space */
>      uint8_t exp_cap;
>  
> -    /* TODO FLR */
> -
>      /* SLOT */
>      unsigned int hpev_intx;     /* INTx for hot plug event (0-3:INT[A-D]#)
>                                   * default is 0 = INTA#
> diff --git a/hw/xio3130_downstream.c b/hw/xio3130_downstream.c
> index 1a2d258..5aa6a6b 100644
> --- a/hw/xio3130_downstream.c
> +++ b/hw/xio3130_downstream.c
> @@ -89,7 +89,7 @@ static int xio3130_downstream_initfn(PCIDevice *d)
>      if (rc < 0) {
>          goto err_msi;
>      }
> -    pcie_cap_flr_init(d);       /* TODO: implement FLR */
> +    pcie_cap_flr_init(d);
>      pcie_cap_deverr_init(d);
>      pcie_cap_slot_init(d, s->slot);
>      pcie_chassis_create(s->chassis);
> diff --git a/hw/xio3130_upstream.c b/hw/xio3130_upstream.c
> index 387bf6c..a7640f5 100644
> --- a/hw/xio3130_upstream.c
> +++ b/hw/xio3130_upstream.c
> @@ -85,10 +85,7 @@ static int xio3130_upstream_initfn(PCIDevice *d)
>      if (rc < 0) {
>          goto err_msi;
>      }
> -
> -    /* TODO: implement FLR */
>      pcie_cap_flr_init(d);
> -
>      pcie_cap_deverr_init(d);
>      rc = pcie_aer_init(d, XIO3130_AER_OFFSET);
>      if (rc < 0) {
> -- 
> 1.7.1.1